* [PATCH v5 0/2] Add support for NXP LPC18xx Watchdog timer
@ 2015-08-01 18:37 Ariel D'Alessandro
2015-08-01 18:37 ` [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver Ariel D'Alessandro
2015-08-01 18:37 ` [PATCH v5 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation Ariel D'Alessandro
0 siblings, 2 replies; 6+ messages in thread
From: Ariel D'Alessandro @ 2015-08-01 18:37 UTC (permalink / raw
To: linux-watchdog
Cc: wim, linux, ezequiel, linux-arm-kernel, manabian,
Ariel D'Alessandro
This patch series adds support for the watchdog timer found in NXP LPC
SoCs family which includes LPC18xx/LPC43xx. Other SoCs in that family may
share the same watchdog hardware.
Patchset is based on tag next-20150624 of the linux-next repository.
It has been successfully tested on a Hitex LPC4350 Evaluation Board and
on a CIAA NXP LPC4337 Board.
Changes since v4:
* Minor coding style fixes.
Changes since v3:
* Changed default timeout to 30.
* Minor changes.
Changes since v2:
* Changed config tristate to "LPC18xx/43xx".
* Added COMPILE_TEST as a dependency.
* Replaced raw_local_irq* calls by spinlock.
* Changed dt compatible string to "nxp,lpc1850-wwdt".
Changes since v1:
* Dropped "Windowed" term in Watchdog's name.
* Changed default timeout value from 1 to 5 because it was too tight.
* Fixed module remove function, since it was keeping the timer enabled. Warning
message was added.
* Changed dt compatible string to "nxp,lpc1850-wdt".
* Renamed clocks matching most of the other lpc18xx drivers.
Ariel D'Alessandro (2):
watchdog: NXP LPC18xx Watchdog Timer Driver
DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation
.../devicetree/bindings/watchdog/lpc18xx-wdt.txt | 19 ++
drivers/watchdog/Kconfig | 11 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/lpc18xx_wdt.c | 340 +++++++++++++++++++++
4 files changed, 371 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
create mode 100644 drivers/watchdog/lpc18xx_wdt.c
--
1.9.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver
2015-08-01 18:37 [PATCH v5 0/2] Add support for NXP LPC18xx Watchdog timer Ariel D'Alessandro
@ 2015-08-01 18:37 ` Ariel D'Alessandro
2015-08-01 18:52 ` Guenter Roeck
2015-08-01 18:37 ` [PATCH v5 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation Ariel D'Alessandro
1 sibling, 1 reply; 6+ messages in thread
From: Ariel D'Alessandro @ 2015-08-01 18:37 UTC (permalink / raw
To: linux-watchdog
Cc: wim, linux, ezequiel, linux-arm-kernel, manabian,
Ariel D'Alessandro
This commit adds support for the watchdog timer found in NXP LPC SoCs
family, which includes LPC18xx/LPC43xx. Other SoCs in that family may
share the same watchdog hardware.
Watchdog driver registers a restart handler that will restart the system
by performing an incorrect feed after ensuring the watchdog is enabled in
reset mode.
As watchdog cannot be disabled in hardware, driver's stop routine will
regularly send a keepalive ping using a timer.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
---
drivers/watchdog/Kconfig | 11 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/lpc18xx_wdt.c | 340 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 352 insertions(+)
create mode 100644 drivers/watchdog/lpc18xx_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 742fbbc..af5e2e3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -547,6 +547,17 @@ config DIGICOLOR_WATCHDOG
To compile this driver as a module, choose M here: the
module will be called digicolor_wdt.
+config LPC18XX_WATCHDOG
+ tristate "LPC18xx/43xx Watchdog"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
+ processors.
