From: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <horms@kernel.org>, <saeedm@nvidia.com>,
<anthony.l.nguyen@intel.com>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <andrew@lunn.ch>,
<corbet@lwn.net>, <linux-doc@vger.kernel.org>,
<robh+dt@kernel.org>, <krzysztof.kozlowski+dt@linaro.org>,
<conor+dt@kernel.org>, <devicetree@vger.kernel.org>,
<horatiu.vultur@microchip.com>, <ruanjinjie@huawei.com>,
<steen.hegelund@microchip.com>, <vladimir.oltean@nxp.com>
Cc: <UNGLinuxDriver@microchip.com>,
<Thorsten.Kummermehr@microchip.com>, <Pier.Beruto@onsemi.com>,
<Selvamani.Rajagopal@onsemi.com>, <Nicolas.Ferre@microchip.com>,
<benjamin.bigler@bernformulastudent.ch>,
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
Subject: [PATCH net-next v4 06/12] net: ethernet: oa_tc6: implement internal PHY initialization
Date: Thu, 18 Apr 2024 18:26:42 +0530 [thread overview]
Message-ID: <20240418125648.372526-7-Parthiban.Veerasooran@microchip.com> (raw)
In-Reply-To: <20240418125648.372526-1-Parthiban.Veerasooran@microchip.com>
Internal PHY is initialized as per the PHY register capability supported
by the MAC-PHY. Direct PHY Register Access Capability indicates if PHY
registers are directly accessible within the SPI register memory space.
Indirect PHY Register Access Capability indicates if PHY registers are
indirectly accessible through the MDIO/MDC registers MDIOACCn defined in
OPEN Alliance specification. Currently the direct register access is only
supported.
Signed-off-by: Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com>
---
drivers/net/ethernet/oa_tc6.c | 230 +++++++++++++++++++++++++++++++-
drivers/net/phy/microchip_t1s.c | 30 +++++
include/linux/oa_tc6.h | 4 +-
include/uapi/linux/mdio.h | 1 +
4 files changed, 263 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/oa_tc6.c b/drivers/net/ethernet/oa_tc6.c
index 850765574d30..f04c4c13e8d3 100644
--- a/drivers/net/ethernet/oa_tc6.c
+++ b/drivers/net/ethernet/oa_tc6.c
@@ -7,9 +7,15 @@
#include <linux/bitfield.h>
#include <linux/iopoll.h>
+#include <linux/mdio.h>
+#include <linux/phy.h>
#include <linux/oa_tc6.h>
/* OPEN Alliance TC6 registers */
+/* Standard Capabilities Register */
+#define OA_TC6_REG_STDCAP 0x0002
+#define STDCAP_DIRECT_PHY_REG_ACCESS BIT(8)
+
/* Reset Control and Status Register */
#define OA_TC6_REG_RESET 0x0003
#define RESET_SWRESET BIT(0) /* Software Reset */
@@ -25,6 +31,10 @@
#define INT_MASK0_RX_BUFFER_OVERFLOW_ERR_MASK BIT(3)
#define INT_MASK0_TX_PROTOCOL_ERR_MASK BIT(0)
+/* PHY Clause 22 and 29 registers base address and mask */
+#define OA_TC6_PHY_STD_REG_ADDR_BASE 0xFF00
+#define OA_TC6_PHY_STD_REG_ADDR_MASK 0x3F
+
/* Control command header */
#define OA_TC6_CTRL_HEADER_DATA_NOT_CTRL BIT(31)
#define OA_TC6_CTRL_HEADER_WRITE_NOT_READ BIT(29)
@@ -33,6 +43,15 @@
#define OA_TC6_CTRL_HEADER_LENGTH GENMASK(7, 1)
#define OA_TC6_CTRL_HEADER_PARITY BIT(0)
+/* PHY – Clause 45 registers memory map selector (MMS) as per table 6 in the
+ * OPEN Alliance specification.
