From: Konrad Dybcio <konrad.dybcio@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Georgi Djakov <djakov@kernel.org>, Leo Yan <leo.yan@linaro.org>,
Evan Green <evgreen@chromium.org>
Cc: Marijn Suijten <marijn.suijten@somainline.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org, linux-pm@vger.kernel.org,
Konrad Dybcio <konrad.dybcio@linaro.org>
Subject: [PATCH v2 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts
Date: Fri, 09 Jun 2023 22:19:25 +0200 [thread overview]
Message-ID: <20230526-topic-smd_icc-v2-20-e5934b07d813@linaro.org> (raw)
In-Reply-To: <20230526-topic-smd_icc-v2-0-e5934b07d813@linaro.org>
Up until now, for some reason we've only been setting bandwidth values
on the active-only context. That pretty much meant that RPM could lift
all votes when entering sleep mode. Or never sleep at all.
That in turn could potentially break things like USB wakeup, as the
connection between APSS and SNoC/PNoC would simply be dead.
Set the values appropriately.
Fixes: 30c8fa3ec61a ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
drivers/interconnect/qcom/icc-rpm.c | 54 +++++++++++++++++++------------------
1 file changed, 28 insertions(+), 26 deletions(-)
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 3ac47b818afe..ac719013077e 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -205,34 +205,39 @@ static int qcom_icc_qos_set(struct icc_node *node)
}
}
-static int qcom_icc_rpm_set(struct qcom_icc_node *qn, u64 sum_bw)
+static int qcom_icc_rpm_set(struct qcom_icc_node *qn, u64 *bw)
{
- int ret = 0;
+ int ret, rpm_ctx = 0;
+ u64 bw_bps;
if (qn->qos.ap_owned)
return 0;
- if (qn->mas_rpm_id != -1) {
- ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
- RPM_BUS_MASTER_REQ,
- qn->mas_rpm_id,
- sum_bw);
- if (ret) {
- pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
- qn->mas_rpm_id, ret);
- return ret;
+ for (rpm_ctx = 0; rpm_ctx < QCOM_SMD_RPM_STATE_NUM; rpm_ctx++) {
+ bw_bps = icc_units_to_bps(bw[rpm_ctx]);
+
+ if (qn->mas_rpm_id != -1) {
+ ret = qcom_icc_rpm_smd_send(rpm_ctx,
+ RPM_BUS_MASTER_REQ,
+ qn->mas_rpm_id,
+ bw_bps);
+ if (ret) {
+ pr_err("qcom_icc_rpm_smd_send mas %d error %d\n",
+ qn->mas_rpm_id, ret);
+ return ret;
+ }
}
- }
- if (qn->slv_rpm_id != -1) {
- ret = qcom_icc_rpm_smd_send(QCOM_SMD_RPM_ACTIVE_STATE,
- RPM_BUS_SLAVE_REQ,
- qn->slv_rpm_id,
- sum_bw);
- if (ret) {
- pr_err("qcom_icc_rpm_smd_send slv %d error %d\n",
- qn->slv_rpm_id, ret);
- return ret;
+ if (qn->slv_rpm_id != -1) {
+ ret = qcom_icc_rpm_smd_send(rpm_ctx,
+ RPM_BUS_SLAVE_REQ,
+ qn->slv_rpm_id,
+ bw_bps);
+ if (ret) {
+ pr_err("qcom_icc_rpm_smd_send slv %d error %d\n",
+ qn->slv_rpm_id, ret);
+ return ret;
+ }
}
}
@@ -337,7 +342,6 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
struct qcom_icc_provider *qp;
struct qcom_icc_node *src_qn = NULL, *dst_qn = NULL;
struct icc_provider *provider;
- u64 sum_bw;
u64 active_rate, sleep_rate;
u64 agg_avg[QCOM_SMD_RPM_STATE_NUM], agg_peak[QCOM_SMD_RPM_STATE_NUM];
u64 max_agg_avg;
@@ -351,14 +355,12 @@ static int qcom_icc_set(struct icc_node *src, struct icc_node *dst)
qcom_icc_bus_aggregate(provider, agg_avg, agg_peak, &max_agg_avg);
- sum_bw = icc_units_to_bps(max_agg_avg);
-
- ret = qcom_icc_rpm_set(src_qn, sum_bw);
+ ret = qcom_icc_rpm_set(src_qn, agg_avg);
if (ret)
return ret;
if (dst_qn) {
- ret = qcom_icc_rpm_set(dst_qn, sum_bw);
+ ret = qcom_icc_rpm_set(dst_qn, agg_avg);
if (ret)
return ret;
}
--
2.41.0
