From: Suganath prabu Subaramani <suganath-prabu.subramani@avagotech.com>
To: JBottomley@Parallels.com, jejb@kernel.org, hch@infradead.org
Cc: martin.petersen@oracle.com, linux-scsi@vger.kernel.org,
Sathya.Prakash@avagotech.com, kashyap.desai@avagotech.com,
krishnaraddi.mankani@avagotech.com, linux-kernel@vger.kernel.org,
suganath-prabu.subramani@avagotech.com,
chaitra.basappa@avagotech.com, sreekanth.reddy@avagotech.com
Subject: [mpt3sas driver 08/10] mpt3sas: Updated MPI Header to 2.00.42
Date: Thu, 28 Jan 2016 12:07:05 +0530 [thread overview]
Message-ID: <1453963027-19770-9-git-send-email-suganath-prabu.subramani@avagotech.com> (raw)
In-Reply-To: <1453963027-19770-1-git-send-email-suganath-prabu.subramani@avagotech.com>
From: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Updated MPI version and MPI header files.
Signed-off-by: Suganath prabu Subramani <suganath-prabu.subramani@avagotech.com>
Signed-off-by: Chaitra P B <chaitra.basappa@avagotech.com>
---
drivers/scsi/mpt3sas/mpi/mpi2.h | 8 +++++---
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 7 +++++--
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 3 ++-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_sas.h | 2 +-
5 files changed, 14 insertions(+), 8 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2.h b/drivers/scsi/mpt3sas/mpi/mpi2.h
index 367e6ac..dfad5b8 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
* scatter/gather formats.
* Creation Date: June 21, 2006
*
- * mpi2.h Version: 02.00.37
+ * mpi2.h Version: 02.00.39
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -94,10 +94,12 @@
* 06-13-14 02.00.35 Bumped MPI2_HEADER_VERSION_UNIT.
* 11-18-14 02.00.36 Updated copyright information.
* Bumped MPI2_HEADER_VERSION_UNIT.
- * 03-xx-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 03-16-15 02.00.37 Bumped MPI2_HEADER_VERSION_UNIT.
* Added Scratchpad registers to
* MPI2_SYSTEM_INTERFACE_REGS.
* Added MPI2_DIAG_SBR_RELOAD.
+ * 03-19-15 02.00.38 Bumped MPI2_HEADER_VERSION_UNIT.
+ * 05-25-15 02.00.39 Bumped MPI2_HEADER_VERSION_UNIT.
* --------------------------------------------------------------------------
*/
@@ -137,7 +139,7 @@
#define MPI2_VERSION_02_06 (0x0206)
/*Unit and Dev versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT (0x23)
+#define MPI2_HEADER_VERSION_UNIT (0x27)
#define MPI2_HEADER_VERSION_DEV (0x00)
#define MPI2_HEADER_VERSION_UNIT_MASK (0xFF00)
#define MPI2_HEADER_VERSION_UNIT_SHIFT (8)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
index 43a6fe9..9cf09bf 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
* Title: MPI Configuration messages and pages
* Creation Date: November 10, 2006
*
- * mpi2_cnfg.h Version: 02.00.31
+ * mpi2_cnfg.h Version: 02.00.33
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
@@ -182,8 +182,10 @@
* 11-18-14 02.00.30 Updated copyright information.
* Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
* Added AdapterOrderAux fields to BIOS Page 3.
- * 03-xx-15 02.00.31 Updated for MPI v2.6.
+ * 03-16-15 02.00.31 Updated for MPI v2.6.
* Added new SAS Phy Event codes
+ * 05-25-15 02.00.33 Added more defines for the BiosOptions field of
+ * MPI2_CONFIG_PAGE_BIOS_1.
* --------------------------------------------------------------------------
*/
@@ -1412,6 +1414,7 @@ typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
#define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
/*values for BIOS Page 1 BiosOptions field */
+#define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000)
#define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
#define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_init.h b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
index 4916699..c38f624 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_init.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_init.h
@@ -47,7 +47,8 @@
* 04-09-13 02.00.15 Added SCSIStatusQualifier field to MPI2_SCSI_IO_REPLY,
* replacing the Reserved4 field.
* 11-18-14 02.00.16 Updated copyright information.
- * 03-xx-15 02.00.17 Updated for MPI v2.6.
+ * 03-16-15 02.00.17 Updated for MPI v2.6.
