From: "Thomas Weißschuh" <linux@weissschuh.net>
To: platform-driver-x86@vger.kernel.org,
"Mark Gross" <mgross@linux.intel.com>,
"Hans de Goede" <hdegoede@redhat.com>,
linux-kernel@vger.kernel.org,
"Barnabás Pőcze" <pobrn@protonmail.com>
Cc: "Thomas Weißschuh" <linux@weissschuh.net>,
"Matthew Garrett" <mjg59@srcf.ucam.org>
Subject: [PATCH v2] platform/x86: add Gigabyte WMI temperature driver
Date: Mon, 5 Apr 2021 22:48:10 +0200 [thread overview]
Message-ID: <20210405204810.339763-1-linux@weissschuh.net> (raw)
In-Reply-To: <N6sOrC__lJeA1mtEKUtB18DPy9hp5bSjL9rq1TfOXiRE7IAO5aih5oyPEpq-vyqdZZsF4W8FIe-9GWB15lO-3fQlqjWQrMTlTJvqLBBGYOQ=@protonmail.com>
Changes since v1:
* Incorporate feedback from Barnabás Pőcze
* Use a WMI driver instead of a platform driver
* Let the kernel manage the driver lifecycle
* Fix errno/ACPI error confusion
* Fix resource cleanup
* Document reason for integer casting
Thank you Barnabás for your review, it is much appreciated.
-- >8 --
Tested with a X570 I Aorus Pro Wifi.
The mainboard contains an ITE IT8688E chip for management.
This chips is also handled by drivers/hwmon/i87.c but as it is also used
by the firmware itself it needs an ACPI driver.
Unfortunately not all sensor registers are handled by the firmware and even
less are exposed via WMI.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
---
drivers/platform/x86/Kconfig | 11 +++
drivers/platform/x86/Makefile | 1 +
drivers/platform/x86/gigabyte-wmi.c | 138 ++++++++++++++++++++++++++++
3 files changed, 150 insertions(+)
create mode 100644 drivers/platform/x86/gigabyte-wmi.c
diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index ad4e630e73e2..96622a2106f7 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -123,6 +123,17 @@ config XIAOMI_WMI
To compile this driver as a module, choose M here: the module will
be called xiaomi-wmi.
+config GIGABYTE_WMI
+ tristate "Gigabyte WMI temperature driver"
+ depends on ACPI_WMI
+ depends on HWMON
+ help
+ Say Y here if you want to support WMI-based temperature reporting on
+ Gigabyte mainboards.
+
+ To compile this driver as a module, choose M here: the module will
+ be called gigabyte-wmi.
+
config ACERHDF
tristate "Acer Aspire One temperature and fan driver"
depends on ACPI && THERMAL
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 60d554073749..1621ebfd04fd 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_INTEL_WMI_THUNDERBOLT) += intel-wmi-thunderbolt.o
obj-$(CONFIG_MXM_WMI) += mxm-wmi.o
obj-$(CONFIG_PEAQ_WMI) += peaq-wmi.o
obj-$(CONFIG_XIAOMI_WMI) += xiaomi-wmi.o
+obj-$(CONFIG_GIGABYTE_WMI) += gigabyte-wmi.o
# Acer
obj-$(CONFIG_ACERHDF) += acerhdf.o
diff --git a/drivers/platform/x86/gigabyte-wmi.c b/drivers/platform/x86/gigabyte-wmi.c
new file mode 100644
index 000000000000..8618363e3ccf
--- /dev/null
+++ b/drivers/platform/x86/gigabyte-wmi.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2021 Thomas Weißschuh <thomas@weissschuh.net>
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/acpi.h>
+#include <linux/hwmon.h>
+#include <linux/module.h>
+#include <linux/wmi.h>
+
+#define GIGABYTE_WMI_GUID "DEADBEEF-2001-0000-00A0-C90629100000"
+
+enum gigabyte_wmi_commandtype {
+ GIGABYTE_WMI_BUILD_DATE_QUERY = 0x1,
+ GIGABYTE_WMI_MAINBOARD_TYPE_QUERY = 0x2,
+ GIGABYTE_WMI_FIRMWARE_VERSION_QUERY = 0x4,
+ GIGABYTE_WMI_MAINBOARD_NAME_QUERY = 0x5,
+ GIGABYTE_WMI_TEMPERATURE_QUERY = 0x125,
+};
+
+struct gigabyte_wmi_args {
+ u32 arg1;
+};
+
+static int gigabyte_wmi_perform_query(enum gigabyte_wmi_commandtype command,
+ struct gigabyte_wmi_args *args, struct acpi_buffer *out)
+{
+ const struct acpi_buffer in = {
+ .length = sizeof(*args),
+ .pointer = args,
+ };
+
+ acpi_status ret = wmi_evaluate_method(GIGABYTE_WMI_GUID, 0x0, command, &in, out);
+ if (ret == AE_OK) {
+ return 0;
+ } else {
+ return -EIO;
+ };
+}
+