+ */
+#define OA_TC6_PHY_C45_PCS_MMS2 2 /* MMD 3 */
+#define OA_TC6_PHY_C45_PMA_PMD_MMS3 3 /* MMD 1 */
+#define OA_TC6_PHY_C45_VS_PLCA_MMS4 4 /* MMD 31 */
+#define OA_TC6_PHY_C45_AUTO_NEG_MMS5 5 /* MMD 7 */
+#define OA_TC6_PHY_C45_POWER_UNIT_MMS6 6 /* MMD 13 */
+
#define OA_TC6_CTRL_HEADER_SIZE 4
#define OA_TC6_CTRL_REG_VALUE_SIZE 4
#define OA_TC6_CTRL_IGNORED_SIZE 4
@@ -46,6 +65,10 @@
/* Internal structure for MAC-PHY drivers */
struct oa_tc6 {
+ struct device *dev;
+ struct net_device *netdev;
+ struct phy_device *phydev;
+ struct mii_bus *mdiobus;
struct spi_device *spi;
struct mutex spi_ctrl_lock; /* Protects spi control transfer */
void *spi_ctrl_tx_buf;
@@ -298,6 +321,191 @@ int oa_tc6_write_register(struct oa_tc6 *tc6, u32 address, u32 value)
}
EXPORT_SYMBOL_GPL(oa_tc6_write_register);
+static int oa_tc6_check_phy_reg_direct_access_capability(struct oa_tc6 *tc6)
+{
+ u32 regval;
+ int ret;
+
+ ret = oa_tc6_read_register(tc6, OA_TC6_REG_STDCAP, ®val);
+ if (ret)
+ return ret;
+
+ if (!(regval & STDCAP_DIRECT_PHY_REG_ACCESS))
+ return -ENODEV;
+
+ return 0;
+}
+
+static void oa_tc6_handle_link_change(struct net_device *netdev)
+{
+ phy_print_status(netdev->phydev);
+}
+
+static int oa_tc6_mdiobus_read(struct mii_bus *bus, int addr, int regnum)
+{
+ struct oa_tc6 *tc6 = bus->priv;
+ u32 regval;
+ bool ret;
+
+ ret = oa_tc6_read_register(tc6, OA_TC6_PHY_STD_REG_ADDR_BASE |
+ (regnum & OA_TC6_PHY_STD_REG_ADDR_MASK),
+ ®val);
+ if (ret)
+ return -ENODEV;
+
+ return regval;
+}
+
+static int oa_tc6_mdiobus_write(struct mii_bus *bus, int addr, int regnum,
+ u16 val)
+{
+ struct oa_tc6 *tc6 = bus->priv;
+
+ return oa_tc6_write_register(tc6, OA_TC6_PHY_STD_REG_ADDR_BASE |
+ (regnum & OA_TC6_PHY_STD_REG_ADDR_MASK),
+ val);
+}
+
+static int oa_tc6_get_phy_c45_mms(int devnum)
+{
+ switch (devnum) {
+ case MDIO_MMD_PCS:
+ return OA_TC6_PHY_C45_PCS_MMS2;
+ case MDIO_MMD_PMAPMD:
+ return OA_TC6_PHY_C45_PMA_PMD_MMS3;
+ case MDIO_MMD_VEND2:
+ return OA_TC6_PHY_C45_VS_PLCA_MMS4;
+ case MDIO_MMD_AN:
+ return OA_TC6_PHY_C45_AUTO_NEG_MMS5;
+ case MDIO_MMD_POWER_UNIT:
+ return OA_TC6_PHY_C45_POWER_UNIT_MMS6;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int oa_tc6_mdiobus_read_c45(struct mii_bus *bus, int addr, int devnum,
+ int regnum)
+{
+ struct oa_tc6 *tc6 = bus->priv;
+ u32 regval;
+ int ret;
+
+ ret = oa_tc6_get_phy_c45_mms(devnum);
+ if (ret < 0)
+ return ret;
+
+ ret = oa_tc6_read_register(tc6, (ret << 16) | regnum, ®val);
+ if (ret)
+ return ret;
+
+ return regval;
+}
+
+static int oa_tc6_mdiobus_write_c45(struct mii_bus *bus, int addr, int devnum,
+ int regnum, u16 val)
+{
+ struct oa_tc6 *tc6 = bus->priv;
+ int ret;
+
+ ret = oa_tc6_get_phy_c45_mms(devnum);
+ if (ret < 0)
+ return ret;
+
+ return oa_tc6_write_register(tc6, (ret << 16) | regnum, val);
