From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S964833AbcBDKTi (ORCPT ); Thu, 4 Feb 2016 05:19:38 -0500 Received: from down.free-electrons.com ([37.187.137.238]:34539 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S933282AbcBDKH6 (ORCPT ); Thu, 4 Feb 2016 05:07:58 -0500 From: Boris Brezillon To: David Woodhouse , Brian Norris , linux-mtd@lists.infradead.org Cc: Daniel Mack , Haojian Zhuang , Robert Jarzmik , Kukjin Kim , Krzysztof Kozlowski , linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Ralf Baechle , linux-mips@linux-mips.org, Josh Wu , Ezequiel Garcia , Maxime Ripard , Chen-Yu Tsai , linux-sunxi@googlegroups.com, Stefan Agner , Kyungmin Park , Greg Kroah-Hartman , devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org, punnaiah choudary kalluri , Priit Laes , Boris Brezillon Subject: [PATCH v2 26/51] mtd: nand: bf5xx: switch to mtd_ooblayout_ops Date: Thu, 4 Feb 2016 11:06:49 +0100 Message-Id: <1454580434-32078-27-git-send-email-boris.brezillon@free-electrons.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1454580434-32078-1-git-send-email-boris.brezillon@free-electrons.com> References: <1454580434-32078-1-git-send-email-boris.brezillon@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Implementing the mtd_ooblayout_ops interface is the new way of exposing ECC/OOB layout to MTD users. Signed-off-by: Boris Brezillon --- drivers/mtd/nand/bf5xx_nand.c | 51 ++++++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 23 deletions(-) diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 7f6b30e..b38f414 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -109,28 +109,33 @@ static const unsigned short bfin_nfc_pin_req[] = 0}; #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC -static struct nand_ecclayout bootrom_ecclayout = { - .eccbytes = 24, - .eccpos = { - 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2, - 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2, - 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2, - 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2, - 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2, - 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2, - 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2, - 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2 - }, - .oobfree = { - { 0x8 * 0 + 3, 5 }, - { 0x8 * 1 + 3, 5 }, - { 0x8 * 2 + 3, 5 }, - { 0x8 * 3 + 3, 5 }, - { 0x8 * 4 + 3, 5 }, - { 0x8 * 5 + 3, 5 }, - { 0x8 * 6 + 3, 5 }, - { 0x8 * 7 + 3, 5 }, - } +static int bootrom_ooblayout_ecc(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = section * 8; + oobregion->length = 3; + + return 0; +} + +static int bootrom_ooblayout_free(struct mtd_info *mtd, int section, + struct mtd_oob_region *oobregion) +{ + if (section > 7) + return -ERANGE; + + oobregion->offset = (section * 8) + 3; + oobregion->length = 5; + + return 0; +} + +static const struct mtd_ooblayout_ops bootrom_ooblayout_ops = { + .ecc = bootrom_ooblayout_ecc, + .free = bootrom_ooblayout_free, }; #endif @@ -800,7 +805,7 @@ static int bf5xx_nand_probe(struct platform_device *pdev) /* setup hardware ECC data struct */ if (hardware_ecc) { #ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC - chip->ecc.layout = &bootrom_ecclayout; + mtd_set_ooblayout(mtd, &bootrom_ooblayout_ops); #endif chip->read_buf = bf5xx_nand_dma_read_buf; chip->write_buf = bf5xx_nand_dma_write_buf; -- 2.1.4