From: Alexandre Ghiti <alexghiti@rivosinc.com>
To: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Ryan Roberts <ryan.roberts@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Andrew Morton <akpm@linux-foundation.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-mm@kvack.org
Cc: Alexandre Ghiti <alexghiti@rivosinc.com>
Subject: [PATCH 9/9] mm: Use common huge_ptep_clear_flush() function for riscv/arm64
Date: Fri, 1 Mar 2024 10:14:55 +0100 [thread overview]
Message-ID: <20240301091455.246686-10-alexghiti@rivosinc.com> (raw)
In-Reply-To: <20240301091455.246686-1-alexghiti@rivosinc.com>
After some adjustments, both architectures have the same implementation
so move it to the generic code.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
---
arch/arm64/mm/hugetlbpage.c | 61 -------------------------------------
arch/riscv/mm/hugetlbpage.c | 51 -------------------------------
mm/contpte.c | 15 +++++++++
3 files changed, 15 insertions(+), 112 deletions(-)
diff --git a/arch/arm64/mm/hugetlbpage.c b/arch/arm64/mm/hugetlbpage.c
index d6ddaf282a94..8a273b9816d7 100644
--- a/arch/arm64/mm/hugetlbpage.c
+++ b/arch/arm64/mm/hugetlbpage.c
@@ -119,53 +119,6 @@ int find_num_contig(struct mm_struct *mm, unsigned long addr,
return CONT_PTES;
}
-/*
- * Changing some bits of contiguous entries requires us to follow a
- * Break-Before-Make approach, breaking the whole contiguous set
- * before we can change any entries. See ARM DDI 0487A.k_iss10775,
- * "Misprogramming of the Contiguous bit", page D4-1762.
- *
- * This helper performs the break step.
- */
-static pte_t get_clear_contig(struct mm_struct *mm,
- unsigned long addr,
- pte_t *ptep,
- unsigned long pgsize,
- unsigned long ncontig)
-{
- pte_t orig_pte = ptep_get(ptep);
- unsigned long i;
-
- for (i = 0; i < ncontig; i++, addr += pgsize, ptep++) {
- pte_t pte = ptep_get_and_clear(mm, addr, ptep);
-
- /*
- * If HW_AFDBM is enabled, then the HW could turn on
- * the dirty or accessed bit for any page in the set,
- * so check them all.
- */
- if (pte_dirty(pte))
- orig_pte = pte_mkdirty(orig_pte);
-
- if (pte_young(pte))
- orig_pte = pte_mkyoung(orig_pte);
- }
- return orig_pte;
-}
-
-static pte_t get_clear_contig_flush(struct mm_struct *mm,
- unsigned long addr,
- pte_t *ptep,
- unsigned long pgsize,
- unsigned long ncontig)
-{
- pte_t orig_pte = get_clear_contig(mm, addr, ptep, pgsize, ncontig);
- struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
-
- flush_tlb_range(&vma, addr, addr + (pgsize * ncontig));
- return orig_pte;
-}
-
pte_t *huge_pte_alloc(struct mm_struct *mm, struct vm_area_struct *vma,
unsigned long addr, unsigned long sz)
{
@@ -284,20 +237,6 @@ pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
return entry;
}
-pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
- unsigned long addr, pte_t *ptep)
-{
- struct mm_struct *mm = vma->vm_mm;
- size_t pgsize;
- int ncontig;
-
- if (!pte_cont(READ_ONCE(*ptep)))
- return ptep_clear_flush(vma, addr, ptep);
-
- ncontig = find_num_contig(mm, addr, ptep, &pgsize);
- return get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
-}
-
static int __init hugetlbpage_init(void)
{
if (pud_sect_supported())
diff --git a/arch/riscv/mm/hugetlbpage.c b/arch/riscv/mm/hugetlbpage.c
index e6cbb6fb2904..caf1db6f8f20 100644
--- a/arch/riscv/mm/hugetlbpage.c
+++ b/arch/riscv/mm/hugetlbpage.c
@@ -121,42 +121,6 @@ unsigned long hugetlb_mask_last_page(struct hstate *h)
return 0UL;
}
-static pte_t get_clear_contig(struct mm_struct *mm,
- unsigned long addr,
- pte_t *ptep,
- unsigned long pte_num)
-{
- pte_t orig_pte = ptep_get(ptep);
- unsigned long i;
-
- for (i = 0; i < pte_num; i++, addr += PAGE_SIZE, ptep++) {
