[lm-sensors] [PATCH v4 2/6] hwmon: (fam15h_power) Add compute unit accumulated power

From: Huang Rui <ray.huang@amd.com>
To: Guenter Roeck <linux@roeck-us.net>, Jean Delvare <jdelvare@suse.de>
Cc: lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
	spg_linux_kernel@amd.com,
	Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>,
	Borislav Petkov <bp@alien8.de>, Huang Rui <ray.huang@amd.com>
Subject: [lm-sensors] [PATCH v4 2/6] hwmon: (fam15h_power) Add compute unit accumulated power
Date: Fri, 11 Mar 2016 02:17:46 +0000	[thread overview]
Message-ID: <1457662670-3354-3-git-send-email-ray.huang@amd.com> (raw)
In-Reply-To: <1457662670-3354-1-git-send-email-ray.huang@amd.com>

This patch adds a member in fam15h_power_data which specifies the
compute unit accumulated power. It adds do_read_registers_on_cu to do
all the read to all MSRs and run it on one of the online cores on each
compute unit with smp_call_function_many(). This behavior can decrease
IPI numbers.

Suggested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Huang Rui <ray.huang@amd.com>
---
 drivers/hwmon/fam15h_power.c | 61 +++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c
index 4f695d8..c5e2297 100644
--- a/drivers/hwmon/fam15h_power.c
+++ b/drivers/hwmon/fam15h_power.c
@@ -25,6 +25,8 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
 #include <asm/processor.h>
 #include <asm/msr.h>
 
@@ -44,7 +46,9 @@ MODULE_LICENSE("GPL");
 
 #define FAM15H_MIN_NUM_ATTRS		2
 #define FAM15H_NUM_GROUPS		2
+#define MAX_CUS				8
 
+#define MSR_F15H_CU_PWR_ACCUMULATOR	0xc001007a
 #define MSR_F15H_CU_MAX_PWR_ACCUMULATOR	0xc001007b
 
 #define PCI_DEVICE_ID_AMD_15H_M70H_NB_F4 0x15b4
@@ -59,6 +63,8 @@ struct fam15h_power_data {
 	struct attribute_group group;
 	/* maximum accumulated power of a compute unit */
 	u64 max_cu_acc_power;
+	/* accumulated power of the compute units */
+	u64 cu_acc_power[MAX_CUS];
 };
 
 static ssize_t show_power(struct device *dev,
@@ -125,6 +131,59 @@ static ssize_t show_power_crit(struct device *dev,
 }
 static DEVICE_ATTR(power1_crit, S_IRUGO, show_power_crit, NULL);
 
+static void do_read_registers_on_cu(void *_data)
+{
+	struct fam15h_power_data *data = _data;
+	int cpu, cu;
+
+	cpu = smp_processor_id();
+
+	cu = cpu / smp_num_siblings;
+
+	rdmsrl_safe(MSR_F15H_CU_PWR_ACCUMULATOR, &data->cu_acc_power[cu]);
+}
+
+/*
+ * This function is only able to be called when CPUID
+ * Fn8000_0007:EDX[12] is set.
+ */
+static int read_registers(struct fam15h_power_data *data)
+{
+	int this_cpu, ret, cpu;
+	int target;
+	cpumask_var_t mask;
+
+	ret = zalloc_cpumask_var(&mask, GFP_KERNEL);
+	if (!ret)
+		return -ENOMEM;
+
+	get_online_cpus();
+	this_cpu = get_cpu();
+
+	/*
+	 * Choose the first online core of each compute unit, and then
+	 * read their MSR value of power and ptsc in a single IPI,
+	 * because the MSR value of CPU core represent the compute
+	 * unit's.
+	 */
+	for_each_online_cpu(cpu) {
+		target = cpumask_first(topology_sibling_cpumask(cpu));
+		if (!cpumask_test_cpu(target, mask))
+			cpumask_set_cpu(target, mask);
+	}
+
+	if (cpumask_test_cpu(this_cpu, mask))
+		do_read_registers_on_cu(data);
+
+	smp_call_function_many(mask, do_read_registers_on_cu, data, true);
+	put_cpu();
+	put_online_cpus();
+
+	free_cpumask_var(mask);
+
+	return 0;
+}
+
 static int fam15h_power_init_attrs(struct pci_dev *pdev,
 				   struct fam15h_power_data *data)
 {
@@ -263,7 +322,7 @@ static int fam15h_power_init_data(struct pci_dev *f4,
 
 	data->max_cu_acc_power = tmp;
 
-	return 0;
+	return read_registers(data);
 }
 
 static int fam15h_power_probe(struct pci_dev *pdev,
-- 
1.9.1


_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
