On Thu, Feb 04, 2016 at 12:33:50AM +0100, Krzysztof Adamski wrote: > sunxi_pmx_set accepts pin number and then calculates offset by > subtracting pin_base from it. sunxi_pinctrl_gpio_get, on the other hand, > gets offset so we have to convert it to pin number so we won't get > negative value in sunxi_pmx_set. > > This was only used on A10 so far, where there is only one GPIO chip with > pin_base set to 0 so it didn't matter. However H3 also requires this > workaround but have two pinmux sections, triggering problem for PL port. > > Signed-off-by: Krzysztof Adamski Acked-by: Maxime Ripard Thanks! Maxime -- Maxime Ripard, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com