next prev parent reply other threads:[~2023-06-09 20:21 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-09 20:19 [PATCH v2 00/22] Restructure RPM SMD ICC Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 01/22] soc: qcom: smd-rpm: Add QCOM_SMD_RPM_STATE_NUM Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 02/22] soc: qcom: smd-rpm: Use tabs for defines Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 03/22] clk: qcom: smd-rpm: Move some RPM resources to the common header Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 04/22] clk: qcom: smd-rpm: Export clock scaling availability Konrad Dybcio
2023-06-10 11:35 ` Stephan Gerhold
2023-06-10 12:15 ` Konrad Dybcio
2023-06-10 18:53 ` Konrad Dybcio
2023-06-10 19:25 ` Stephan Gerhold
2023-06-10 19:39 ` Konrad Dybcio
2023-06-11 9:20 ` Stephan Gerhold
2023-06-12 12:51 ` Konrad Dybcio
2023-06-12 17:03 ` Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 05/22] interconnect: qcom: icc-rpm: Introduce keep_alive Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 06/22] interconnect: qcom: icc-rpm: Allow negative QoS offset Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 07/22] interconnect: qcom: Fold smd-rpm.h into icc-rpm.h Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 08/22] interconnect: qcom: smd-rpm: Add rpmcc handling skeleton code Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 09/22] interconnect: qcom: Add missing headers in icc-rpm.h Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 10/22] interconnect: qcom: Define RPM bus clocks Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 11/22] interconnect: qcom: sdm660: Hook up RPM bus clk definitions Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 12/22] interconnect: qcom: msm8996: " Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 13/22] interconnect: qcom: qcs404: " Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 14/22] interconnect: qcom: msm8939: " Konrad Dybcio
2023-06-10 12:02 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 15/22] interconnect: qcom: msm8916: " Konrad Dybcio
2023-06-10 12:02 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 16/22] interconnect: qcom: qcm2290: " Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 17/22] interconnect: qcom: icc-rpm: Control bus rpmcc from icc Konrad Dybcio
2023-06-10 11:58 ` Stephan Gerhold
2023-06-10 12:14 ` Konrad Dybcio
2023-06-10 16:20 ` Stephan Gerhold
2023-06-10 17:54 ` Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 18/22] clk: qcom: smd-rpm: Separate out interconnect bus clocks Konrad Dybcio
2023-06-09 20:19 ` [PATCH v2 19/22] interconnect: qcom: icc-rpm: Fix bucket number Konrad Dybcio
2023-06-10 17:46 ` Stephan Gerhold
2023-06-10 17:53 ` Konrad Dybcio
2023-06-09 20:19 ` Konrad Dybcio [this message]
2023-06-10 18:00 ` [PATCH v2 20/22] interconnect: qcom: icc-rpm: Set bandwidth on both contexts Stephan Gerhold
2023-06-10 18:28 ` Konrad Dybcio
2023-06-10 18:43 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 21/22] interconnect: qcom: icc-rpm: Set correct bandwidth through RPM bw req Konrad Dybcio
2023-06-10 18:46 ` Stephan Gerhold
2023-06-09 20:19 ` [PATCH v2 22/22] interconnect: qcom: icc-rpm: Fix bandwidth calculations Konrad Dybcio
2023-06-10 19:06 ` Stephan Gerhold
2023-06-10 19:09 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230526-topic-smd_icc-v2-20-e5934b07d813@linaro.org \
--to=konrad.dybcio@linaro.org \
--cc=agross@kernel.org \
--cc=andersson@kernel.org \
--cc=djakov@kernel.org \
--cc=evgreen@chromium.org \
--cc=leo.yan@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).