From: Alexey Orishko <alexey.orishko@gmail.com>
To: lm-sensors@vger.kernel.org
Subject: [lm-sensors] nct5573D missing fans
Date: Tue, 06 Oct 2015 10:43:00 +0000 [thread overview]
Message-ID: <CAL_Kpj0HDwHZ1bwQZXYWwV0-Acnoqjfe8hzZiGSzUkMBzcRD2A@mail.gmail.com> (raw)
Hi guys,
Asrock mobo C2550D4I has NCT5573D chip (at least they say in the mobo
manual) and here is sensors-detect output:
Found `Nuvoton NCT5577D/NCT6776F Super IO Sensors' Success!
(address 0x290, driver `nct6775')
Motherboard has 6 fan connectors cpu1&2, front 1&2 and rear 1&2, but if I
load nct6775 driver on ubuntu 14.04.3-64bit, I do see only fan1 and fan2
(and pwm1 and pwm2) and I have a trouble to control them (manual mode,
4-wire fan). If I use sensor monitoring in build-in BMC web interface, I
could at least see all 6 fans...
Is there anything that could be done in the config file or driver changes
are required to support this motherboard?
Regards,
Alexey
PS. do you have any info why lm-sensors.org is down?
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next reply other threads:[~2015-10-06 10:43 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-06 10:43 Alexey Orishko [this message]
2015-10-06 14:59 ` [lm-sensors] nct5573D missing fans Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAL_Kpj0HDwHZ1bwQZXYWwV0-Acnoqjfe8hzZiGSzUkMBzcRD2A@mail.gmail.com \
--to=alexey.orishko@gmail.com \
--cc=lm-sensors@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).