* [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions.
@ 2016-01-02 3:12 Konstantin Shkolnyy
2016-01-14 17:45 ` Martyn Welch
0 siblings, 1 reply; 2+ messages in thread
From: Konstantin Shkolnyy @ 2016-01-02 3:12 UTC (permalink / raw
To: johan; +Cc: linux-usb, linux-kernel, Konstantin Shkolnyy
Change to use new 8-bit and 32-bit register access functions instead of
cp210x_get_config and cp210x_set_config.
Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
---
change in v3: Presented new function addition as a separate patch #1,
to simplify code review.
drivers/usb/serial/cp210x.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 7a91c6c..1339d77 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -787,10 +787,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
{
struct device *dev = &port->dev;
unsigned int cflag, modem_ctl[4];
- unsigned int baud;
+ u32 baud;
u16 bits;
- cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
+ cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
*baudp = baud;
@@ -937,8 +937,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
baud = cp210x_quantise_baudrate(baud);
dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
- if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
- sizeof(baud))) {
+ if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
if (old_termios)
baud = old_termios->c_ospeed;
@@ -1109,10 +1108,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
static int cp210x_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
- unsigned int control;
+ u8 control;
int result;
- cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
+ cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
|((control & CONTROL_RTS) ? TIOCM_RTS : 0)
--
1.8.4.5
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions.
2016-01-02 3:12 [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions Konstantin Shkolnyy
@ 2016-01-14 17:45 ` Martyn Welch
0 siblings, 0 replies; 2+ messages in thread
From: Martyn Welch @ 2016-01-14 17:45 UTC (permalink / raw
To: Konstantin Shkolnyy, johan; +Cc: linux-usb, linux-kernel
On 02/01/16 03:12, Konstantin Shkolnyy wrote:
> Change to use new 8-bit and 32-bit register access functions instead of
> cp210x_get_config and cp210x_set_config.
>
> Signed-off-by: Konstantin Shkolnyy <konstantin.shkolnyy@gmail.com>
Acked-by: Martyn Welch <martyn.welch@collabora.co.uk>
> ---
> change in v3: Presented new function addition as a separate patch #1,
> to simplify code review.
>
> drivers/usb/serial/cp210x.c | 11 +++++------
> 1 file changed, 5 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
> index 7a91c6c..1339d77 100644
> --- a/drivers/usb/serial/cp210x.c
> +++ b/drivers/usb/serial/cp210x.c
> @@ -787,10 +787,10 @@ static void cp210x_get_termios_port(struct usb_serial_port *port,
> {
> struct device *dev = &port->dev;
> unsigned int cflag, modem_ctl[4];
> - unsigned int baud;
> + u32 baud;
> u16 bits;
>
> - cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4);
> + cp210x_read_u32_reg(port, CP210X_GET_BAUDRATE, &baud);
>
> dev_dbg(dev, "%s - baud rate = %d\n", __func__, baud);
> *baudp = baud;
> @@ -937,8 +937,7 @@ static void cp210x_change_speed(struct tty_struct *tty,
> baud = cp210x_quantise_baudrate(baud);
>
> dev_dbg(&port->dev, "%s - setting baud rate to %u\n", __func__, baud);
> - if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud,
> - sizeof(baud))) {
> + if (cp210x_write_u32_reg(port, CP210X_SET_BAUDRATE, baud)) {
> dev_warn(&port->dev, "failed to set baud rate to %u\n", baud);
> if (old_termios)
> baud = old_termios->c_ospeed;
> @@ -1109,10 +1108,10 @@ static void cp210x_dtr_rts(struct usb_serial_port *p, int on)
> static int cp210x_tiocmget(struct tty_struct *tty)
> {
> struct usb_serial_port *port = tty->driver_data;
> - unsigned int control;
> + u8 control;
> int result;
>
> - cp210x_get_config(port, CP210X_GET_MDMSTS, &control, 1);
> + cp210x_read_u8_reg(port, CP210X_GET_MDMSTS, &control);
>
> result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
> |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-01-14 17:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-02 3:12 [PATCH v3 3/4] USB: serial: cp210x: Switch to new 8-bit and 32-bit register access functions Konstantin Shkolnyy
2016-01-14 17:45 ` Martyn Welch
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).