- pte_t pte = ptep_get_and_clear(mm, addr, ptep);
-
- if (pte_dirty(pte))
- orig_pte = pte_mkdirty(orig_pte);
-
- if (pte_young(pte))
- orig_pte = pte_mkyoung(orig_pte);
- }
-
- return orig_pte;
-}
-
-static pte_t get_clear_contig_flush(struct mm_struct *mm,
- unsigned long addr,
- pte_t *ptep,
- unsigned long pte_num)
-{
- pte_t orig_pte = get_clear_contig(mm, addr, ptep, pte_num);
- struct vm_area_struct vma = TLB_FLUSH_VMA(mm, 0);
- bool valid = !pte_none(orig_pte);
-
- if (valid)
- flush_tlb_range(&vma, addr, addr + (PAGE_SIZE * pte_num));
-
- return orig_pte;
-}
-
pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
{
unsigned long order;
@@ -173,21 +137,6 @@ pte_t arch_make_huge_pte(pte_t entry, unsigned int shift, vm_flags_t flags)
return entry;
}
-pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
- unsigned long addr,
- pte_t *ptep)
-{
- pte_t pte = ptep_get(ptep);
- int pte_num;
-
- if (!pte_napot(pte))
- return ptep_clear_flush(vma, addr, ptep);
-
- pte_num = arch_contpte_get_num_contig(vma->vm_mm, addr, ptep, 0, NULL);
-
- return get_clear_contig_flush(vma->vm_mm, addr, ptep, pte_num);
-}
-
static bool is_napot_size(unsigned long size)
{
unsigned long order;
diff --git a/mm/contpte.c b/mm/contpte.c
index f7f26d2cfa23..445e5ebe46b4 100644
--- a/mm/contpte.c
+++ b/mm/contpte.c
@@ -23,6 +23,7 @@
* huge_ptep_get_and_clear()
* huge_ptep_set_access_flags()
* huge_ptep_set_wrprotect()
+ * huge_ptep_clear_flush()
*/
pte_t huge_ptep_get(pte_t *ptep)
@@ -251,3 +252,17 @@ void huge_ptep_set_wrprotect(struct mm_struct *mm,
set_contptes(mm, addr, ptep, pte, ncontig, pgsize);
}
+
+pte_t huge_ptep_clear_flush(struct vm_area_struct *vma,
+ unsigned long addr, pte_t *ptep)
+{
+ struct mm_struct *mm = vma->vm_mm;
+ size_t pgsize;
+ int ncontig;
+
+ if (!pte_cont(ptep_get(ptep)))
+ return ptep_clear_flush(vma, addr, ptep);
+
+ ncontig = arch_contpte_get_num_contig(mm, addr, ptep, 0, &pgsize);
+ return get_clear_contig_flush(mm, addr, ptep, pgsize, ncontig);
+}
--
2.39.2
next prev parent reply other threads:[~2024-03-01 9:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-01 9:14 [PATCH 0/9] Merge arm64/riscv hugetlbfs contpte support Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 1/9] riscv: Restore the pfn in a NAPOT pte when manipulated by core mm code Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 2/9] riscv: Safely remove huge_pte_offset() when manipulating NAPOT ptes Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 3/9] mm: Use common huge_ptep_get() function for riscv/arm64 Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 4/9] mm: Use common set_huge_pte_at() " Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 5/9] mm: Use common huge_pte_clear() " Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 6/9] mm: Use common huge_ptep_get_and_clear() " Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 7/9] mm: Use common huge_ptep_set_access_flags() " Alexandre Ghiti
2024-03-01 9:14 ` [PATCH 8/9] mm: Use common huge_ptep_set_wrprotect() " Alexandre Ghiti
2024-03-01 9:14 ` Alexandre Ghiti [this message]
2024-03-01 10:45 ` [PATCH 0/9] Merge arm64/riscv hugetlbfs contpte support Ryan Roberts
2024-03-01 11:29 ` Alexandre Ghiti
2024-03-01 11:38 ` Ryan Roberts
2024-04-18 22:11 ` Palmer Dabbelt
2024-04-19 11:03 ` Will Deacon
2024-04-22 8:50 ` Alexandre Ghiti
2024-04-23 8:52 ` Ryan Roberts
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240301091455.246686-10-alexghiti@rivosinc.com \
--to=alexghiti@rivosinc.com \
--cc=akpm@linux-foundation.org \
--cc=aou@eecs.berkeley.edu \
--cc=catalin.marinas@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=ryan.roberts@arm.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).