The set_config and init_valid_mask GPIO operations are usually very IC
specific. Allow IC drivers to provide these custom operations at
gpio-regmap registration.

Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
 drivers/gpio/gpio-regmap.c  | 49 +++++++++++++++++++++++++++++++++++++
 include/linux/gpio/regmap.h | 13 ++++++++++
 2 files changed, 62 insertions(+)

diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index 134cedf151a7..315285cacd3f 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -27,6 +27,10 @@ struct gpio_regmap {
 	int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
 			      unsigned int offset, unsigned int *reg,
 			      unsigned int *mask);
+	int (*set_config)(struct regmap *regmap, void *drvdata,
+			  unsigned int offset, unsigned long config);
+	int (*init_valid_mask)(struct regmap *regmap, void *drvdata,
+				unsigned long *valid_mask, unsigned int ngpios);
 
 	void *driver_data;
 };
@@ -39,6 +43,43 @@ static unsigned int gpio_regmap_addr(unsigned int addr)
 	return addr;
 }
 
+static int regmap_gpio_init_valid_mask(struct gpio_chip *gc,
+					unsigned long *valid_mask,
+					unsigned int ngpios)
+{
+	struct gpio_regmap *gpio;
+	void *drvdata;
+
+	gpio = gpiochip_get_data(gc);
+
+	if (!gpio->init_valid_mask) {
+		WARN_ON(!gpio->init_valid_mask);
+		return -EINVAL;
+	}
+
+	drvdata = gpio_regmap_get_drvdata(gpio);
+
+	return gpio->init_valid_mask(gpio->regmap, drvdata, valid_mask, ngpios);
+}
+
+static int gpio_regmap_set_config(struct gpio_chip *gc, unsigned int offset,
+				  unsigned long config)
+{
+	struct gpio_regmap *gpio;
+	void *drvdata;
+
+	gpio = gpiochip_get_data(gc);
+
+	if (!gpio->set_config) {
+		WARN_ON(!gpio->set_config);
+		return -EINVAL;
+	}
+
+	drvdata = gpio_regmap_get_drvdata(gpio);
+
+	return gpio->set_config(gpio->regmap, drvdata, offset, config);
+}
+
 static int gpio_regmap_simple_xlate(struct gpio_regmap *gpio,
 				    unsigned int base, unsigned int offset,
 				    unsigned int *reg, unsigned int *mask)
@@ -235,6 +276,8 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 	gpio->reg_clr_base = config->reg_clr_base;
 	gpio->reg_dir_in_base = config->reg_dir_in_base;
 	gpio->reg_dir_out_base = config->reg_dir_out_base;
+	gpio->set_config = config->set_config;
+	gpio->init_valid_mask = config->init_valid_mask;
 
 	/* if not set, assume there is only one register */
 	if (!gpio->ngpio_per_reg)
@@ -253,6 +296,10 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 	chip->ngpio = config->ngpio;
 	chip->names = config->names;
 	chip->label = config->label ?: dev_name(config->parent);
+	if (gpio->set_config)
+		chip->set_config = gpio_regmap_set_config;
+	if (gpio->init_valid_mask)
+		chip->init_valid_mask = regmap_gpio_init_valid_mask;
 
 #if defined(CONFIG_OF_GPIO)
 	/* gpiolib will use of_node of the parent if chip->of_node is NULL */
@@ -280,6 +327,8 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
 		chip->direction_output = gpio_regmap_direction_output;
 	}
 
+	gpio_regmap_set_drvdata(gpio, config->drvdata);
+
 	ret = gpiochip_add_data(chip, gpio);
 	if (ret < 0)
 		goto err_free_gpio;
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index 334dd928042b..c382a3caefc3 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -33,10 +33,18 @@ struct regmap;
  * @ngpio_per_reg:	Number of GPIOs per register
  * @irq_domain:		(Optional) IRQ domain if the controller is
  *			interrupt-capable
+ * @drvdata:		(Optional) Pointer to IC specific data which is
+ *			not used by gpio-remap but is provided "as is" to
+ *			the driver callback(s).
+ *
  * @reg_mask_xlate:     (Optional) Translates base address and GPIO
  *			offset to a register/bitmask pair. If not
  *			given the default gpio_regmap_simple_xlate()
  *			is used.
+ * @set_config:		(Optional) hook for all kinds of settings. Uses
+ *			the same packed config format as generic pinconf.
+ * @init_valid_mask:	(Optional) routine to initialize @valid_mask, to
+ *			be used if not all GPIOs are valid.
  *
  * The ->reg_mask_xlate translates a given base address and GPIO offset to
  * register and mask pair. The base address is one of the given register
@@ -74,10 +82,15 @@ struct gpio_regmap_config {
 	int reg_stride;
 	int ngpio_per_reg;
 	struct irq_domain *irq_domain;
+	void *drvdata;
 
 	int (*reg_mask_xlate)(struct gpio_regmap *gpio, unsigned int base,
 			      unsigned int offset, unsigned int *reg,
 			      unsigned int *mask);
+	int (*set_config)(struct regmap *regmap, void *drvdata,
+			  unsigned int offset, unsigned long config);
+	int (*init_valid_mask)(struct regmap *regmap, void *drvdata,
+				unsigned long *valid_mask, unsigned int ngpios);
 };
 
 struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config);

base-commit: d07f6ca923ea0927a1024dfccafc5b53b61cfecc
-- 
2.25.4


-- 
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]