From: "Rob Herring (Arm)" <robh@kernel.org>
To: "Russell King" <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
"Eric Dumazet" <edumazet@google.com>,
"Jakub Kicinski" <kuba@kernel.org>,
"Paolo Abeni" <pabeni@redhat.com>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Bharat Kumar Gogada" <bharat.kumar.gogada@amd.com>,
"Michal Simek" <michal.simek@amd.com>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kw@linux.com>,
"Vinod Koul" <vkoul@kernel.org>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Liam Girdwood" <lgirdwood@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Jonathan Hunter" <jonathanh@nvidia.com>
Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-phy@lists.infradead.org, linux-tegra@vger.kernel.org
Subject: [PATCH] dt-bindings: Drop unnecessary quotes on keys
Date: Fri, 26 Apr 2024 15:22:37 -0500 [thread overview]
Message-ID: <20240426202239.2837516-1-robh@kernel.org> (raw)
The yamllint quoted-strings check wasn't checking keys for quotes, but
support for checking keys was added in 1.34 release. Fix all the errors
found when enabling the check.
Clean-up the xilinx-versal-cpm formatting while we're here.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
Documentation/devicetree/bindings/net/sff,sfp.yaml | 12 ++++++------
.../devicetree/bindings/pci/xilinx-versal-cpm.yaml | 7 +++++--
.../devicetree/bindings/pci/xlnx,nwl-pcie.yaml | 2 +-
.../devicetree/bindings/phy/brcm,sata-phy.yaml | 8 ++++----
.../devicetree/bindings/regulator/ti,tps62864.yaml | 2 +-
.../bindings/soc/tegra/nvidia,tegra20-pmc.yaml | 6 +++---
Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml | 4 ++--
7 files changed, 22 insertions(+), 19 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index bf6cbc7c2ba3..90611b598d2b 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -29,39 +29,39 @@ properties:
allowable by a module in the slot, in milli-Watts. Presently, modules can
be up to 1W, 1.5W or 2W.
- "mod-def0-gpios":
+ mod-def0-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the MOD-DEF0 (AKA Mod_ABS) module
presence input gpio signal, active (module absent) high. Must not be
present for SFF modules
- "los-gpios":
+ los-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Receiver Loss of Signal Indication
input gpio signal, active (signal lost) high
- "tx-fault-gpios":
+ tx-fault-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Module Transmitter Fault input gpio
signal, active (fault condition) high
- "tx-disable-gpios":
+ tx-disable-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Transmitter Disable output gpio
signal, active (Tx disable) high
- "rate-select0-gpios":
+ rate-select0-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Rx Signaling Rate Select (AKA RS0)
output gpio signal, low - low Rx rate, high - high Rx rate Must not be
present for SFF modules
- "rate-select1-gpios":
+ rate-select1-gpios:
maxItems: 1
description:
GPIO phandle and a specifier of the Tx Signaling Rate Select (AKA RS1)
diff --git a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
index 4734be456bde..c41344f8a242 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
+++ b/Documentation/devicetree/bindings/pci/xilinx-versal-cpm.yaml
@@ -48,13 +48,16 @@ properties:
interrupt-controller:
description: Interrupt controller node for handling legacy PCI interrupts.
type: object
+ additionalProperties: false
+
properties:
"#address-cells":
const: 0
+
"#interrupt-cells":
const: 1
- "interrupt-controller": true
- additionalProperties: false
+
+ interrupt-controller: true
required:
- reg
diff --git a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
index 426f90a47f35..cbe832c23dae 100644
--- a/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/xlnx,nwl-pcie.yaml
@@ -84,7 +84,7 @@ properties:
"#interrupt-cells":
const: 1
- "interrupt-controller": true
+ interrupt-controller: true
required:
- "#address-cells"
diff --git a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
index 8467c8e6368c..439bda142764 100644
--- a/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
@@ -59,14 +59,14 @@ patternProperties:
"#phy-cells":
const: 0
- "brcm,enable-ssc":
+ brcm,enable-ssc:
$ref: /schemas/types.yaml#/definitions/flag
description: |
Use spread spectrum clocking (SSC) on this port
This property is not applicable for "brcm,iproc-ns2-sata-phy",
"brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
- "brcm,rxaeq-mode":
+ brcm,rxaeq-mode:
$ref: /schemas/types.yaml#/definitions/string
description:
String that indicates the desired RX equalizer mode.
@@ -75,7 +75,7 @@ patternProperties:
- auto
- manual
- "brcm,rxaeq-value":
+ brcm,rxaeq-value:
$ref: /schemas/types.yaml#/definitions/uint32
description: |
When 'brcm,rxaeq-mode' is set to "manual", provides the RX
@@ -83,7 +83,7 @@ patternProperties:
minimum: 0
maximum: 63
- "brcm,tx-amplitude-millivolt":
+ brcm,tx-amplitude-millivolt:
description: |
Transmit amplitude voltage in millivolt.
$ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
index 0f29c75f42ea..dddea27596e9 100644
--- a/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
+++ b/Documentation/devicetree/bindings/regulator/ti,tps62864.yaml
@@ -24,7 +24,7 @@ properties:
type: object
properties:
- "SW":
+ SW:
type: object
$ref: regulator.yaml#
unevaluatedProperties: false
diff --git a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
index b86f6f53ca95..7140c312d898 100644
--- a/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
+++ b/Documentation/devicetree/bindings/soc/tegra/nvidia,tegra20-pmc.yaml
@@ -365,9 +365,9 @@ allOf:
additionalProperties: false
dependencies:
- "nvidia,suspend-mode": ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
- "nvidia,core-pwr-off-time": ["nvidia,core-pwr-good-time"]
- "nvidia,cpu-pwr-off-time": ["nvidia,cpu-pwr-good-time"]
+ nvidia,suspend-mode: ["nvidia,core-pwr-off-time", "nvidia,cpu-pwr-off-time"]
+ nvidia,core-pwr-off-time: ["nvidia,core-pwr-good-time"]
+ nvidia,cpu-pwr-off-time: ["nvidia,cpu-pwr-good-time"]
examples:
- |
diff --git a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
index 50a3fd31241c..8b0d3d4be5d8 100644
--- a/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
+++ b/Documentation/devicetree/bindings/tpm/ibm,vtpm.yaml
@@ -33,13 +33,13 @@ properties:
reg:
maxItems: 1
- 'ibm,#dma-address-cells':
+ ibm,#dma-address-cells:
description:
number of cells that are used to encode the physical address field of
dma-window properties
$ref: /schemas/types.yaml#/definitions/uint32-array
- 'ibm,#dma-size-cells':
+ ibm,#dma-size-cells:
description:
number of cells that are used to encode the size field of
dma-window properties
--
2.43.0
next reply other threads:[~2024-04-26 20:23 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-26 20:22 Rob Herring (Arm) [this message]
2024-04-29 6:22 ` [PATCH] dt-bindings: Drop unnecessary quotes on keys Krzysztof Kozlowski
2024-04-29 14:45 ` Mark Brown
2024-04-29 15:05 ` Thierry Reding
2024-04-30 20:36 ` Rob Herring (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240426202239.2837516-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=bharat.kumar.gogada@amd.com \
--cc=bhelgaas@google.com \
--cc=broonie@kernel.org \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=jonathanh@nvidia.com \
--cc=kishon@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=kw@linux.com \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lpieralisi@kernel.org \
--cc=michal.simek@amd.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=thierry.reding@gmail.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).