From: "Jonathan Neuschäfer" <j.neuschaefer@gmx.net>
To: Giulio Benetti <giulio.benetti@benettiengineering.com>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Jonathan Neuschäfer" <j.ne@posteo.net>,
"Henrik Rydberg" <rydberg@bitmath.org>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3 2/3] dt-bindings: touchscreen: Add HY46XX bindings
Date: Tue, 6 Apr 2021 15:37:11 +0200 [thread overview]
Message-ID: <YGxkB6icZSJfx/VB@latitude> (raw)
In-Reply-To: <20210402161627.2546145-3-giulio.benetti@benettiengineering.com>
[-- Attachment #1: Type: text/plain, Size: 756 bytes --]
In the binding:
> +properties:
> + compatible:
> + enum:
> + - hycon,hycon-hy4613
> + - hycon,hycon-hy4614
> + - hycon,hycon-hy4621
> + - hycon,hycon-hy4623
> + - hycon,hycon-hy4633
> + - hycon,hycon-hy4635
In the example:
> + hycon-hy4633@1c {
> + compatible = "hycon,hy4633";
> + reg = <0x1c>;
> + interrupt-parent = <&gpio2>;
> + interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
> + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
> + };
Rob's devicetree lint bot detected the mismatch in compatible string
here.
I personally think 'hycon,hy4633' looks better than 'hycon,hycon-hy4633',
because it isn't so redundant.
Best regards,
Jonathan Neuschäfer
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next prev parent reply other threads:[~2021-04-06 13:37 UTC|newest]
Thread overview: 69+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210305163834.70924-1-giulio.benetti@benettiengineering.com>
2021-03-05 16:38 ` [PATCH 1/3] dt-bindings: Add Hycon Technology vendor prefix Giulio Benetti
2021-03-05 17:25 ` Jonathan Neuschäfer
2021-03-05 17:33 ` Giulio Benetti
2021-03-05 19:32 ` Giulio Benetti
2021-03-05 16:38 ` [PATCH 2/3] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-03-05 19:34 ` Giulio Benetti
2021-03-06 19:28 ` Rob Herring
2021-03-06 19:41 ` Rob Herring
2021-04-01 18:37 ` Giulio Benetti
2021-04-01 22:24 ` Giulio Benetti
2021-04-01 23:03 ` [PATCH v2 0/3] Input: add Hycon HY46XX Touchscreen controller Giulio Benetti
2021-04-01 23:03 ` [PATCH v2 1/3] dt-bindings: Add Hycon Technology vendor prefix Giulio Benetti
2021-04-01 23:03 ` [PATCH v2 2/3] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-04-02 8:36 ` Jonathan Neuschäfer
2021-04-02 15:17 ` Giulio Benetti
2021-04-01 23:03 ` [PATCH v2 3/3] Input: add driver for the Hycon HY46XX touchpanel series Giulio Benetti
2021-04-02 8:59 ` Jonathan Neuschäfer
2021-04-02 15:23 ` Giulio Benetti
2021-04-02 16:16 ` [PATCH v3 0/3] Input: add Hycon HY46XX Touchscreen controller Giulio Benetti
2021-04-02 16:16 ` [PATCH v3 1/3] dt-bindings: Add Hycon Technology vendor prefix Giulio Benetti
2021-04-02 16:16 ` [PATCH v3 2/3] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-04-06 13:24 ` Rob Herring
2021-04-07 17:57 ` Giulio Benetti
2021-04-07 18:56 ` Rob Herring
2021-04-07 19:17 ` Giulio Benetti
2021-04-06 13:37 ` Jonathan Neuschäfer [this message]
2021-04-06 14:07 ` Giulio Benetti
2021-04-07 17:49 ` [PATCH v4 0/3] Input: add Hycon HY46XX Touchscreen controller Giulio Benetti
2021-04-07 17:49 ` [PATCH v4 1/3] dt-bindings: Add Hycon Technology vendor prefix Giulio Benetti
2021-04-08 20:16 ` Rob Herring
2021-04-07 17:49 ` [PATCH v4 2/3] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-04-08 20:21 ` Rob Herring
2021-04-11 11:37 ` Giulio Benetti
2021-04-11 11:48 ` [PATCH v5 0/3] Input: add Hycon HY46XX Touchscreen controller Giulio Benetti
2021-04-11 11:48 ` [PATCH v5 1/3] dt-bindings: Add Hycon Technology vendor prefix Giulio Benetti
2021-04-12 15:05 ` Rob Herring
2021-04-12 15:12 ` Giulio Benetti
2021-04-13 13:35 ` Rob Herring
2021-04-13 14:44 ` [PATCH v7 0/3] Input: add Hycon HY46XX Touchscreen controller Giulio Benetti
2021-04-13 14:44 ` [PATCH v7 1/3] dt-bindings: Add Hycon Technology vendor prefix Giulio Benetti
2021-04-14 5:44 ` Dmitry Torokhov
2021-04-13 14:44 ` [PATCH v7 2/3] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-04-13 16:36 ` Rob Herring
2021-04-14 5:44 ` Dmitry Torokhov
2021-04-13 14:44 ` [PATCH v7 3/3] Input: add driver for the Hycon HY46XX touchpanel series Giulio Benetti
2021-04-14 5:44 ` Dmitry Torokhov
2021-04-14 6:46 ` Peter Hutterer
2021-04-14 11:22 ` Giulio Benetti
2021-04-14 17:26 ` Dmitry Torokhov
2021-04-15 6:16 ` Peter Hutterer
2021-04-14 11:24 ` Giulio Benetti
2021-04-11 11:48 ` [PATCH v5 2/3] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-04-12 13:20 ` Rob Herring
2021-04-12 14:46 ` Rob Herring
2021-04-12 14:49 ` Giulio Benetti
2021-04-12 15:23 ` [PATCH v6 0/2] Input: add Hycon HY46XX Touchscreen controller Giulio Benetti
2021-04-12 15:23 ` [PATCH v6 1/2] dt-bindings: touchscreen: Add HY46XX bindings Giulio Benetti
2021-04-13 15:07 ` Rob Herring
2021-04-13 15:27 ` Giulio Benetti
2021-04-13 17:58 ` Rob Herring
2021-04-13 18:34 ` Giulio Benetti
2021-04-12 15:24 ` [PATCH v6 2/2] Input: add driver for the Hycon HY46XX touchpanel series Giulio Benetti
2021-04-11 11:48 ` [PATCH v5 3/3] " Giulio Benetti
2021-04-07 17:49 ` [PATCH v4 " Giulio Benetti
2021-04-02 16:16 ` [PATCH v3 " Giulio Benetti
2021-03-05 16:38 ` [PATCH " Giulio Benetti
2021-03-05 19:00 ` Dmitry Torokhov
2021-03-05 19:31 ` Giulio Benetti
2021-03-05 19:54 ` Giulio Benetti
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YGxkB6icZSJfx/VB@latitude \
--to=j.neuschaefer@gmx.net \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=giulio.benetti@benettiengineering.com \
--cc=j.ne@posteo.net \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rydberg@bitmath.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).