+}
+
+static int oa_tc6_mdiobus_register(struct oa_tc6 *tc6)
+{
+ int ret;
+
+ tc6->mdiobus = mdiobus_alloc();
+ if (!tc6->mdiobus) {
+ netdev_err(tc6->netdev, "MDIO bus alloc failed\n");
+ return -ENOMEM;
+ }
+
+ tc6->mdiobus->priv = tc6;
+ tc6->mdiobus->read = oa_tc6_mdiobus_read;
+ tc6->mdiobus->write = oa_tc6_mdiobus_write;
+ /* OPEN Alliance 10BASE-T1x compliance MAC-PHYs will have both C22 and
+ * C45 registers space. If the PHY is discovered via C22 bus protocol it
+ * assumes it uses C22 protocol and always uses C22 registers indirect
+ * access to access C45 registers. This is because, we don't have a
+ * clean separation between C22/C45 register space and C22/C45 MDIO bus
+ * protocols. Resulting, PHY C45 registers direct access can't be used
+ * which can save multiple SPI bus access. To support this feature, PHY
+ * drivers can set .read_mmd/.write_mmd in the PHY driver to call
+ * .read_c45/.write_c45. Ex: drivers/net/phy/microchip_t1s.c
+ */
+ tc6->mdiobus->read_c45 = oa_tc6_mdiobus_read_c45;
+ tc6->mdiobus->write_c45 = oa_tc6_mdiobus_write_c45;
+ tc6->mdiobus->name = "oa-tc6-mdiobus";
+ tc6->mdiobus->parent = tc6->dev;
+
+ snprintf(tc6->mdiobus->id, ARRAY_SIZE(tc6->mdiobus->id), "%s",
+ dev_name(&tc6->spi->dev));
+
+ ret = mdiobus_register(tc6->mdiobus);
+ if (ret) {
+ netdev_err(tc6->netdev, "Could not register MDIO bus\n");
+ mdiobus_free(tc6->mdiobus);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void oa_tc6_mdiobus_unregister(struct oa_tc6 *tc6)
+{
+ mdiobus_unregister(tc6->mdiobus);
+ mdiobus_free(tc6->mdiobus);
+}
+
+static int oa_tc6_phy_init(struct oa_tc6 *tc6)
+{
+ int ret;
+
+ ret = oa_tc6_check_phy_reg_direct_access_capability(tc6);
+ if (ret) {
+ netdev_err(tc6->netdev,
+ "Direct PHY register access is not supported by the MAC-PHY\n");
+ return ret;
+ }
+
+ ret = oa_tc6_mdiobus_register(tc6);
+ if (ret)
+ return ret;
+
+ tc6->phydev = phy_find_first(tc6->mdiobus);
+ if (!tc6->phydev) {
+ netdev_err(tc6->netdev, "No PHY found\n");
+ oa_tc6_mdiobus_unregister(tc6);
+ return -ENODEV;
+ }
+
+ tc6->phydev->is_internal = true;
+ ret = phy_connect_direct(tc6->netdev, tc6->phydev,
+ &oa_tc6_handle_link_change,
+ PHY_INTERFACE_MODE_INTERNAL);
+ if (ret) {
+ netdev_err(tc6->netdev, "Can't attach PHY to %s\n",
+ tc6->mdiobus->id);
+ oa_tc6_mdiobus_unregister(tc6);
+ return ret;
+ }
+
+ phy_attached_info(tc6->netdev->phydev);
+
+ return 0;
+}
+
+static void oa_tc6_phy_exit(struct oa_tc6 *tc6)
+{
+ phy_disconnect(tc6->phydev);
+ oa_tc6_mdiobus_unregister(tc6);
+}
+
static int oa_tc6_read_status0(struct oa_tc6 *tc6)
{
u32 regval;
@@ -351,11 +559,12 @@ static int oa_tc6_unmask_macphy_error_interrupts(struct oa_tc6 *tc6)
/**
* oa_tc6_init - allocates and initializes oa_tc6 structure.
