From: Andy Yan <andy.yan@rock-chips.com>
To: robh+dt@kernel.org, arnd@arndb.de, john.stultz@linaro.org
Cc: moritz.fischer@ettus.com, matthias.bgg@gmail.com,
galak@codeaurora.org, ijc+devicetree@hellion.org.uk,
catalin.marinas@arm.com, heiko@sntech.de, sre@kernel.org,
dbaryshkov@gmail.com, alexandre.belloni@free-electrons.com,
jun.nie@linaro.org, pawel.moll@arm.com, will.deacon@arm.com,
linux-rockchip@lists.infradead.org, wxt@rock-chips.com,
devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
linux@arm.linux.org.uk, mbrugger@suse.com,
linux-arm-kernel@lists.infradead.org, lorenzo.pieralisi@arm.com,
linux-kernel@vger.kernel.org, richard@nod.at,
dwmw2@infradead.org, mark.rutland@arm.com,
Andy Yan <andy.yan@rock-chips.com>
Subject: [PATCH v3 0/4] add reboot mode driver
Date: Tue, 2 Feb 2016 17:56:21 +0800 [thread overview]
Message-ID: <1454406981-4692-1-git-send-email-andy.yan@rock-chips.com> (raw)
This driver parse the reboot commands like "reboot loader"
and "reboot recovery" to get a boot mode described in the
device tree , then call the corresponding write interfae
to store the boot mode in some place like special register
or ram , which can be read by the bootloader after system
reboot.
This is commonly done on Android based devices, in order to
reboot the device into fastboot or recovery mode.
Changes in v3:
- descirbe all reboot mode as properity instead of subnode
- add mask value for some platform which only use some bits of the register
to store boot mode magic value
- add rk3036 support
Changes in v2:
- move to dir drivers/power/reset/
- make syscon-reboot-mode a generic driver
- make this node as a subnode of PMU
- make this node as a subnode of pmugrf
Changes in v1:
- fix the embarrassed compile warning
- correct the maskrom magic number
- check for the normal reboot
- correct the maskrom magic number
- use macro defined in rockchip_boot-mode.h for reboot-mode DT node
Andy Yan (4):
dt-bindings: power: reset: add document for reboot-mode driver
power: reset: add reboot mode driver
ARM: dts: rockchip: add syscon-reboot-mode node
ARM64: dts: rockchip: add syscon-reboot-mode DT node
.../bindings/power/reset/reboot-mode.txt | 26 +++++
.../bindings/power/reset/syscon-reboot-mode.txt | 36 +++++++
arch/arm/boot/dts/rk3036.dtsi | 10 +-
arch/arm/boot/dts/rk3288.dtsi | 11 +++
arch/arm/boot/dts/rk3xxx.dtsi | 13 ++-
arch/arm64/boot/dts/rockchip/rk3368.dtsi | 14 ++-
drivers/power/reset/Kconfig | 16 ++++
drivers/power/reset/Makefile | 2 +
drivers/power/reset/reboot-mode.c | 105 +++++++++++++++++++++
drivers/power/reset/reboot-mode.h | 6 ++
drivers/power/reset/syscon-reboot-mode.c | 64 +++++++++++++
include/dt-bindings/soc/rockchip_boot-mode.h | 30 ++++++
12 files changed, 330 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/reset/reboot-mode.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
create mode 100644 drivers/power/reset/reboot-mode.c
create mode 100644 drivers/power/reset/reboot-mode.h
create mode 100644 drivers/power/reset/syscon-reboot-mode.c
create mode 100644 include/dt-bindings/soc/rockchip_boot-mode.h
--
1.9.1
next reply other threads:[~2016-02-02 9:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 9:56 Andy Yan [this message]
2016-02-02 9:59 ` [PATCH v3 1/4] dt-bindings: power: reset: add document for reboot-mode driver Andy Yan
2016-02-02 18:29 ` John Stultz
2016-02-04 23:08 ` Rob Herring
2016-02-04 23:46 ` John Stultz
2016-02-05 4:35 ` Rob Herring
2016-02-05 5:03 ` John Stultz
2016-02-11 17:04 ` Rob Herring
2016-02-15 9:43 ` Andy Yan
2016-02-02 10:02 ` [PATCH v3 2/4] power: reset: add reboot mode driver Andy Yan
2016-02-02 18:16 ` Moritz Fischer
2016-02-03 11:54 ` kbuild test robot
2016-02-02 10:10 ` [PATCH v3 3/4] ARM: dts: rockchip: add syscon-reboot-mode DT node Andy Yan
2016-02-02 10:13 ` [PATCH v3 4/4] ARM64: " Andy Yan
2016-02-03 2:07 ` Shawn Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454406981-4692-1-git-send-email-andy.yan@rock-chips.com \
--to=andy.yan@rock-chips.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=dbaryshkov@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=galak@codeaurora.org \
--cc=heiko@sntech.de \
--cc=ijc+devicetree@hellion.org.uk \
--cc=john.stultz@linaro.org \
--cc=jun.nie@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mbrugger@suse.com \
--cc=moritz.fischer@ettus.com \
--cc=pawel.moll@arm.com \
--cc=richard@nod.at \
--cc=robh+dt@kernel.org \
--cc=sre@kernel.org \
--cc=will.deacon@arm.com \
--cc=wxt@rock-chips.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).