From: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
To: <ath12k@lists.infradead.org>
Cc: <linux-wireless@vger.kernel.org>,
Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Subject: [PATCH v2 4/4] wifi: ath12k: add multi device support for WBM idle ring buffer setup
Date: Tue, 30 Apr 2024 22:28:11 +0530 [thread overview]
Message-ID: <20240430165811.1377182-5-quic_periyasa@quicinc.com> (raw)
In-Reply-To: <20240430165811.1377182-1-quic_periyasa@quicinc.com>
Currently, inter device MLO is not supported. Therefore, the WBM idle ring
buffers choose the implicit return buffer manager (DEV0_IDLE_DESC_LIST).
However, this implicit return buffer manager design not meeting the
requirements to support inter device MLO. In inter device MLO, multiple
devices participate. The device specific WBM idle ring buffers transmit
to multiple device REO rings. To distinguish between device specific WBM
idle buffers, the setup configuration need to choose a different return
buffer manager based on the unique identifier (device index).
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
---
drivers/net/wireless/ath/ath12k/dp.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath12k/dp.c b/drivers/net/wireless/ath/ath12k/dp.c
index f41b3f9dac3d..72ea9baaf8d7 100644
--- a/drivers/net/wireless/ath/ath12k/dp.c
+++ b/drivers/net/wireless/ath/ath12k/dp.c
@@ -1589,6 +1589,24 @@ static int ath12k_dp_reoq_lut_setup(struct ath12k_base *ab)
return 0;
}
+static enum hal_rx_buf_return_buf_manager
+ath12k_dp_get_idle_link_rbm(struct ath12k_base *ab)
+{
+ switch (ab->device_id) {
+ case 0:
+ return HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST;
+ case 1:
+ return HAL_RX_BUF_RBM_WBM_DEV1_IDLE_DESC_LIST;
+ case 2:
+ return HAL_RX_BUF_RBM_WBM_DEV2_IDLE_DESC_LIST;
+ default:
+ ath12k_warn(ab, "invalid %d device id, so choose default rbm\n",
+ ab->device_id);
+ WARN_ON(1);
+ return HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST;
+ }
+}
+
int ath12k_dp_alloc(struct ath12k_base *ab)
{
struct ath12k_dp *dp = &ab->dp;
@@ -1605,7 +1623,7 @@ int ath12k_dp_alloc(struct ath12k_base *ab)
spin_lock_init(&dp->reo_cmd_lock);
dp->reo_cmd_cache_flush_count = 0;
- dp->idle_link_rbm = HAL_RX_BUF_RBM_WBM_DEV0_IDLE_DESC_LIST;
+ dp->idle_link_rbm = ath12k_dp_get_idle_link_rbm(ab);
ret = ath12k_wbm_idle_ring_setup(ab, &n_link_desc);
if (ret) {
--
2.34.1
next prev parent reply other threads:[~2024-04-30 16:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-30 16:58 [PATCH v2 0/4] wifi: ath12k: Add multi device support for WBM idle ring buffer setup Karthikeyan Periyasamy
2024-04-30 16:58 ` [PATCH v2 1/4] wifi: ath12k: Replace "chip" with "device" in hal Rx return buffer manager Karthikeyan Periyasamy
2024-04-30 18:42 ` Jeff Johnson
2024-05-02 10:36 ` Kalle Valo
2024-05-03 13:19 ` Kalle Valo
2024-04-30 16:58 ` [PATCH v2 2/4] wifi: ath12k: Refactor idle ring descriptor setup Karthikeyan Periyasamy
2024-04-30 18:43 ` Jeff Johnson
2024-04-30 16:58 ` [PATCH v2 3/4] wifi: ath12k: Introduce device index Karthikeyan Periyasamy
2024-04-30 18:44 ` Jeff Johnson
2024-04-30 16:58 ` Karthikeyan Periyasamy [this message]
2024-04-30 18:46 ` [PATCH v2 4/4] wifi: ath12k: add multi device support for WBM idle ring buffer setup Jeff Johnson
2024-05-02 10:37 ` Kalle Valo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240430165811.1377182-5-quic_periyasa@quicinc.com \
--to=quic_periyasa@quicinc.com \
--cc=ath12k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).