* wireless-regdb: Update regulatory rules for Argentina (AR) on 6GHz
@ 2023-11-03 21:04 Diego Garcia del Rio
0 siblings, 0 replies; only message in thread
From: Diego Garcia del Rio @ 2023-11-03 21:04 UTC (permalink / raw
To: linux-wireless; +Cc: wireless-regdb
Dear wireless-regdb / linux-wireless list members,
Argentina approved, in may 2023, the use of the 6GHz band for indoor
use. The specific decree can be consulted here :
https://www.boletinoficial.gob.ar/detalleAviso/primera/287126/20230524
but the specific technical addendum can be read at the link "Anexo 1"
at the end of that document.
The main changes are that operation on the band 5925-7125 MHz is
allowed at an EIRP of 30dBm for APs and 24dBm for clients. The APs
must also follow a maximum Power Spectral Density 5dBm/MHz and
clients must restrict themselves to -1 dBm/MHz EIRP PSD.
I wasn't sure how to express the PSD requirements in the txt file nor
how (or if its possible at all) to distinguish APs from clients.
The given PSD limits would mean 18dBm for an AP at 20MHz, and 3dBm for
each doubling in frequency, so a max of 27dBm for 160MHz APs) while
for clients, it would be 12dBm for a 20MHz channel and again, 3dBm
plus for each doubling in channel width (maximum of 21 dBm for a
160MHz channel).
I believe that basically copying the FCC restrictions for the 6GHz
band would probably be enough, but I was not 100% sure.
Thanks!
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2023-11-03 21:04 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-11-03 21:04 wireless-regdb: Update regulatory rules for Argentina (AR) on 6GHz Diego Garcia del Rio
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).