+ To compile this driver as a module, choose M here: the
+ module will be called lpc18xx_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 59ea9a1..1b0ef48 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
+obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/lpc18xx_wdt.c b/drivers/watchdog/lpc18xx_wdt.c
new file mode 100644
index 0000000..00ff5bd
--- /dev/null
+++ b/drivers/watchdog/lpc18xx_wdt.c
@@ -0,0 +1,340 @@
+/*
+ * NXP LPC18xx Watchdog Timer (WDT)
+ *
+ * Copyright (c) 2015 Ariel D'Alessandro <ariel@vanguardiasur.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * Notes
+ * -----
+ * The Watchdog consists of a fixed divide-by-4 clock pre-scaler and a 24-bit
+ * counter which decrements on every clock cycle.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+/* Registers */
+#define LPC18XX_WDT_MOD 0x00
+#define LPC18XX_WDT_MOD_WDEN BIT(0)
+#define LPC18XX_WDT_MOD_WDRESET BIT(1)
+
+#define LPC18XX_WDT_TC 0x04
+#define LPC18XX_WDT_TC_MIN 0xff
+#define LPC18XX_WDT_TC_MAX 0xffffff
+
+#define LPC18XX_WDT_FEED 0x08
+#define LPC18XX_WDT_FEED_MAGIC1 0xaa
+#define LPC18XX_WDT_FEED_MAGIC2 0x55
+
+#define LPC18XX_WDT_TV 0x0c
+
+/* Clock pre-scaler */
+#define LPC18XX_WDT_CLK_DIV 4
+
+/* Timeout values in seconds */
+#define LPC18XX_WDT_DEF_TIMEOUT 30U
+
+static int heartbeat;
+module_param(heartbeat, int, 0);
+MODULE_PARM_DESC(heartbeat, "Watchdog heartbeats in seconds (default="
+ __MODULE_STRING(LPC18XX_WDT_DEF_TIMEOUT) ")");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct lpc18xx_wdt_dev {
+ struct watchdog_device wdt_dev;
+ struct clk *reg_clk;
+ struct clk *wdt_clk;
+ unsigned long clk_rate;
+ void __iomem *base;
+ struct timer_list timer;
+ struct notifier_block restart_handler;
+ spinlock_t lock;
+};
+
+static int lpc18xx_wdt_feed(struct watchdog_device *wdt_dev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned long flags;
+
+ /*
+ * An abort condition will occur if an interrupt happens during the feed
+ * sequence.
+ */
+ spin_lock_irqsave(&lpc18xx_wdt->lock, flags);
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags);
+
+ return 0;
+}
+
+static void lpc18xx_wdt_timer_feed(unsigned long data)
+{
+ struct watchdog_device *wdt_dev = (struct watchdog_device *)data;
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+
+ lpc18xx_wdt_feed(wdt_dev);
+
+ /* Use safe value (1/2 of real timeout) */
+ mod_timer(&lpc18xx_wdt->timer, jiffies +
+ msecs_to_jiffies((wdt_dev->timeout * MSEC_PER_SEC) / 2));
+}
+
+/*
+ * Since LPC18xx Watchdog cannot be disabled in hardware, we must keep feeding
+ * it with a timer until userspace watchdog software takes over.
+ */
+static int lpc18xx_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ lpc18xx_wdt_timer_feed((unsigned long)wdt_dev);
+
+ return 0;
+}
+
+static void __lpc18xx_wdt_set_timeout(struct lpc18xx_wdt_dev *lpc18xx_wdt)
+{
+ unsigned int val;
+
+ val = DIV_ROUND_UP(lpc18xx_wdt->wdt_dev.timeout * lpc18xx_wdt->clk_rate,
+ LPC18XX_WDT_CLK_DIV);
+ writel(val, lpc18xx_wdt->base + LPC18XX_WDT_TC);
+}
+
+static int lpc18xx_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int new_timeout)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+
+ lpc18xx_wdt->wdt_dev.timeout = new_timeout;
+ __lpc18xx_wdt_set_timeout(lpc18xx_wdt);
+
+ return 0;
+}
+
+unsigned int lpc18xx_wdt_get_timeleft(struct watchdog_device *wdt_dev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned int val;
+
+ val = readl(lpc18xx_wdt->base + LPC18XX_WDT_TV);
+ return (val * LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate;
+}
+
+static int lpc18xx_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned int val;
+
+ if (timer_pending(&lpc18xx_wdt->timer))
+ del_timer(&lpc18xx_wdt->timer);
+
+ val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+ val |= LPC18XX_WDT_MOD_WDEN;
+ val |= LPC18XX_WDT_MOD_WDRESET;
+ writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+
+ /*
+ * Setting the WDEN bit in the WDMOD register is not sufficient to
+ * enable the Watchdog. A valid feed sequence must be completed after
+ * setting WDEN before the Watchdog is capable of generating a reset.
