From: Hsin-Yi Wang <hsinyi@google.com>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: lvzhaoxiong <lvzhaoxiong@huaqin.corp-partner.google.com>,
mripard@kernel.org, airlied@gmail.com, daniel@ffwll.ch,
robh@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, dianders@google.com,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 2/2] drm/panel: kd101ne3: add new panel driver
Date: Tue, 23 Apr 2024 11:10:03 -0700 [thread overview]
Message-ID: <CACb=7PVTvV9nsFu1ZAXu7YTjSOAGZka+c__EJq3J3qgSJGEShw@mail.gmail.com> (raw)
In-Reply-To: <vbt2nxddw2dc7hkreq4iybv5zv5xyp32oajybeqsphgfrhzmn7@tskvckljmxpe>
On Thu, Apr 18, 2024 at 7:11 AM Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On Thu, Apr 18, 2024 at 09:11:37PM +0800, Hsin-Yi Wang wrote:
> > On Thu, Apr 18, 2024 at 7:46 PM Dmitry Baryshkov
> > <dmitry.baryshkov@linaro.org> wrote:
> > >
> > > On Thu, Apr 18, 2024 at 04:15:48PM +0800, lvzhaoxiong wrote:
> > > > The kingdisplay panel is based on JD9365DA controller.
> > > > Add a driver for it.
> > > >
> > > > Signed-off-by: lvzhaoxiong <lvzhaoxiong@huaqin.corp-partner.google.com>
> > > > ---
> > > > drivers/gpu/drm/panel/Kconfig | 9 +
> > > > drivers/gpu/drm/panel/Makefile | 1 +
> > > > .../drm/panel/panel-kingdisplay-kd101ne3.c | 607 ++++++++++++++++++
> > > > 3 files changed, 617 insertions(+)
> > > > create mode 100644 drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> > > >
> > > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > > > index 154f5bf82980..2c73086cf102 100644
> > > > --- a/drivers/gpu/drm/panel/Kconfig
> > > > +++ b/drivers/gpu/drm/panel/Kconfig
> > > > @@ -297,6 +297,15 @@ config DRM_PANEL_KINGDISPLAY_KD097D04
> > > > 24 bit RGB per pixel. It provides a MIPI DSI interface to
> > > > the host and has a built-in LED backlight.
> > > >
> > > > +config DRM_PANEL_KINGDISPLAY_KD101NE3
> > > > + tristate "Kingdisplay kd101ne3 panel"
> > > > + depends on OF
> > > > + depends on DRM_MIPI_DSI
> > > > + depends on BACKLIGHT_CLASS_DEVICE
> > > > + help
> > > > + Say Y if you want to enable support for panels based on the
> > > > + Kingdisplay kd101ne3 controller.
> > > > +
> > > > config DRM_PANEL_LEADTEK_LTK050H3146W
> > > > tristate "Leadtek LTK050H3146W panel"
> > > > depends on OF
> > > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > > > index 24a02655d726..cbd414b98bb0 100644
> > > > --- a/drivers/gpu/drm/panel/Makefile
> > > > +++ b/drivers/gpu/drm/panel/Makefile
> > > > @@ -30,6 +30,7 @@ obj-$(CONFIG_DRM_PANEL_JDI_LPM102A188A) += panel-jdi-lpm102a188a.o
> > > > obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
> > > > obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
> > > > obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
> > > > +obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD101NE3) += panel-kingdisplay-kd101ne3.o
> > > > obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
> > > > obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> > > > obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> > > > diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> > > > new file mode 100644
> > > > index 000000000000..dbf0992f8b81
> > > > --- /dev/null
> > > > +++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd101ne3.c
> > > > @@ -0,0 +1,607 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * Panels based on the JD9365DA display controller.
> > > > + * Author: Zhaoxiong Lv <lvzhaoxiong@huaqin.corp-partner.google.com>
> > > > + */
> > > > +
> > > > +#include <linux/delay.h>
> > > > +#include <linux/gpio/consumer.h>
> > > > +#include <linux/module.h>
> > > > +#include <linux/of.h>
> > > > +#include <linux/of_device.h>
> > > > +#include <linux/regulator/consumer.h>
> > > > +
> > > > +#include <drm/drm_connector.h>
> > > > +#include <drm/drm_crtc.h>
> > > > +#include <drm/drm_mipi_dsi.h>
> > > > +#include <drm/drm_panel.h>
> > > > +
> > > > +#include <video/mipi_display.h>
> > > > +
> > > > +struct panel_desc {
> > > > + const struct drm_display_mode *modes;
> > > > + unsigned int bpc;
> > > > +
> > > > + /**
> > > > + * @width_mm: width of the panel's active display area
> > > > + * @height_mm: height of the panel's active display area
> > > > + */
> > > > + struct {
> > > > + unsigned int width_mm;
> > > > + unsigned int height_mm;
> > >
> > > Please move to the declared mode;
> > >
> > > > + } size;
> > > > +
> > > > + unsigned long mode_flags;
> > > > + enum mipi_dsi_pixel_format format;
> > > > + const struct panel_init_cmd *init_cmds;
> > > > + unsigned int lanes;
> > > > + bool discharge_on_disable;
> > > > + bool lp11_before_reset;
> > > > +};
> > > > +
> > > > +struct kingdisplay_panel {
> > > > + struct drm_panel base;
> > > > + struct mipi_dsi_device *dsi;
> > > > +
> > > > + const struct panel_desc *desc;
> > > > +
> > > > + enum drm_panel_orientation orientation;
> > > > + struct regulator *pp3300;
> > > > + struct gpio_desc *enable_gpio;
> > > > +};
> > > > +
> > > > +enum dsi_cmd_type {
> > > > + INIT_DCS_CMD,
> > > > + DELAY_CMD,
> > > > +};
> > > > +
> > > > +struct panel_init_cmd {
> > > > + enum dsi_cmd_type type;
> > > > + size_t len;
> > > > + const char *data;
> > > > +};
> > > > +
> > > > +#define _INIT_DCS_CMD(...) { \
> > > > + .type = INIT_DCS_CMD, \
> > > > + .len = sizeof((char[]){__VA_ARGS__}), \
> > > > + .data = (char[]){__VA_ARGS__} }
> > > > +
> > > > +#define _INIT_DELAY_CMD(...) { \
> > > > + .type = DELAY_CMD,\
> > > > + .len = sizeof((char[]){__VA_ARGS__}), \
> > > > + .data = (char[]){__VA_ARGS__} }
> > >
> > > This is the third panel driver using the same appoach. Can you use
> > > mipi_dsi_generic_write_seq() instead of the huge table? Or if you prefer
> > > the table, we should extract this framework to a common helper.