+static int gigabyte_wmi_query_integer(enum gigabyte_wmi_commandtype command,
+ struct gigabyte_wmi_args *args, u64 *res)
+{
+ union acpi_object *obj;
+ struct acpi_buffer result = { ACPI_ALLOCATE_BUFFER, NULL };
+ int ret;
+
+ ret = gigabyte_wmi_perform_query(command, args, &result);
+ if (ret) {
+ goto out;
+ }
+ obj = result.pointer;
+ if (obj && obj->type == ACPI_TYPE_INTEGER) {
+ *res = obj->integer.value;
+ ret = 0;
+ } else {
+ ret = -EIO;
+ }
+out:
+ kfree(result.pointer);
+ return ret;
+}
+
+static int gigabyte_wmi_temperature(u8 sensor, long *res)
+{
+ struct gigabyte_wmi_args args = {
+ .arg1 = sensor,
+ };
+ u64 temp;
+ acpi_status ret;
+
+ ret = gigabyte_wmi_query_integer(GIGABYTE_WMI_TEMPERATURE_QUERY, &args, &temp);
+ if (ret == 0)
+ *res = (s8) temp * 1000; // value is a signed 8-bit integer
+ return ret;
+}
+
+static int gigabyte_wmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ return gigabyte_wmi_temperature(channel, val);
+}
+
+static umode_t gigabyte_wmi_hwmon_is_visible(const void *data, enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ return 0444;
+}
+
+static const struct hwmon_channel_info *gigabyte_wmi_hwmon_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT,
+ HWMON_T_INPUT),
+ NULL,
+};
+
+static const struct hwmon_ops gigabyte_wmi_hwmon_ops = {
+ .read = gigabyte_wmi_hwmon_read,
+ .is_visible = gigabyte_wmi_hwmon_is_visible,
+};
+
+static const struct hwmon_chip_info gigabyte_wmi_hwmon_chip_info = {
+ .ops = &gigabyte_wmi_hwmon_ops,
+ .info = gigabyte_wmi_hwmon_info,
+};
+
+static int gigabyte_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+ struct device *hwmon_dev = devm_hwmon_device_register_with_info(&wdev->dev,
+ "gigabyte_wmi", NULL,
+ &gigabyte_wmi_hwmon_chip_info, NULL);
+
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct wmi_device_id gigabyte_wmi_id_table[] = {
+ { GIGABYTE_WMI_GUID, NULL },
+ { },
+};
+
+static struct wmi_driver gigabyte_wmi_driver = {
+ .driver = {
+ .name = "gigabyte-wmi",
+ },
+ .id_table = gigabyte_wmi_id_table,
+ .probe = gigabyte_wmi_probe,
+};
+module_wmi_driver(gigabyte_wmi_driver);
+
+MODULE_DEVICE_TABLE(wmi, gigabyte_wmi_id_table);
+MODULE_AUTHOR("Thomas Weißschuh <thomas@weissschuh.net>");
+MODULE_DESCRIPTION("Gigabyte Temperature WMI Driver");
+MODULE_LICENSE("GPL");
base-commit: 144c79ef33536b4ecb4951e07dbc1f2b7fa99d32
--
2.31.1
next prev parent reply other threads:[~2021-04-05 20:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-05 13:20 [PATCH] platform/x86: add Gigabyte WMI temperature driver Thomas Weißschuh
2021-04-05 17:13 ` Barnabás Pőcze
2021-04-05 20:48 ` Thomas Weißschuh [this message]
2021-04-07 15:54 ` [PATCH v2] " Hans de Goede
2021-04-07 19:43 ` Thomas Weißschuh
2021-04-08 9:36 ` Hans de Goede
2021-04-08 14:54 ` Thomas Weißschuh
2021-04-08 15:00 ` Guenter Roeck
2021-04-09 6:02 ` Thomas Weißschuh
2021-04-10 6:56 ` Guenter Roeck
2021-04-10 14:21 ` Hans de Goede
2021-04-10 14:40 ` [PATCH v3] " Thomas Weißschuh
2021-04-10 14:57 ` Hans de Goede
2021-04-10 15:21 ` Guenter Roeck
2021-04-10 15:15 ` Guenter Roeck
2021-04-10 15:23 ` Hans de Goede
2021-04-10 18:18 ` [PATCH v4] " Thomas Weißschuh
2021-04-11 0:58 ` Guenter Roeck
2021-04-11 14:05 ` Barnabás Pőcze
2021-04-12 12:35 ` [PATCH v5] " Thomas Weißschuh
2021-04-13 8:14 ` Hans de Goede
2021-04-07 18:27 ` [PATCH v2] " Barnabás Pőcze
2021-04-08 14:39 ` Thomas Weißschuh
2021-04-08 15:08 ` Guenter Roeck
2021-04-08 16:07 ` Hans de Goede
2021-04-10 6:40 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210405204810.339763-1-linux@weissschuh.net \
--to=linux@weissschuh.net \
--cc=hdegoede@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgross@linux.intel.com \
--cc=mjg59@srcf.ucam.org \
--cc=platform-driver-x86@vger.kernel.org \
--cc=pobrn@protonmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).