+ */
+ lpc18xx_wdt_feed(wdt_dev);
+
+ return 0;
+}
+
+static struct watchdog_info lpc18xx_wdt_info = {
+ .identity = "NXP LPC18xx Watchdog",
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops lpc18xx_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = lpc18xx_wdt_start,
+ .stop = lpc18xx_wdt_stop,
+ .ping = lpc18xx_wdt_feed,
+ .set_timeout = lpc18xx_wdt_set_timeout,
+ .get_timeleft = lpc18xx_wdt_get_timeleft,
+};
+
+static int lpc18xx_wdt_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = container_of(this,
+ struct lpc18xx_wdt_dev, restart_handler);
+ unsigned long flags;
+ int val;
+
+ /*
+ * Incorrect feed sequence causes immediate watchdog reset if enabled.
+ */
+ spin_lock_irqsave(&lpc18xx_wdt->lock, flags);
+
+ val = readl(lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+ val |= LPC18XX_WDT_MOD_WDEN;
+ val |= LPC18XX_WDT_MOD_WDRESET;
+ writel(val, lpc18xx_wdt->base + LPC18XX_WDT_MOD);
+
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ writel(LPC18XX_WDT_FEED_MAGIC2, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+ writel(LPC18XX_WDT_FEED_MAGIC1, lpc18xx_wdt->base + LPC18XX_WDT_FEED);
+
+ spin_unlock_irqrestore(&lpc18xx_wdt->lock, flags);
+
+ return NOTIFY_OK;
+}
+
+static int lpc18xx_wdt_probe(struct platform_device *pdev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ lpc18xx_wdt = devm_kzalloc(dev, sizeof(*lpc18xx_wdt), GFP_KERNEL);
+ if (!lpc18xx_wdt)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ lpc18xx_wdt->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(lpc18xx_wdt->base))
+ return PTR_ERR(lpc18xx_wdt->base);
+
+ lpc18xx_wdt->reg_clk = devm_clk_get(dev, "reg");
+ if (IS_ERR(lpc18xx_wdt->reg_clk)) {
+ dev_err(dev, "failed to get the reg clock\n");
+ return PTR_ERR(lpc18xx_wdt->reg_clk);
+ }
+
+ lpc18xx_wdt->wdt_clk = devm_clk_get(dev, "wdtclk");
+ if (IS_ERR(lpc18xx_wdt->wdt_clk)) {
+ dev_err(dev, "failed to get the wdt clock\n");
+ return PTR_ERR(lpc18xx_wdt->wdt_clk);
+ }
+
+ ret = clk_prepare_enable(lpc18xx_wdt->reg_clk);
+ if (ret) {
+ dev_err(dev, "could not prepare or enable sys clock\n");
+ return ret;
+ }
+
+ ret = clk_prepare_enable(lpc18xx_wdt->wdt_clk);
+ if (ret) {
+ dev_err(dev, "could not prepare or enable wdt clock\n");
+ goto disable_reg_clk;
+ }
+
+ /* We use the clock rate to calculate timeouts */
+ lpc18xx_wdt->clk_rate = clk_get_rate(lpc18xx_wdt->wdt_clk);
+ if (lpc18xx_wdt->clk_rate == 0) {
+ dev_err(dev, "failed to get clock rate\n");
+ ret = -EINVAL;
+ goto disable_wdt_clk;
+ }
+
+ lpc18xx_wdt->wdt_dev.info = &lpc18xx_wdt_info;
+ lpc18xx_wdt->wdt_dev.ops = &lpc18xx_wdt_ops;
+
+ lpc18xx_wdt->wdt_dev.min_timeout = DIV_ROUND_UP(LPC18XX_WDT_TC_MIN *
+ LPC18XX_WDT_CLK_DIV, lpc18xx_wdt->clk_rate);
+
+ lpc18xx_wdt->wdt_dev.max_timeout = (LPC18XX_WDT_TC_MAX *
+ LPC18XX_WDT_CLK_DIV) / lpc18xx_wdt->clk_rate;
+
+ lpc18xx_wdt->wdt_dev.timeout = min(lpc18xx_wdt->wdt_dev.max_timeout,
+ LPC18XX_WDT_DEF_TIMEOUT);
+
+ spin_lock_init(&lpc18xx_wdt->lock);
+
+ lpc18xx_wdt->wdt_dev.parent = dev;
+ watchdog_set_drvdata(&lpc18xx_wdt->wdt_dev, lpc18xx_wdt);
+
+ ret = watchdog_init_timeout(&lpc18xx_wdt->wdt_dev, heartbeat, dev);
+