* @spi: device with which data will be exchanged.
+ * @netdev: network device interface structure.
*
* Returns pointer reference to the oa_tc6 structure if the MAC-PHY
* initialization is successful otherwise NULL.
*/
-struct oa_tc6 *oa_tc6_init(struct spi_device *spi)
+struct oa_tc6 *oa_tc6_init(struct spi_device *spi, struct net_device *netdev)
{
struct oa_tc6 *tc6;
int ret;
@@ -365,6 +574,8 @@ struct oa_tc6 *oa_tc6_init(struct spi_device *spi)
return NULL;
tc6->spi = spi;
+ tc6->netdev = netdev;
+ SET_NETDEV_DEV(netdev, &spi->dev);
mutex_init(&tc6->spi_ctrl_lock);
/* Set the SPI controller to pump at realtime priority */
@@ -395,10 +606,27 @@ struct oa_tc6 *oa_tc6_init(struct spi_device *spi)
return NULL;
}
+ ret = oa_tc6_phy_init(tc6);
+ if (ret) {
+ dev_err(&tc6->spi->dev,
+ "MAC internal PHY initialization failed: %d\n", ret);
+ return NULL;
+ }
+
return tc6;
}
EXPORT_SYMBOL_GPL(oa_tc6_init);
+/**
+ * oa_tc6_exit - exit function.
+ * @tc6: oa_tc6 struct.
+ */
+void oa_tc6_exit(struct oa_tc6 *tc6)
+{
+ oa_tc6_phy_exit(tc6);
+}
+EXPORT_SYMBOL_GPL(oa_tc6_exit);
+
MODULE_DESCRIPTION("OPEN Alliance 10BASE‑T1x MAC‑PHY Serial Interface Lib");
MODULE_AUTHOR("Parthiban Veerasooran <parthiban.veerasooran@microchip.com>");
MODULE_LICENSE("GPL");
diff --git a/drivers/net/phy/microchip_t1s.c b/drivers/net/phy/microchip_t1s.c
index 534ca7d1b061..769a88254285 100644
--- a/drivers/net/phy/microchip_t1s.c
+++ b/drivers/net/phy/microchip_t1s.c
@@ -268,6 +268,34 @@ static int lan86xx_read_status(struct phy_device *phydev)
return 0;
}
+/* OPEN Alliance 10BASE-T1x compliance MAC-PHYs will have both C22 and
+ * C45 registers space. If the PHY is discovered via C22 bus protocol it assumes
+ * it uses C22 protocol and always uses C22 registers indirect access to access
+ * C45 registers. This is because, we don't have a clean separation between
+ * C22/C45 register space and C22/C45 MDIO bus protocols. Resulting, PHY C45
+ * registers direct access can't be used which can save multiple SPI bus access.
+ * To support this feature, set .read_mmd/.write_mmd in the PHY driver to call
+ * .read_c45/.write_c45 in the OPEN Alliance framework
+ * drivers/net/ethernet/oa_tc6.c
+ */
+static int lan865x_phy_read_mmd(struct phy_device *phydev, int devnum,
+ u16 regnum)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int addr = phydev->mdio.addr;
+
+ return bus->read_c45(bus, addr, devnum, regnum);
+}
+
+static int lan865x_phy_write_mmd(struct phy_device *phydev, int devnum,
+ u16 regnum, u16 val)
+{
+ struct mii_bus *bus = phydev->mdio.bus;
+ int addr = phydev->mdio.addr;
+
+ return bus->write_c45(bus, addr, devnum, regnum, val);
+}
+
static struct phy_driver microchip_t1s_driver[] = {
{
PHY_ID_MATCH_EXACT(PHY_ID_LAN867X_REVB1),
@@ -285,6 +313,8 @@ static struct phy_driver microchip_t1s_driver[] = {
.features = PHY_BASIC_T1S_P2MP_FEATURES,
.config_init = lan865x_revb0_config_init,
