* [PATCH v2] arm64: dts: imx8mp-venice-gw74xx: update to revB PCB
@ 2023-06-06 15:26 Tim Harvey
2023-06-09 14:38 ` Shawn Guo
0 siblings, 1 reply; 3+ messages in thread
From: Tim Harvey @ 2023-06-06 15:26 UTC (permalink / raw)
To: linux-arm-kernel
Cc: Rob Herring, Krzysztof Kozlowski, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Li Yang,
devicetree, linux-kernel, Tim Harvey
Update the imx8mp-venice-gw74xx for revB:
- add CAN1
- add TIS-TPM on SPI2
- add FAN controller
- fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
backward compatible option)
- M2 socket GPIO's moved
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
---
v2:
- fix fan-controller unit-address
---
.../dts/freescale/imx8mp-venice-gw74xx.dts | 261 +++++++++++-------
1 file changed, 159 insertions(+), 102 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
index eb51d648359b..764ff8b5c01b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
@@ -125,12 +125,22 @@ reg_usb2_vbus: regulator-usb2 {
regulator-max-microvolt = <5000000>;
};
+ reg_can1_stby: regulator-can1-stby {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_can1>;
+ regulator-name = "can1_stby";
+ gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
reg_can2_stby: regulator-can2-stby {
compatible = "regulator-fixed";
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_can>;
+ pinctrl-0 = <&pinctrl_reg_can2>;
regulator-name = "can2_stby";
- gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ gpio = <&gpio5 5 GPIO_ACTIVE_LOW>;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
@@ -164,6 +174,21 @@ &A53_3 {
cpu-supply = <®_arm>;
};
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ tpm@0 {
+ compatible = "tcg,tpm_tis-spi";
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ reg = <0x0>;
+ spi-max-frequency = <36000000>;
+ };
+};
+
/* off-board header */
&ecspi2 {
pinctrl-names = "default";
@@ -204,6 +229,13 @@ fixed-link {
};
};
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_can1_stby>;
+ status = "okay";
+};
+
&flexcan2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
@@ -214,38 +246,38 @@ &flexcan2 {
&gpio1 {
gpio-line-names =
"", "", "", "", "", "", "", "",
- "", "", "dio0", "", "dio1", "", "", "",
+ "", "dio0", "", "dio1", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio2 {
gpio-line-names =
- "", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "pcie3_wdis#", "",
+ "", "", "", "", "", "", "m2_pin20", "",
+ "", "", "", "", "", "pcie1_wdis#", "pcie3_wdis#", "",
"", "", "pcie2_wdis#", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio3 {
gpio-line-names =
- "m2_gdis#", "", "", "", "", "", "", "m2_rst#",
+ "", "", "", "", "", "", "m2_rst", "",
+ "", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
- "m2_off#", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
};
&gpio4 {
gpio-line-names =
+ "", "", "m2_off#", "", "", "", "", "",
"", "", "", "", "", "", "", "",
- "", "", "", "", "", "", "", "",
- "", "", "", "", "m2_wdis#", "", "", "",
- "", "", "", "", "", "", "", "uart_rs485";
+ "", "", "m2_wdis#", "", "", "", "", "",
+ "", "", "", "", "", "", "", "rs485_en";
};
&gpio5 {
gpio-line-names =
- "uart_half", "uart_term", "", "", "", "", "", "",
+ "rs485_hd", "rs485_term", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "";
@@ -286,6 +318,12 @@ channel@8 {
label = "vdd_bat";
};
+ channel@16 {
+ gw,mode = <4>;
+ reg = <0x16>;
+ label = "fan_tach";
+ };
+
channel@82 {
gw,mode = <2>;
reg = <0x82>;
@@ -358,6 +396,11 @@ channel@a2 {
gw,voltage-divider-ohms = <10000 10000>;
};
};
+
+ fan-controller@a {
+ compatible = "gw,gsc-fan";
+ reg = <0x0a>;
+ };
};
gpio: gpio@23 {
@@ -369,85 +412,6 @@ gpio: gpio@23 {
interrupts = <4>;
};
- pmic@25 {
- compatible = "nxp,pca9450c";
- reg = <0x25>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pmic>;
- interrupt-parent = <&gpio3>;
- interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
-
- regulators {
- BUCK1 {
- regulator-name = "BUCK1";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1000000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- };
-
- reg_arm: BUCK2 {
- regulator-name = "BUCK2";
- regulator-min-microvolt = <720000>;
- regulator-max-microvolt = <1025000>;
- regulator-boot-on;
- regulator-always-on;
- regulator-ramp-delay = <3125>;
- nxp,dvs-run-voltage = <950000>;
- nxp,dvs-standby-voltage = <850000>;
- };
-
- BUCK4 {
- regulator-name = "BUCK4";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3600000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- BUCK5 {
- regulator-name = "BUCK5";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- BUCK6 {
- regulator-name = "BUCK6";
- regulator-min-microvolt = <1045000>;
- regulator-max-microvolt = <1155000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO1 {
- regulator-name = "LDO1";
- regulator-min-microvolt = <1650000>;
- regulator-max-microvolt = <1950000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO3 {
- regulator-name = "LDO3";
- regulator-min-microvolt = <1710000>;
- regulator-max-microvolt = <1890000>;
- regulator-boot-on;
- regulator-always-on;
- };
-
- LDO5 {
- regulator-name = "LDO5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
- };
-
eeprom@50 {
compatible = "atmel,24c02";
reg = <0x50>;
