From: Zev Weiss <zev@bewilderbeest.net>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@codeconstruct.com.au>
Cc: devicetree@vger.kernel.org, Zev Weiss <zev@bewilderbeest.net>,
linux-aspeed@lists.ozlabs.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMC
Date: Tue, 14 Nov 2023 03:28:22 -0800 [thread overview]
Message-ID: <20231114112819.28572-6-zev@bewilderbeest.net> (raw)
In-Reply-To: <20231114112819.28572-4-zev@bewilderbeest.net>
This is a Xeon board broadly similar (aside from CPU vendor) to the
already-support romed8hm3 (half-width, single-socket, ast2500). It
doesn't require anything terribly special for OpenBMC support, so this
device-tree should provide everything necessary for basic
functionality with it.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../aspeed/aspeed-bmc-asrock-spc621d8hm3.dts | 316 ++++++++++++++++++
2 files changed, 317 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e316d0..2df0a2e88df7 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
+ aspeed-bmc-asrock-spc621d8hm3.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
new file mode 100644
index 000000000000..95b440d90f56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-spc621d8hm3.dts
@@ -0,0 +1,316 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/{
+ model = "ASRock SPC621D8HM3 BMC";
+ compatible = "asrock,spc621d8hm3-bmc", "aspeed,ast2500";
+
+ aliases {
+ serial4 = &uart5;
+
+ i2c20 = &i2c1mux0ch0;
+ i2c21 = &i2c1mux0ch1;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ bootargs = "console=tty0 console=ttyS4,115200 earlycon";
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ heartbeat {
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "timer";
+ };
+
+ system-fault {
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
+ <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
+ };
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ m25p,fast-read;
+ label = "bmc";
+ spi-max-frequency = <50000000>; /* 50 MHz */
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+ aspeed,lpc-io-reg = <0x2f8>;
+ aspeed,lpc-interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mac0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ /* hardware monitor/thermal sensor */
+ temperature-sensor@29 {
+ compatible = "nuvoton,nct7802";
+ reg = <0x29>;
+ };
+
+ /* motherboard temp sensor (TMP1, near BMC) */
+ temperature-sensor@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+
+ /* motherboard FRU eeprom */
+ eeprom@50 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x50>;
+ pagesize = <16>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+ };
+
+ /* M.2 slot smbus mux */
+ i2c-mux@71 {
+ compatible = "nxp,pca9545";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c1mux0ch0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c1mux0ch1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c6 {
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+};
+
+&i2c9 {
+ status = "okay";
+};
+
+&i2c10 {
+ status = "okay";
+};
+
+&i2c11 {
+ status = "okay";
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+};
+
+&video {
+ status = "okay";
+};
+
+&vhub {
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&kcs3 {
+ status = "okay";
+ aspeed,lpc-io-reg = <0xca2>;
+};
+
+&peci0 {
+ status = "okay";
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default>;
+
+ fan@0 {
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@2 {
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
+ };
+
+ fan@4 {
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /* A */ "LOCATORLED_STATUS_N", "LOCATORBTN_N",
+ "BMC_READY_N", "FM_SPD_DDRCPU_LVLSHFT_EN",
+ "", "", "", "",