.read_status = lan86xx_read_status,
+ .read_mmd = lan865x_phy_read_mmd,
+ .write_mmd = lan865x_phy_write_mmd,
.get_plca_cfg = genphy_c45_plca_get_cfg,
.set_plca_cfg = genphy_c45_plca_set_cfg,
.get_plca_status = genphy_c45_plca_get_status,
diff --git a/include/linux/oa_tc6.h b/include/linux/oa_tc6.h
index 85aeecf87306..606ba9f1e663 100644
--- a/include/linux/oa_tc6.h
+++ b/include/linux/oa_tc6.h
@@ -7,11 +7,13 @@
* Author: Parthiban Veerasooran <parthiban.veerasooran@microchip.com>
*/
+#include <linux/etherdevice.h>
#include <linux/spi/spi.h>
struct oa_tc6;
-struct oa_tc6 *oa_tc6_init(struct spi_device *spi);
+struct oa_tc6 *oa_tc6_init(struct spi_device *spi, struct net_device *netdev);
+void oa_tc6_exit(struct oa_tc6 *tc6);
int oa_tc6_write_register(struct oa_tc6 *tc6, u32 address, u32 value);
int oa_tc6_write_registers(struct oa_tc6 *tc6, u32 address, u32 value[],
u8 length);
diff --git a/include/uapi/linux/mdio.h b/include/uapi/linux/mdio.h
index c0c8ec995b06..f0d3f268240d 100644
--- a/include/uapi/linux/mdio.h
+++ b/include/uapi/linux/mdio.h
@@ -23,6 +23,7 @@
#define MDIO_MMD_DTEXS 5 /* DTE Extender Sublayer */
#define MDIO_MMD_TC 6 /* Transmission Convergence */
#define MDIO_MMD_AN 7 /* Auto-Negotiation */
+#define MDIO_MMD_POWER_UNIT 13 /* PHY Power Unit */
#define MDIO_MMD_C22EXT 29 /* Clause 22 extension */
#define MDIO_MMD_VEND1 30 /* Vendor specific 1 */
#define MDIO_MMD_VEND2 31 /* Vendor specific 2 */
--
2.34.1
next prev parent reply other threads:[~2024-04-18 12:57 UTC|newest]
Thread overview: 138+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-18 12:56 [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface Parthiban Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 01/12] Documentation: networking: add OPEN Alliance 10BASE-T1x MAC-PHY serial interface Parthiban Veerasooran
2024-04-28 9:33 ` Bagas Sanjaya
2024-04-29 11:31 ` Parthiban.Veerasooran
2024-04-29 16:17 ` Simon Horman
2024-04-30 11:30 ` Parthiban.Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 02/12] net: ethernet: oa_tc6: implement register write operation Parthiban Veerasooran
2024-04-22 23:48 ` Andrew Lunn
2024-04-23 4:38 ` Parthiban.Veerasooran
2024-04-23 23:14 ` Andrew Lunn
2024-04-26 5:55 ` Parthiban.Veerasooran
2024-04-29 16:36 ` Simon Horman
2024-04-30 8:14 ` Parthiban.Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 03/12] net: ethernet: oa_tc6: implement register read operation Parthiban Veerasooran
2024-04-23 23:17 ` Andrew Lunn
2024-04-26 5:56 ` Parthiban.Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 04/12] net: ethernet: oa_tc6: implement software reset Parthiban Veerasooran
2024-04-23 23:26 ` Andrew Lunn
2024-04-26 6:38 ` Parthiban.Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 05/12] net: ethernet: oa_tc6: implement error interrupts unmasking Parthiban Veerasooran
2024-04-23 23:27 ` Andrew Lunn
2024-04-27 19:52 ` Ramón Nordin Rodriguez
2024-04-27 21:17 ` Andrew Lunn