> > > (my preference is shifted towards mipi_dsi_generic_write_seq()).
> > >
> > The drawback of mipi_dsi_generic_write_seq() is that it can cause the
> > kernel size grows a lot since every sequence will be expanded.
> >
> > Similar discussion in here:
> > https://lore.kernel.org/dri-devel/CAD=FV=Wju3WS45=EpXMUg7FjYDh3-=mvm_jS7TF1tsaAzbb4Uw@mail.gmail.com/
> >
> > This patch would increase the module size from 157K to 572K.
> > scripts/bloat-o-meter shows chg +235.95%.
> >
> > So maybe the common helper is better regarding the kernel module size?
>
> Yes, let's get a framework done in a useful way.
> I'd say, drop the _INIT_DELAY_CMD. msleep() and usleep_range() should be
> used instead (and it's up to the developer to select correct delay
> function).
>
> >
> > > > +
> > > > +static const struct panel_init_cmd kingdisplay_kd101ne3_init_cmd[] = {
> > > > + _INIT_DELAY_CMD(50),
> > > > + _INIT_DCS_CMD(0xE0, 0x00),
>
> [skipped the body of the table]
>
> > > > + _INIT_DCS_CMD(0x0E, 0x48),
> > > > +
> > > > + _INIT_DCS_CMD(0xE0, 0x00),
>
> > > > + _INIT_DCS_CMD(0X11),
>
> Also, at least this is mipi_dsi_dcs_exit_sleep_mode().
>
> > > > + /* T6: 120ms */
> > > > + _INIT_DELAY_CMD(120),
> > > > + _INIT_DCS_CMD(0X29),
>
> And this is mipi_dsi_dcs_set_display_on().
>
> Having a single table enourages people to put known commands into the
> table, the practice that must be frowned upon and forbidden.
>
> We have functions for some of the standard DCS commands. So, maybe
> instead of adding a single-table based approach we can improve
> mipi_dsi_generic_write_seq() to reduce the bloat. E.g. by moving the
> error handling to a common part of enable() / prepare() function.
>
For this panel, I think it can also refer to how
panel-kingdisplay-kd097d04.c does. Create the table for init cmd data,
not what operation to use, and use mipi_dsi_generic_write_seq() when
looping through the table.
> > > > + _INIT_DELAY_CMD(20),
> > > > + {},
> > > > +};
>
> --
> With best wishes
> Dmitry
next prev parent reply other threads:[~2024-04-23 18:10 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-18 8:15 [PATCH v1 0/2] Add kd101ne3 bindings and driver lvzhaoxiong
2024-04-18 8:15 ` [PATCH v1 1/2] dt-bindings: display: panel: Add KD101NE3-40TI support lvzhaoxiong
2024-04-18 22:59 ` Krzysztof Kozlowski
2024-04-18 8:15 ` [PATCH v1 2/2] drm/panel: kd101ne3: add new panel driver lvzhaoxiong
2024-04-18 11:46 ` Dmitry Baryshkov
2024-04-18 13:11 ` Hsin-Yi Wang
2024-04-18 14:11 ` Dmitry Baryshkov
2024-04-23 18:10 ` Hsin-Yi Wang [this message]
2024-04-23 20:41 ` Doug Anderson
2024-04-23 21:20 ` Dmitry Baryshkov
2024-04-24 21:04 ` Doug Anderson
2024-04-24 21:18 ` Hsin-Yi Wang
2024-04-24 21:49 ` Dmitry Baryshkov
2024-04-24 22:15 ` Hsin-Yi Wang
2024-04-24 22:50 ` Dmitry Baryshkov
2024-04-24 23:25 ` Doug Anderson
2024-04-24 23:37 ` Dmitry Baryshkov
2024-04-25 0:21 ` Doug Anderson
2024-04-24 22:27 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CACb=7PVTvV9nsFu1ZAXu7YTjSOAGZka+c__EJq3J3qgSJGEShw@mail.gmail.com' \
--to=hsinyi@google.com \
--cc=airlied@gmail.com \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dianders@google.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lvzhaoxiong@huaqin.corp-partner.google.com \
--cc=mripard@kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).