From: Jan Kiszka <jan.kiszka@siemens.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
linux-rtc@vger.kernel.org,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] rtc: pcf-8563: Report previously detected low-voltage via RTC_VL_BACKUP_LOW
Date: Mon, 12 Jun 2023 08:49:04 +0200 [thread overview]
Message-ID: <c195c196-d99b-9e17-3854-fc147ac2e447@siemens.com> (raw)
In-Reply-To: <202306112216153a75dfa3@mail.local>
On 12.06.23 00:16, Alexandre Belloni wrote:
> On 11/06/2023 18:28:22+0200, Jan Kiszka wrote:
>> On 11.06.23 17:11, Alexandre Belloni wrote:
>>> On 11/06/2023 15:38:04+0200, Jan Kiszka wrote:
>>>> On 10.06.23 10:31, Alexandre Belloni wrote:
>>>>> Hello Jan,
>>>>>
>>>>> On 09/06/2023 23:04:12+0200, Jan Kiszka wrote:
>>>>>> From: Jan Kiszka <jan.kiszka@siemens.com>
>>>>>>
>>>>>> The VL bit in the seconds register remains set only until seconds are
>>>>>> written under main power. As this often happens during boot-up after
>>>>>> picking up a network time, make sure to preserve the low battery state
>>>>>> across this, caching it and returning it via the RTC_VL_BACKUP_LOW bit.
>>>>>>
>>>>>> To permit userspace clearing this state during runtime, also implement
>>>>>> RTC_VL_CLR that works against the cached state.
>>>>>>
>>>>>> This is emulating RTCs which have a battery voltage check that works
>>>>>> under main power as well.
>>>>>>
>>>>>
>>>>> Emulating doesn't work well and I deliberately chose to not implement
>>>>> it. For example, in your scenario, if you boot twice without using
>>>>> VL_READ, you anyway have lost the information. This makes emulating
>>>>> unreliabl. The fix you need is in userspace where you have to ensure you
>>>>> read the status before setting the time.
>>>>
>>>> Then let's make sure the bit is also set in the hardware register. Then
>>>> also the reboot issue (which is practically a minor one) is solved. The
>>>> current situation is far from optimal.
>>>
>>> This doesn't work because then the time will be considered invalid. I'm
>>> not sure why you don't want to fix your userspace.
>>>
>>
>> Nope, that could be easily avoided in software. The actual problem is
>> that the VL bit is not settable (clear-on-write). And that means we
>> can't do anything about losing the low battery information across
>> reboots - but that's no difference to the situation with the existing
>> driver.
>>
>> There is no "fix" for userspace as there is no standard framework to
>> read-out the status early and retrieve it from there when the user asks
>> for it. That's best done in the kernel.
>
> That's not true, nothing prevents userspace from reading the battery
> status before setting the time and destroying the information which is
> exactly what you should be doing.
What is your "userspace"? Mine is stock Debian with systemd and
timesyncd enabled. But there is no framework to read the status early
enough and propagate that after timesyncd did its job. Any concrete
suggestion to "fix" userspace?
>
>>
>> In that light, I still believe my patch is an improvement over the
>> current situation without making anything worse.
>
> The information goes from behaving deterministically to being unreliable
> which makes the situation worse.
Nope, not at all. You already lose the VL bit today during reboot when
you have written a new value (which is standard). So this here is not
making things worse. It's rather improving the situation for the first
boot at least. Deterministically.
Jan
--
Siemens AG, Technology
Competence Center Embedded Linux
next prev parent reply other threads:[~2023-06-12 7:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-09 21:04 [PATCH] rtc: pcf-8563: Report previously detected low-voltage via RTC_VL_BACKUP_LOW Jan Kiszka
2023-06-10 8:31 ` Alexandre Belloni
2023-06-11 13:38 ` Jan Kiszka
2023-06-11 15:11 ` Alexandre Belloni
2023-06-11 16:28 ` Jan Kiszka
2023-06-11 22:16 ` Alexandre Belloni
2023-06-12 6:49 ` Jan Kiszka [this message]
2023-07-11 7:27 ` Jan Kiszka
2023-07-11 20:54 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c195c196-d99b-9e17-3854-fc147ac2e447@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=a.zummo@towertech.it \
--cc=alexandre.belloni@bootlin.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).