@@ -559,7 +523,6 @@ fixed-link {
};
};
-/* off-board header */
&i2c3 {
clock-frequency = <400000>;
pinctrl-names = "default", "gpio";
@@ -568,6 +531,85 @@ &i2c3 {
scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
status = "okay";
+
+ pmic@25 {
+ compatible = "nxp,pca9450c";
+ reg = <0x25>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pmic>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ reg_arm: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <720000>;
+ regulator-max-microvolt = <1025000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ };
+
+ BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1045000>;
+ regulator-max-microvolt = <1155000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1710000>;
+ regulator-max-microvolt = <1890000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
};
/* off-board header */
@@ -726,12 +768,14 @@ pinctrl_hog: hoggrp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000040 /* DIO0 */
MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000040 /* DIO1 */
- MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000040 /* M2SKT_OFF# */
- MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
+ MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x40000040 /* M2SKT_OFF# */
+ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
+ MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x40000040 /* M2SKT_PIN20 */
+ MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x40000040 /* M2SKT_PIN22 */
+ MX8MP_IOMUXC_SD2_CLK__GPIO2_IO13 0x40000150 /* PCIE1_WDIS# */
MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000150 /* PCIE3_WDIS# */
+ MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000150 /* PCIE2_WDIS# */
MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000040 /* M2SKT_RST# */
- MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000150 /* M2SKT_WDIS# */
- MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000150 /* M2SKT_GDIS# */
MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */
MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */
MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */
@@ -784,6 +828,13 @@ MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x140
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154
+ MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154
+ >;
+ };
+
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154
@@ -869,7 +920,7 @@ MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x10
pinctrl_pcie0: pciegrp {
fsl,pins = <
- MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x110
+ MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x106
>;
};
@@ -885,12 +936,18 @@ MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x140
>;
};
- pinctrl_reg_can: regcangrp {
+ pinctrl_reg_can1: regcan1grp {
fsl,pins = <
MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154
>;
};
+ pinctrl_reg_can2: regcan2grp {
+ fsl,pins = <
+ MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154
+ >;
+ };
+
pinctrl_reg_usb2: regusb2grp {
fsl,pins = <
MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x140
@@ -903,12 +960,12 @@ MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x110
>;
};
- pinctrl_sai2: sai2grp {
+ pinctrl_spi1: spi1grp {
fsl,pins = <
- MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC 0xd6
- MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 0xd6
- MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK 0xd6
- MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK 0xd6
+ MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x82
+ MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x82
+ MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x82
+ MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x140
>;
};
--
2.25.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mp-venice-gw74xx: update to revB PCB
2023-06-06 15:26 [PATCH v2] arm64: dts: imx8mp-venice-gw74xx: update to revB PCB Tim Harvey
@ 2023-06-09 14:38 ` Shawn Guo
2023-06-09 19:48 ` Tim Harvey
0 siblings, 1 reply; 3+ messages in thread
From: Shawn Guo @ 2023-06-09 14:38 UTC (permalink / raw)
To: Tim Harvey
Cc: linux-arm-kernel, Rob Herring, Krzysztof Kozlowski, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Li Yang,
devicetree, linux-kernel
On Tue, Jun 06, 2023 at 08:26:52AM -0700, Tim Harvey wrote:
> Update the imx8mp-venice-gw74xx for revB:
> - add CAN1
> - add TIS-TPM on SPI2
> - add FAN controller
> - fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
> backward compatible option)
> - M2 socket GPIO's moved
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
../arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts:402.4-17: Warning (reg_format): /soc@0/bus@30800000/i2c@30a20000/gsc@20/fan-controller@a:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
../arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts:400.20-403.5: Warning (avoid_default_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20/fan-controller@a: Relying on default #address-cells value
../arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts:400.20-403.5: Warning (avoid_default_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20/fan-controller@a: Relying on default #size-cells value
Shawn