2024-04-27 21:55 ` Ramón Nordin Rodriguez
2024-04-28 14:48 ` Andrew Lunn
2024-04-28 9:54 ` Ramón Nordin Rodriguez
2024-04-28 14:59 ` Andrew Lunn
2024-04-28 22:04 ` Ramón Nordin Rodriguez
2024-05-01 18:29 ` Ramón Nordin Rodriguez
2024-05-01 19:58 ` Andrew Lunn
2024-05-01 20:07 ` Andrew Lunn
2024-05-02 10:10 ` Parthiban.Veerasooran
2024-05-02 10:19 ` Ramón Nordin Rodriguez
2024-05-03 7:10 ` Parthiban.Veerasooran
2024-05-06 1:21 ` Andrew Lunn
2024-05-06 6:47 ` Piergiorgio Beruto
2024-05-07 12:44 ` Ramón Nordin Rodriguez
2024-05-13 6:41 ` Ramón Nordin Rodriguez
2024-05-13 13:00 ` Andrew Lunn
2024-05-13 13:50 ` Ramón Nordin Rodriguez
2024-05-13 14:04 ` Andrew Lunn
2024-05-15 21:45 ` Ramón Nordin Rodriguez
2024-05-14 4:46 ` Parthiban.Veerasooran
2024-05-15 21:48 ` Ramón Nordin Rodriguez
2024-05-17 9:38 ` Parthiban.Veerasooran
2024-05-17 12:43 ` Ramón Nordin Rodriguez
2024-05-24 18:12 ` Ramón Nordin Rodriguez
2024-05-24 18:31 ` Andrew Lunn
2024-05-24 18:49 ` Piergiorgio Beruto
2024-05-27 9:30 ` Parthiban.Veerasooran
2024-05-27 8:38 ` Parthiban.Veerasooran
2024-04-18 12:56 ` Parthiban Veerasooran [this message]
2024-04-23 23:48 ` [PATCH net-next v4 06/12] net: ethernet: oa_tc6: implement internal PHY initialization Andrew Lunn
2024-04-26 13:17 ` Parthiban.Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 07/12] net: ethernet: oa_tc6: enable open alliance tc6 data communication Parthiban Veerasooran
2024-04-23 23:49 ` Andrew Lunn
2024-04-18 12:56 ` [PATCH net-next v4 08/12] net: ethernet: oa_tc6: implement transmit path to transfer tx ethernet frames Parthiban Veerasooran
2024-04-24 0:02 ` Andrew Lunn
2024-04-26 13:19 ` Parthiban.Veerasooran
2024-04-18 12:56 ` [PATCH net-next v4 09/12] net: ethernet: oa_tc6: implement receive path to receive rx " Parthiban Veerasooran
2024-04-24 0:08 ` Andrew Lunn
2024-04-26 13:45 ` Parthiban.Veerasooran
2024-04-26 18:13 ` Andrew Lunn
2024-04-29 6:13 ` Parthiban.Veerasooran
2024-04-27 20:02 ` Ramón Nordin Rodriguez
2024-04-29 8:32 ` Parthiban.Veerasooran
2024-04-29 10:45 ` Ramón Nordin Rodriguez
2024-04-18 12:56 ` [PATCH net-next v4 10/12] net: ethernet: oa_tc6: implement mac-phy interrupt Parthiban Veerasooran
2024-04-24 0:10 ` Andrew Lunn
2024-04-18 12:56 ` [PATCH net-next v4 11/12] microchip: lan865x: add driver support for Microchip's LAN865X MAC-PHY Parthiban Veerasooran
2024-04-24 0:27 ` Andrew Lunn
2024-04-26 13:32 ` Parthiban.Veerasooran
2024-04-26 18:14 ` Andrew Lunn
2024-04-29 6:13 ` Parthiban.Veerasooran
2024-04-27 19:19 ` Ramón Nordin Rodriguez
2024-04-27 19:57 ` Conor Dooley
2024-04-27 20:13 ` Ramón Nordin Rodriguez
2024-04-27 20:22 ` Conor Dooley
2024-04-27 21:09 ` Ramón Nordin Rodriguez
2024-04-29 9:47 ` Parthiban.Veerasooran
2024-04-29 12:09 ` Andrew Lunn
2024-04-30 13:30 ` Parthiban.Veerasooran
2024-04-30 16:55 ` Conor Dooley
2024-05-02 5:56 ` Parthiban.Veerasooran
2024-04-27 20:40 ` Andrew Lunn