+ __lpc18xx_wdt_set_timeout(lpc18xx_wdt);
+
+ setup_timer(&lpc18xx_wdt->timer, lpc18xx_wdt_timer_feed,
+ (unsigned long)&lpc18xx_wdt->wdt_dev);
+
+ watchdog_set_nowayout(&lpc18xx_wdt->wdt_dev, nowayout);
+
+ platform_set_drvdata(pdev, lpc18xx_wdt);
+
+ ret = watchdog_register_device(&lpc18xx_wdt->wdt_dev);
+ if (ret)
+ goto disable_wdt_clk;
+
+ lpc18xx_wdt->restart_handler.notifier_call = lpc18xx_wdt_restart;
+ lpc18xx_wdt->restart_handler.priority = 128;
+ ret = register_restart_handler(&lpc18xx_wdt->restart_handler);
+ if (ret)
+ dev_warn(dev, "failed to register restart handler: %d\n", ret);
+
+ return 0;
+
+disable_wdt_clk:
+ clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
+disable_reg_clk:
+ clk_disable_unprepare(lpc18xx_wdt->reg_clk);
+ return ret;
+}
+
+static void lpc18xx_wdt_shutdown(struct platform_device *pdev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev);
+
+ lpc18xx_wdt_stop(&lpc18xx_wdt->wdt_dev);
+}
+
+static int lpc18xx_wdt_remove(struct platform_device *pdev)
+{
+ struct lpc18xx_wdt_dev *lpc18xx_wdt = platform_get_drvdata(pdev);
+
+ unregister_restart_handler(&lpc18xx_wdt->restart_handler);
+
+ dev_warn(&pdev->dev, "I quit now, hardware will probably reboot!\n");
+ del_timer(&lpc18xx_wdt->timer);
+
+ watchdog_unregister_device(&lpc18xx_wdt->wdt_dev);
+ clk_disable_unprepare(lpc18xx_wdt->wdt_clk);
+ clk_disable_unprepare(lpc18xx_wdt->reg_clk);
+
+ return 0;
+}
+
+static const struct of_device_id lpc18xx_wdt_match[] = {
+ { .compatible = "nxp,lpc1850-wwdt" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, lpc18xx_wdt_match);
+
+static struct platform_driver lpc18xx_wdt_driver = {
+ .driver = {
+ .name = "lpc18xx-wdt",
+ .of_match_table = lpc18xx_wdt_match,
+ },
+ .probe = lpc18xx_wdt_probe,
+ .remove = lpc18xx_wdt_remove,
+ .shutdown = lpc18xx_wdt_shutdown,
+};
+module_platform_driver(lpc18xx_wdt_driver);
+
+MODULE_AUTHOR("Ariel D'Alessandro <ariel@vanguardiasur.com.ar>");
+MODULE_DESCRIPTION("NXP LPC18xx Watchdog Timer Driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v5 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation
2015-08-01 18:37 [PATCH v5 0/2] Add support for NXP LPC18xx Watchdog timer Ariel D'Alessandro
2015-08-01 18:37 ` [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver Ariel D'Alessandro
@ 2015-08-01 18:37 ` Ariel D'Alessandro
2015-08-01 18:52 ` Guenter Roeck
1 sibling, 1 reply; 6+ messages in thread
From: Ariel D'Alessandro @ 2015-08-01 18:37 UTC (permalink / raw
To: linux-watchdog
Cc: wim, linux, ezequiel, linux-arm-kernel, manabian,
Ariel D'Alessandro
Add the devicetree binding document for NXP LPC18xx Watchdog Timer.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
---
.../devicetree/bindings/watchdog/lpc18xx-wdt.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
new file mode 100644
index 0000000..09f6b24
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/lpc18xx-wdt.txt
@@ -0,0 +1,19 @@
+* NXP LPC18xx Watchdog Timer (WDT)
+
+Required properties:
+- compatible: Should be "nxp,lpc1850-wwdt"
+- reg: Should contain WDT registers location and length
+- clocks: Must contain an entry for each entry in clock-names.