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] arm64: dts: imx8mp-venice-gw74xx: update to revB PCB
2023-06-09 14:38 ` Shawn Guo
@ 2023-06-09 19:48 ` Tim Harvey
0 siblings, 0 replies; 3+ messages in thread
From: Tim Harvey @ 2023-06-09 19:48 UTC (permalink / raw)
To: Shawn Guo
Cc: linux-arm-kernel, Rob Herring, Krzysztof Kozlowski, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, NXP Linux Team, Li Yang,
devicetree, linux-kernel
On Fri, Jun 9, 2023 at 7:38 AM Shawn Guo <shawnguo@kernel.org> wrote:
>
> On Tue, Jun 06, 2023 at 08:26:52AM -0700, Tim Harvey wrote:
> > Update the imx8mp-venice-gw74xx for revB:
> > - add CAN1
> > - add TIS-TPM on SPI2
> > - add FAN controller
> > - fix PMIC I2C bus (revA PMIC I2C was non-functional so no need for
> > backward compatible option)
> > - M2 socket GPIO's moved
> >
> > Signed-off-by: Tim Harvey <tharvey@gateworks.com>
>
> ../arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts:402.4-17: Warning (reg_format): /soc@0/bus@30800000/i2c@30a20000/gsc@20/fan-controller@a:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
> arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> ../arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts:400.20-403.5: Warning (avoid_default_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20/fan-controller@a: Relying on default #address-cells value
> ../arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts:400.20-403.5: Warning (avoid_default_addr_size): /soc@0/bus@30800000/i2c@30a20000/gsc@20/fan-controller@a: Relying on default #size-cells value
>
Shawn,
Looks like I'm missing an '#address-cells' and '#size-cells' in the
gsc node. I will send a v3.
How do you filter through all the known (and ignored?) warnings that
are failing dtbs_check because various dt-binding yamls which are
either missing or need updates such as the following:
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
timer@302d0000: compatible: 'oneOf' conditional failed, one must be
fixed:
['fsl,imx8mp-gpt', 'fsl,imx6dl-gpt'] is too long
'fsl,imx1-gpt' was expected
'fsl,imx21-gpt' was expected
'fsl,imx27-gpt' was expected
'fsl,imx31-gpt' was expected
'fsl,imx8mp-gpt' is not one of ['fsl,imx25-gpt', 'fsl,imx50-gpt',
'fsl,imx51-gpt', 'fsl,imx53-gpt', 'fsl,imx6q-gpt']
'fsl,imx6dl-gpt' was expected
'fsl,imx8mp-gpt' is not one of ['fsl,imx6sl-gpt', 'fsl,imx6sx-gpt',
'fsl,imxrt1050-gpt', 'fsl,imxrt1170-gpt']
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/timer/fsl,imxgpt.yaml
^^^ get this for all the imx gpt timers
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
/soc@0/bus@30800000/spba-bus@30800000/spi@30820000/tpm@0: failed to
match any schema with compatible: ['tcg,tpm_tis-spi']
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
accelerometer@19: 'interrupt-names' does not match any of the regexes:
'pinctrl-[0-9]+'
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/iio/st,st-sensors.yaml
^^^ is 'interrupt-names = "INT1"' really invalid here?
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
switch@5f: Unevaluated properties are not allowed ('interrupt-parent',
'interrupts' were unexpected)
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
^^^ microchip,ksz.yaml doesn't describe interrupts yet the driver uses them
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
wifi@0: compatible: 'oneOf' conditional failed, one must be fixed:
['cypress,cyw4373-fmac'] is too short
'cypress,cyw4373-fmac' is not one of ['brcm,bcm4329-fmac',
'pci14e4,43dc', 'pci14e4,4464', 'pci14e4,4488', 'pci14e4,4425',
'pci14e4,4433']
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
^^^ This one I don't understand at all - brcm,bcm4329-fmac.yaml
defines 'cypress,cyw4373-fmac under oneOf/items/enum but not
oneOf/enum???
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
pcie@33800000: Unevaluated properties are not allowed
('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks'
were unexpected)
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
^^^ we get this on all imx with pcie
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
usb@32f10100: usb@38100000: Unevaluated properties are not allowed
('connector' was unexpected)
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
/usr/src/venice/linux-master/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb:
usb@38100000: Unevaluated properties are not allowed ('connector' was
unexpected)
From schema: /usr/src/venice/linux-master/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
^^^ fsl,imx8mp-dwc3.yaml doesn't document connector nodes
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dtb: /pps: failed
to match any schema with compatible: ['pps-gpio']
^^^ need a pps-gpio.yaml
Is there a way to skip certain schemas or some multi-line grep -v
pattern you are using?
I've noticed a lot of contributors putting time into dt-bindings to
pass schema checks and things are getting cleaned up fairly quickly.
Best Regards,
Tim
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2023-06-09 19:48 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-06-06 15:26 [PATCH v2] arm64: dts: imx8mp-venice-gw74xx: update to revB PCB Tim Harvey
2023-06-09 14:38 ` Shawn Guo
2023-06-09 19:48 ` Tim Harvey
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).