+ /* B */ "NODE_ID_1", "NODE_ID_2", "PSU_FAN_FAIL_N", "",
+ "", "", "", "GPIO_RST",
+ /* C */ "", "", "", "", "", "", "", "",
+ /* D */ "FP_PWR_BTN_MUX_N", "FM_BMC_PWRBTN_OUT_N",
+ "FP_RST_BTN_N", "RST_BMC_RSTBTN_OUT_N",
+ "NMI_BTN_N", "BMC_NMI",
+ "", "",
+ /* E */ "", "", "", "FM_ME_RCVR_N", "", "", "", "",
+ /* F */ "BMC_SMB_SEL_N", "FM_CPU2_DISABLE_COD_N",
+ "FM_REMOTE_DEBUG_BMC_EN", "FM_CPU_ERR0_LVT3_EN",
+ "FM_CPU_ERR1_LVT3_EN", "FM_CPU_ERR2_LVT3_EN",
+ "FM_MEM_THERM_EVENT_CPU1_LVT3_N", "FM_MEM_THERM_EVENT_CPU2_LVT3_N",
+ /* G */ "HWM_BAT_EN", "", "BMC_PHYRST_N", "FM_BIOS_SPI_BMC_CTRL",
+ "BMC_ALERT1_N", "BMC_ALERT2_N", "BMC_ALERT3_N", "IRQ_SML0_ALERT_N",
+ /* H */ "BMC_SMB_PRESENT_1_N", "FM_PCH_CORE_VID_0", "FM_PCH_CORE_VID_1", "",
+ "FM_MFG_MODE", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN",
+ /* I */ "IRQ_PVDDQ_ABCD_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_ABCD_CPU2_VRHOT_LVC3_N",
+ "IRQ_PVDDQ_EFGH_CPU1_VRHOT_LVC3_N", "IRQ_PVDDQ_EFGH_CPU2_VRHOT_LVC3_N",
+ "", "", "", "",
+ /* J */ "", "", "", "", "", "", "", "",
+ /* K */ "", "", "", "", "", "", "", "",
+ /* L */ "", "", "", "", "", "", "", "",
+ /* M */ "FM_PVCCIN_CPU1_PWR_IN_ALERT_N", "FM_PVCCIN_CPU2_PWR_IN_ALERT_N",
+ "IRQ_PVCCIN_CPU1_VRHOT_LVC3_N", "IRQ_PVCCIN_CPU2_VRHOT_LVC3_N",
+ "FM_CPU1_PROCHOT_BMC_LVC3_N", "",
+ "FM_CPU1_MEMHOT_OUT_N", "FM_CPU2_MEMHOT_OUT_N",
+ /* N */ "", "", "", "", "", "", "", "",
+ /* O */ "", "", "", "", "", "", "", "",
+ /* P */ "", "", "", "", "", "", "", "",
+ /* Q */ "", "", "", "", "", "", "RST_GLB_RST_WARN_N", "PCIE_WAKE_N",
+ /* R */ "", "", "FM_BMC_SUSACK_N", "FM_BMC_EUP_LOT6_N",
+ "", "FM_BMC_PCH_SCI_LPC_N", "", "",
+ /* S */ "FM_DBP_PRESENT_N", "FM_CPU2_SKTOCC_LCT3_N",
+ "FM_CPU1_FIVR_FAULT_LVT3", "FM_CPU2_FIVR_FAULT_LVT3",
+ "", "", "", "",
+ /* T */ "", "", "", "", "", "", "", "",
+ /* U */ "", "", "", "", "", "", "", "",
+ /* V */ "", "", "", "", "", "", "", "",
+ /* W */ "", "", "", "", "", "", "", "",
+ /* X */ "", "", "", "", "", "", "", "",
+ /* Y */ "FM_SLPS3_N", "FM_SLPS4_N", "", "FM_BMC_ONCTL_N_PLD",
+ "", "", "", "",
+ /* Z */ "FM_CPU_MSMI_CATERR_LVT3_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N",
+ "", "", "", "",
+ /* AA */ "FM_CPU1_THERMTRIP_LATCH_LVT3_N", "FM_CPU2_THERMTRIP_LATCH_LVT3_N",
+ "FM_BIOS_POST_COMPLT_N", "DBP_BMC_SYSPWROK",
+ "", "IRQ_SML0_ALERT_MUX_N",
+ "IRQ_SMI_ACTIVE_N", "IRQ_NMI_EVENT_N",
+ /* AB */ "FM_PCH_BMC_THERMTRIP_N", "PWRGD_SYS_PWROK",
+ "ME_OVERRIDE", "IRQ_BMC_PCH_SMI_LPC_N",
+ "", "", "", "",
+ /* AC */ "", "", "", "", "", "", "", "";
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */
+ &pinctrl_adc1_default /* 5VSB */
+ &pinctrl_adc2_default /* CPU1 */
+ &pinctrl_adc3_default /* NC */
+ &pinctrl_adc4_default /* VCCMABCD */
+ &pinctrl_adc5_default /* VCCMEFGH */
+ &pinctrl_adc6_default /* NC */
+ &pinctrl_adc7_default /* NC */
+ &pinctrl_adc8_default /* PVNN_PCH */
+ &pinctrl_adc9_default /* 1P05PCH */
+ &pinctrl_adc10_default /* 1P8PCH */
+ &pinctrl_adc11_default /* BAT */
+ &pinctrl_adc12_default /* 3V */
+ &pinctrl_adc13_default /* 5V */
+ &pinctrl_adc14_default /* 12V */
+ &pinctrl_adc15_default>; /* GND */
+};
--
2.42.0
prev parent reply other threads:[~2023-11-14 11:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-14 11:28 [PATCH 0/2] ARM: dts: aspeed: Add ASRock SPC621D8HM3 BMC Zev Weiss
2023-11-14 11:28 ` [PATCH 1/2] dt-bindings: arm: aspeed: document ASRock SPC621D8HM3 Zev Weiss
2023-11-14 11:28 ` Zev Weiss [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231114112819.28572-6-zev@bewilderbeest.net \
--to=zev@bewilderbeest.net \
--cc=andrew@codeconstruct.com.au \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).