2024-04-27 21:06 ` Ramón Nordin Rodriguez
2024-04-28 14:18 ` Andrew Lunn
2024-04-27 19:35 ` Ramón Nordin Rodriguez
2024-04-27 20:58 ` Andrew Lunn
2024-04-27 21:29 ` Ramón Nordin Rodriguez
2024-04-28 14:25 ` Andrew Lunn
2024-04-28 22:00 ` Ramón Nordin Rodriguez
2024-04-18 12:56 ` [PATCH net-next v4 12/12] dt-bindings: net: add Microchip's LAN865X 10BASE-T1S MACPHY Parthiban Veerasooran
2024-04-18 15:39 ` Conor Dooley
2024-04-22 3:59 ` Parthiban.Veerasooran
2024-04-22 15:50 ` Conor Dooley
2024-04-23 3:27 ` Parthiban.Veerasooran
2024-04-22 20:07 ` [PATCH net-next v4 00/12] Add support for OPEN Alliance 10BASE-T1x MACPHY Serial Interface Andrew Lunn
2024-04-22 20:08 ` Andrew Lunn
2024-04-22 23:23 ` Andrew Lunn
2024-05-08 13:05 ` Parthiban.Veerasooran
2024-05-08 17:04 ` Andrew Lunn
2024-05-09 13:04 ` Parthiban.Veerasooran
2024-05-09 20:39 ` Andrew Lunn
2024-05-10 11:22 ` Parthiban.Veerasooran
2024-05-24 20:52 ` Selvamani Rajagopal
2024-05-24 21:27 ` Andrew Lunn
2024-05-24 21:45 ` Piergiorgio Beruto
2024-05-24 21:54 ` Andrew Lunn
2024-05-24 22:08 ` Piergiorgio Beruto
2024-05-25 14:46 ` Andrew Lunn
2024-05-30 9:43 ` Piergiorgio Beruto
2024-05-30 13:06 ` Andrew Lunn
2024-05-30 21:37 ` Piergiorgio Beruto
2024-05-31 0:33 ` Andrew Lunn
2024-05-31 12:13 ` Parthiban.Veerasooran
2024-05-31 12:37 ` Andrew Lunn
2024-05-31 15:13 ` Piergiorgio Beruto
2024-06-03 6:55 ` Parthiban.Veerasooran
2024-06-05 21:40 ` Selvamani Rajagopal
2024-06-05 23:43 ` Andrew Lunn
2024-06-06 0:35 ` Selvamani Rajagopal
2024-06-06 13:12 ` Andrew Lunn
2024-06-07 4:40 ` Selvamani Rajagopal
2024-06-03 6:55 ` Parthiban.Veerasooran
2024-04-22 23:43 ` Andrew Lunn
2024-04-28 21:16 ` [PATCH net-next v4 13/12] net: lan865x: optional hardware reset Ramón Nordin Rodriguez
2024-04-28 23:17 ` Andrew Lunn
2024-04-29 10:42 ` Ramón Nordin Rodriguez
2024-04-29 6:09 ` Parthiban.Veerasooran
2024-04-29 10:38 ` Ramón Nordin Rodriguez
2024-04-29 12:19 ` Andrew Lunn
2024-04-30 8:04 ` Ramón Nordin Rodriguez
2024-04-30 13:30 ` Parthiban.Veerasooran
2024-04-30 14:14 ` Andrew Lunn
2024-05-02 10:10 ` Parthiban.Veerasooran
2024-04-29 6:09 ` Krzysztof Kozlowski
2024-04-29 10:44 ` Ramón Nordin Rodriguez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240418125648.372526-7-Parthiban.Veerasooran@microchip.com \
--to=parthiban.veerasooran@microchip.com \
--cc=Nicolas.Ferre@microchip.com \
--cc=Pier.Beruto@onsemi.com \
--cc=Selvamani.Rajagopal@onsemi.com \
--cc=Thorsten.Kummermehr@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=anthony.l.nguyen@intel.com \
--cc=benjamin.bigler@bernformulastudent.ch \
--cc=conor+dt@kernel.org \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=horatiu.vultur@microchip.com \
--cc=horms@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=robh+dt@kernel.org \
--cc=ruanjinjie@huawei.com \
--cc=saeedm@nvidia.com \
--cc=steen.hegelund@microchip.com \
--cc=vladimir.oltean@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).