LKML Archive mirror
 help / color / mirror / Atom feed
From: Sumit Gupta <sumitg@nvidia.com>
To: <linux-tegra@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>, <robh+dt@kernel.org>
Cc: <kbuild-all@lists.01.org>, <sumitg@nvidia.com>,
	<bbasu@nvidia.com>, <vsethi@nvidia.com>, <jsequeira@nvidia.com>
Subject: [Patch v3 4/9] arm64: tegra: Add node for CBB1.0 in Tegra194 SOC
Date: Tue, 21 Dec 2021 18:21:12 +0530	[thread overview]
Message-ID: <20211221125117.6545-5-sumitg@nvidia.com> (raw)
In-Reply-To: <20211221125117.6545-1-sumitg@nvidia.com>

Adding device tree nodes to enable the driver for handling errors from
Control Backbone(CBB). CBB version 1.0 is used in Tegra194 SOC.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
---
 arch/arm64/boot/dts/nvidia/tegra194.dtsi | 62 +++++++++++++++++++++++-
 1 file changed, 61 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 851e049b3519..dddc4982b35a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -22,7 +22,7 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x0 0x40000000>;
 
-		misc@100000 {
+		apbmisc: misc@100000 {
 			compatible = "nvidia,tegra194-misc";
 			reg = <0x00100000 0xf000>,
 			      <0x0010f000 0x1000>;
@@ -87,6 +87,27 @@
 			gpio-controller;
 		};
 
+		cbb-noc@2300000 {
+			compatible = "nvidia,tegra194-cbb-noc";
+			reg = <0x02300000 0x1000>;
+			interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		axi2apb: axi2apb@2390000 {
+			compatible = "nvidia,tegra194-axi2apb";
+			reg = <0x2390000 0x1000>,
+			    <0x23a0000 0x1000>,
+			    <0x23b0000 0x1000>,
+			    <0x23c0000 0x1000>,
+			    <0x23d0000 0x1000>,
+			    <0x23e0000 0x1000>;
+			status = "okay";
+		 };
+
 		ethernet@2490000 {
 			compatible = "nvidia,tegra194-eqos",
 				     "nvidia,tegra186-eqos",
@@ -1359,6 +1380,26 @@
 			#phy-cells = <0>;
 		};
 
+		sce-noc@b600000 {
+			compatible = "nvidia,tegra194-sce-noc";
+			reg = <0xb600000 0x1000>;
+			interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
+		rce-noc@be00000 {
+			compatible = "nvidia,tegra194-rce-noc";
+			reg = <0xbe00000 0x1000>;
+			interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
 		hsp_aon: hsp@c150000 {
 			compatible = "nvidia,tegra194-hsp", "nvidia,tegra186-hsp";
 			reg = <0x0c150000 0x90000>;
@@ -1374,6 +1415,15 @@
 			#mbox-cells = <2>;
 		};
 
+		aon-noc@c600000 {
+			compatible = "nvidia,tegra194-aon-noc";
+			reg = <0xc600000 0x1000>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
 		gen2_i2c: i2c@c240000 {
 			compatible = "nvidia,tegra194-i2c";
 			reg = <0x0c240000 0x10000>;
@@ -1552,6 +1602,16 @@
 			status = "okay";
 		};
 
+		bpmp-noc@d600000 {
+			compatible = "nvidia,tegra194-bpmp-noc";
+			reg = <0xd600000 0x1000>;
+			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			nvidia,axi2apb = <&axi2apb>;
+			nvidia,apbmisc = <&apbmisc>;
+			status = "okay";
+		};
+
 		host1x@13e00000 {
 			compatible = "nvidia,tegra194-host1x";
 			reg = <0x13e00000 0x10000>,
-- 
2.17.1


  parent reply	other threads:[~2021-12-21 12:51 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-12-21 12:51 [Patch v3 0/9] CBB driver for Tegra194, Tegra234 & Tegra-Grace Sumit Gupta
2021-12-21 12:51 ` [Patch v3 1/9] soc: tegra: set ERD bit to mask inband errors Sumit Gupta
2021-12-21 12:51 ` [Patch v3 2/9] dt-bindings: arm: tegra: Add NVIDIA Tegra194 CBB1.0 binding Sumit Gupta
2021-12-21 12:51 ` [Patch v3 3/9] dt-bindings: arm: tegra: Add NVIDIA Tegra194 axi2apb binding Sumit Gupta
2021-12-22 18:35   ` Rob Herring
2021-12-23  8:24     ` Sumit Gupta
2021-12-27 15:41       ` Rob Herring
2022-02-23 13:22         ` Thierry Reding
2022-03-16  7:45           ` Sumit Gupta
2022-04-07  6:24             ` Sumit Gupta
2022-05-05 14:04               ` Rob Herring
2022-05-05 17:19                 ` Sumit Gupta
2021-12-21 12:51 ` Sumit Gupta [this message]
2021-12-21 12:51 ` [Patch v3 5/9] soc: tegra: cbb: Add CBB1.0 driver for Tegra194 Sumit Gupta
2021-12-21 12:51 ` [Patch v3 6/9] dt-bindings: arm: tegra: Add NVIDIA Tegra234 CBB2.0 binding Sumit Gupta
2021-12-21 12:51 ` [Patch v3 7/9] arm64: tegra: Add node for CBB2.0 in Tegra234 SOC Sumit Gupta
2021-12-21 12:51 ` [Patch v3 8/9] soc: tegra: cbb: Add driver for Tegra234 CBB2.0 Sumit Gupta
2021-12-21 12:51 ` [Patch v3 9/9] soc: tegra: cbb: Add support for tegra-grace SOC Sumit Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211221125117.6545-5-sumitg@nvidia.com \
    --to=sumitg@nvidia.com \
    --cc=bbasu@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=jsequeira@nvidia.com \
    --cc=kbuild-all@lists.01.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=vsethi@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).