From: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
To: patrick@stwcx.xyz, openbmc@lists.ozlabs.org, joel@jms.id.au
Cc: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Subject: [PATCH linux dev-6.6 v2 00/14] Add i2c-mux and eeprom devices for Meta Yosemite 4
Date: Mon, 11 Dec 2023 13:57:24 +0800 [thread overview]
Message-ID: <20231211055738.215773-1-Delphine_CC_Chiu@wiwynn.com> (raw)
Changelog:
- v2
- Correct patch for revising gpio name
- v1
- Add gpio and eeprom behind i2c-mux
- Remove redundant idle-state setting for i2c-mux
- Enable adc 15, wdt2,spi gpio for yosemite4 use
- Revise quad mode to dual mode to avoid WP pin influnece the SPI
- Revise power sensor adm1281 for yosemite4 schematic change
- Add gpio pca9506 I/O expander for yosemite4 use
- remove space for adm1272 compatible
- enable interrupt setting for pca9555
- add eeprom for yosemite4 medusa board/BSM use
- remove temperature sensor for yosemite4 schematic change
- add power sensor for power module reading
- Revise adc128d818 adc mode for yosemite4 schematic change
- Revise ina233 for yosemite4 schematic change
- Remove idle state setting for yosemite4 NIC connection
- Initialize bmc gpio state
- Revise mx31790 fan tach config
- Add mctp config for NIC
- Support mux to cpld
- Revise gpio name
Delphine CC Chiu (14):
ARM: dts: aspeed: yosemite4: Revise i2c-mux devices
ARM: dts: aspeed: yosemite4: Enable adc15
ARM: dts: aspeed: yosemite4: Enable spi-gpio setting
ARM: dts: aspeed: yosemite4: Enable watchdog2
ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode
ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic
change
ARM: dts: aspeed: yosemite4: Add gpio pca9506
ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change
ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 schematic change
ARM: dts: aspeed: yosemite4: Initialize bmc gpio state
ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config
ARM: dts: aspeed: yosemite4: add mctp config for NIC
ARM: dts: aspeed: yosemite4: support mux to cpld
ARM: dts: aspeed: yosemite4: Revise gpio name
.../aspeed/aspeed-bmc-facebook-yosemite4.dts | 1215 +++++++++++++++--
1 file changed, 1091 insertions(+), 124 deletions(-)
--
2.25.1
next reply other threads:[~2023-12-11 5:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-11 5:57 Delphine CC Chiu [this message]
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 01/14] ARM: dts: aspeed: yosemite4: Revise i2c-mux devices Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 02/14] ARM: dts: aspeed: yosemite4: Enable adc15 Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 03/14] ARM: dts: aspeed: yosemite4: Enable spi-gpio setting Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 04/14] ARM: dts: aspeed: yosemite4: Enable watchdog2 Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 05/14] ARM: dts: aspeed: yosemite4: Revise quad mode to dual mode Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 06/14] ARM: dts: aspeed: yosemite4: Revise power sensor adm1281 for schematic change Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 07/14] ARM: dts: aspeed: yosemite4: Add gpio pca9506 Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 08/14] ARM: dts: aspeed: yosemite4: Revise i2c11 and i2c12 schematic change Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 09/14] ARM: dts: aspeed: yosemite4: Revise i2c14 and i2c15 " Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 10/14] ARM: dts: aspeed: yosemite4: Initialize bmc gpio state Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 11/14] ARM: dts: aspeed: yosemite4: Revise mx31790 fan tach config Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 12/14] ARM: dts: aspeed: yosemite4: add mctp config for NIC Delphine CC Chiu
2023-12-11 5:57 ` [PATCH linux dev-6.6 v2 13/14] ARM: dts: aspeed: yosemite4: support mux to cpld Delphine CC Chiu
2023-12-11 5:57 ` [PATCH v2 linux dev-6.6 14/14] ARM: dts: aspeed: yosemite4: Revise gpio name Delphine CC Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231211055738.215773-1-Delphine_CC_Chiu@wiwynn.com \
--to=delphine_cc_chiu@wiwynn.com \
--cc=joel@jms.id.au \
--cc=openbmc@lists.ozlabs.org \
--cc=patrick@stwcx.xyz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).