+- clock-names: Should contain "wdtclk" and "reg"; the watchdog counter
+ clock and register interface clock respectively.
+- interrupts: Should contain WDT interrupt
+
+Examples:
+
+watchdog@40080000 {
+ compatible = "nxp,lpc1850-wwdt";
+ reg = <0x40080000 0x24>;
+ clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>;
+ clock-names = "wdtclk", "reg";
+ interrupts = <49>;
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver
2015-08-01 18:37 ` [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver Ariel D'Alessandro
@ 2015-08-01 18:52 ` Guenter Roeck
2015-08-20 19:54 ` Ezequiel Garcia
0 siblings, 1 reply; 6+ messages in thread
From: Guenter Roeck @ 2015-08-01 18:52 UTC (permalink / raw
To: Ariel D'Alessandro, linux-watchdog
Cc: wim, ezequiel, linux-arm-kernel, manabian
On 08/01/2015 11:37 AM, Ariel D'Alessandro wrote:
> This commit adds support for the watchdog timer found in NXP LPC SoCs
> family, which includes LPC18xx/LPC43xx. Other SoCs in that family may
> share the same watchdog hardware.
>
> Watchdog driver registers a restart handler that will restart the system
> by performing an incorrect feed after ensuring the watchdog is enabled in
> reset mode.
>
> As watchdog cannot be disabled in hardware, driver's stop routine will
> regularly send a keepalive ping using a timer.
>
> Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation
2015-08-01 18:37 ` [PATCH v5 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation Ariel D'Alessandro
@ 2015-08-01 18:52 ` Guenter Roeck
0 siblings, 0 replies; 6+ messages in thread
From: Guenter Roeck @ 2015-08-01 18:52 UTC (permalink / raw
To: Ariel D'Alessandro, linux-watchdog
Cc: wim, ezequiel, linux-arm-kernel, manabian
On 08/01/2015 11:37 AM, Ariel D'Alessandro wrote:
> Add the devicetree binding document for NXP LPC18xx Watchdog Timer.
>
> Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver
2015-08-01 18:52 ` Guenter Roeck
@ 2015-08-20 19:54 ` Ezequiel Garcia
0 siblings, 0 replies; 6+ messages in thread
From: Ezequiel Garcia @ 2015-08-20 19:54 UTC (permalink / raw
To: Guenter Roeck
Cc: Ariel D'Alessandro, linux-watchdog, wim, linux-arm-kernel,
Joachim Eastwood
On 1 August 2015 at 15:52, Guenter Roeck <linux@roeck-us.net> wrote:
> On 08/01/2015 11:37 AM, Ariel D'Alessandro wrote:
>>
>> This commit adds support for the watchdog timer found in NXP LPC SoCs
>> family, which includes LPC18xx/LPC43xx. Other SoCs in that family may
>> share the same watchdog hardware.
>>
>> Watchdog driver registers a restart handler that will restart the system
>> by performing an incorrect feed after ensuring the watchdog is enabled in
>> reset mode.
>>
>> As watchdog cannot be disabled in hardware, driver's stop routine will
>> regularly send a keepalive ping using a timer.
>>
>> Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
>
>
> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
>
Wim,
Any chances you pick this in time for the next merge window?
--
Ezequiel García, VanguardiaSur
www.vanguardiasur.com.ar
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2015-08-20 19:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-08-01 18:37 [PATCH v5 0/2] Add support for NXP LPC18xx Watchdog timer Ariel D'Alessandro
2015-08-01 18:37 ` [PATCH v5 1/2] watchdog: NXP LPC18xx Watchdog Timer Driver Ariel D'Alessandro
2015-08-01 18:52 ` Guenter Roeck
2015-08-20 19:54 ` Ezequiel Garcia
2015-08-01 18:37 ` [PATCH v5 2/2] DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation Ariel D'Alessandro
2015-08-01 18:52 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).