From: Stefan Eichenberger <eichest@gmail.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, francesco.dolcini@toradex.com,
Stefan Eichenberger <stefan.eichenberger@toradex.com>
Subject: [PATCH v1 2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
Date: Fri, 1 Mar 2024 09:49:01 +0100 [thread overview]
Message-ID: <20240301084901.16656-3-eichest@gmail.com> (raw)
In-Reply-To: <20240301084901.16656-1-eichest@gmail.com>
From: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Previously, we had the sleep-moci pin set to always on. However, the
Dahlia carrier board supports disabling the sleep-moci when the system
is suspended to power down peripherals that support it. This reduces
overall power consumption. This commit adds support for this feature by
disabling the reg_force_sleep_moci regulator and adding a new regulator
for the USB hub that can be turned off when the system is suspended.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
---
.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 22 +++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index bf6d27e70bc4..bb066e726527 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -43,6 +43,15 @@ simple-audio-card,cpu {
sound-dai = <&mcasp0>;
};
};
+
+ reg_usb_hub: regulator-usb-hub {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ /* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+ gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+ regulator-boot-on;
+ regulator-name = "HUB_PWR_EN";
+ };
};
/* Verdin ETHs */
@@ -183,6 +192,11 @@ &ospi0 {
status = "okay";
};
+/* Do not force CTRL_SLEEP_MOCI# always enabled */
+®_force_sleep_moci {
+ status = "disabled";
+};
+
/* Verdin SD_1 */
&sdhci1 {
ti,driver-strength-ohm = <33>;
@@ -204,7 +218,15 @@ &usbss1 {
};
&usb1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
status = "okay";
+
+ usb-hub@1 {
+ compatible = "usb424,2744";
+ reg = <1>;
+ vdd-supply = <®_usb_hub>;
+ };
};
/* Verdin CTRL_WAKE1_MICO# */
--
2.40.1
next prev parent reply other threads:[~2024-03-01 8:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-01 8:48 [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support Stefan Eichenberger
2024-03-01 8:49 ` [PATCH v1 1/2] arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator Stefan Eichenberger
2024-03-01 9:00 ` Francesco Dolcini
2024-03-01 8:49 ` Stefan Eichenberger [this message]
2024-03-01 9:00 ` [PATCH v1 2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci Francesco Dolcini
2024-04-17 7:53 ` [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support Francesco Dolcini
2024-04-26 22:42 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301084901.16656-3-eichest@gmail.com \
--to=eichest@gmail.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=francesco.dolcini@toradex.com \
--cc=kristo@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=robh+dt@kernel.org \
--cc=stefan.eichenberger@toradex.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).