+ * Added MPI26_SCSIIO_IOFLAGS_ESCAPE_PASSTHROUGH.
* Added MPI2_SEP_REQ_SLOTSTATUS_DEV_OFF and
* MPI2_SEP_REPLY_SLOTSTATUS_DEV_OFF.
* --------------------------------------------------------------------------
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
index 26e1ba4..cf510ed 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_ioc.h
@@ -134,7 +134,7 @@
* Added Encrypted Hash Extended Image.
* 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
* 11-18-14 02.00.25 Updated copyright information.
- * 03-xx-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
+ * 03-16-15 02.00.26 Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* Added MPI26_CTRL_OP_SHUTDOWN.
* --------------------------------------------------------------------------
diff --git a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
index 43dfeed..c10c2c0 100644
--- a/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt3sas/mpi/mpi2_sas.h
@@ -33,7 +33,7 @@
* 08-19-13 02.00.08 Made MPI2_SAS_OP_TRANSMIT_PORT_SELECT_SIGNAL obsolete
* for anything newer than MPI v2.0.
* 11-18-14 02.00.09 Updated copyright information.
- * 03-xx-145 02.00.10 Updated for MPI v2.6.
+ * 03-16-15 02.00.10 Updated for MPI v2.6.
* Added MPI2_SATA_PT_REQ_PT_FLAGS_FPDMA.
* --------------------------------------------------------------------------
*/
--
1.8.3.1
next prev parent reply other threads:[~2016-01-28 6:39 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-28 6:36 [mpt3sas driver patches 00/10] mpt3sas driver enhancements and Suganath prabu Subaramani
2016-01-28 6:36 ` [mpt3sas driver 01/10] mpt3sas: Added support for high port count HBA variants Suganath prabu Subaramani
2016-02-04 14:14 ` Tomas Henzl
2016-01-28 6:36 ` [mpt3sas driver 02/10] mpt3sas: Used IEEE SGL instead of MPI SGL while framing a SMP Passthrough request message Suganath prabu Subaramani
2016-01-28 9:16 ` Christoph Hellwig
2016-02-04 14:18 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 03/10] mpt3sas: Fix static analyzer(coverity) tool identified defects Suganath prabu Subaramani
2016-02-04 14:18 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 04/10] mpt3sas: Never block the Enclosure device Suganath prabu Subaramani
2016-02-04 14:19 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 05/10] mpt3sas: Make use of additional HighPriority credit message frames for sending SCSI IO's Suganath prabu Subaramani
2016-02-04 14:24 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 06/10] mpt3sas: Added smp_affinity_enable module parameter Suganath prabu Subaramani
2016-02-04 15:01 ` Tomas Henzl
2016-02-08 6:01 ` Suganath Prabu Subramani
2016-02-08 12:38 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 07/10] mpt3sas: Add support for configurable Chain Frame Size Suganath prabu Subaramani
2016-02-04 15:05 ` Tomas Henzl
2016-02-05 7:56 ` Sreekanth Reddy
2016-02-08 13:55 ` Tomas Henzl
2016-01-28 6:37 ` Suganath prabu Subaramani [this message]
2016-02-04 15:06 ` [mpt3sas driver 08/10] mpt3sas: Updated MPI Header to 2.00.42 Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 09/10] mpt3sas: Fix for Asynchronous completion of timedout IO and task abort of timedout IO Suganath prabu Subaramani
2016-02-04 15:07 ` Tomas Henzl
2016-01-28 6:37 ` [mpt3sas driver 10/10] mpt3sas: Updating mpt3sas driver version to 12.100.00.00 Suganath prabu Subaramani
2016-02-04 15:08 ` Tomas Henzl
2016-02-05 2:04 ` [mpt3sas driver patches 00/10] mpt3sas driver enhancements and Martin K. Petersen
2016-02-10 17:20 ` Martin K. Petersen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1453963027-19770-9-git-send-email-suganath-prabu.subramani@avagotech.com \
--to=suganath-prabu.subramani@avagotech.com \
--cc=JBottomley@Parallels.com \
--cc=Sathya.Prakash@avagotech.com \
--cc=chaitra.basappa@avagotech.com \
--cc=hch@infradead.org \
--cc=jejb@kernel.org \
--cc=kashyap.desai@avagotech.com \
--cc=krishnaraddi.mankani@avagotech.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=martin.petersen@oracle.com \
--cc=sreekanth.reddy@avagotech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).