From: ross.burton@arm.com
To: poky@lists.yoctoproject.org
Subject: [PATCH v3] Add genericarm64 MACHINE
Date: Wed, 28 Feb 2024 11:44:15 +0000 [thread overview]
Message-ID: <20240228114415.345202-1-ross.burton@arm.com> (raw)
From: Ross Burton <ross.burton@arm.com>
This is a new 64-bit "generic" Arm machine, that expects the hardware to
be SystemReady IR compatible.
Signed-off-by: Ross Burton <ross.burton@arm.com>
---
.../conf/templates/default/local.conf.sample | 1 +
meta-yocto-bsp/README.hardware.md | 18 +++++++++++-
meta-yocto-bsp/conf/machine/genericarm64.conf | 29 +++++++++++++++++++
.../linux/linux-yocto_6.6.bbappend | 5 ++++
meta-yocto-bsp/wic/genericarm64.wks.in | 11 +++++++
5 files changed, 63 insertions(+), 1 deletion(-)
create mode 100644 meta-yocto-bsp/conf/machine/genericarm64.conf
create mode 100644 meta-yocto-bsp/wic/genericarm64.wks.in
diff --git a/meta-poky/conf/templates/default/local.conf.sample b/meta-poky/conf/templates/default/local.conf.sample
index 5fb6944f3f0..1a93c9bdcf3 100644
--- a/meta-poky/conf/templates/default/local.conf.sample
+++ b/meta-poky/conf/templates/default/local.conf.sample
@@ -31,6 +31,7 @@
# demonstration purposes:
#
#MACHINE ?= "beaglebone-yocto"
+#MACHINE ?= "genericarm64"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#
diff --git a/meta-yocto-bsp/README.hardware.md b/meta-yocto-bsp/README.hardware.md
index a8f38cb21a6..bb8f57913fd 100644
--- a/meta-yocto-bsp/README.hardware.md
+++ b/meta-yocto-bsp/README.hardware.md
@@ -28,6 +28,7 @@ Hardware Reference Boards
The following boards are supported by the meta-yocto-bsp layer:
* Texas Instruments Beaglebone (beaglebone-yocto)
+ * General 64-bit Arm SystemReady platforms (genericarm64)
* General IA platforms (genericx86 and genericx86-64)
For more information see the board's section below. The appropriate MACHINE
@@ -55,7 +56,8 @@ Consumer Devices
The following consumer devices are supported by the meta-yocto-bsp layer:
- * Intel x86 based PCs and devices (genericx86)
+ * Arm-based SystemReady devices (genericarm64)
+ * Intel x86 based PCs and devices (genericx86 and genericx86-64)
For more information see the device's section below. The appropriate MACHINE
variable value corresponding to the device is given in brackets.
@@ -126,6 +128,20 @@ USB Device:
dd command to write the image to a USB stick.
+SystemReady Arm Platforms
+=========================
+
+The genericarm64 MACHINE is designed to work on standard SystemReady IR
+compliant boards with preinstalled firmware.
+
+The genericarm64 MACHINE is currently tested on the following platforms:
+
+ * Texas Instruments BeaglePlay
+
+The images built are EFI bootable disk images and can be written directly to a
+SD card for booting, for example.
+
+
Texas Instruments Beaglebone (beaglebone-yocto)
===============================================
diff --git a/meta-yocto-bsp/conf/machine/genericarm64.conf b/meta-yocto-bsp/conf/machine/genericarm64.conf
new file mode 100644
index 00000000000..83f1aca137a
--- /dev/null
+++ b/meta-yocto-bsp/conf/machine/genericarm64.conf
@@ -0,0 +1,29 @@
+#@TYPE: Machine
+#@NAME: genericarm64
+#@DESCRIPTION: Generic Arm64 machine for typical SystemReady platforms, which
+#have working firmware and boot via EFI.
+
+require conf/machine/include/arm/arch-armv8a.inc
+
+# Arm Base System Architecture says v8.0+ is allowed, but FEAT_CRC32 is required
+DEFAULTTUNE = "armv8a-crc"
+
+MACHINE_FEATURES = "acpi alsa bluetooth efi keyboard pci qemu-usermode rtc screen usbhost vfat wifi"
+
+# Install all the kernel modules and all the firmware
+MACHINE_EXTRA_RRECOMMENDS += "kernel-modules linux-firmware"
+
+KERNEL_IMAGETYPE = "Image"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto"
+
+# Use an initramfs and populate it with the kernel modules
+INITRAMFS_IMAGE ?= "core-image-initramfs-boot"
+PACKAGE_INSTALL:append:pn-core-image-initramfs-boot = " kernel-modules"
+
+IMAGE_FSTYPES ?= "wic"
+WKS_FILE ?= "genericarm64.wks.in"
+
+EFI_PROVIDER ?= "${@bb.utils.contains("DISTRO_FEATURES", "systemd", "systemd-boot", "grub-efi", d)}"
+
+# Try to bring up one physical serial console, or a virtualized serial console
+SERIAL_CONSOLES ?= "115200;ttyAMA0 115200;hvc0"
diff --git a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.6.bbappend b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.6.bbappend
index 8e465c241e8..ca7b2b09df7 100644
--- a/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.6.bbappend
+++ b/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_6.6.bbappend
@@ -1,19 +1,24 @@
+KBRANCH:genericarm64 = "v6.6/standard/base"
KBRANCH:genericx86 = "v6.6/standard/base"
KBRANCH:genericx86-64 = "v6.6/standard/base"
KBRANCH:beaglebone-yocto = "v6.6/standard/beaglebone"
+KMACHINE:genericarm64 ?= "genericarm64"
KMACHINE:genericx86 ?= "common-pc"
KMACHINE:genericx86-64 ?= "common-pc-64"
KMACHINE:beaglebone-yocto ?= "beaglebone"
+SRCREV_machine:genericarm64 ?= "e064a7d658a30b027b999183e21cd37305caff2a"
SRCREV_machine:genericx86 ?= "332d4668fcc32826907d4f3c4938845206006089"
SRCREV_machine:genericx86-64 ?= "332d4668fcc32826907d4f3c4938845206006089"
SRCREV_machine:beaglebone-yocto ?= "332d4668fcc32826907d4f3c4938845206006089"
+COMPATIBLE_MACHINE:genericarm64 = "genericarm64"
COMPATIBLE_MACHINE:genericx86 = "genericx86"
COMPATIBLE_MACHINE:genericx86-64 = "genericx86-64"
COMPATIBLE_MACHINE:beaglebone-yocto = "beaglebone-yocto"
+LINUX_VERSION:genericarm64 = "6.6.18"
LINUX_VERSION:genericx86 = "6.6.15"
LINUX_VERSION:genericx86-64 = "6.6.15"
LINUX_VERSION:beaglebone-yocto = "6.6.15"
diff --git a/meta-yocto-bsp/wic/genericarm64.wks.in b/meta-yocto-bsp/wic/genericarm64.wks.in
new file mode 100644
index 00000000000..417d4d88104
--- /dev/null
+++ b/meta-yocto-bsp/wic/genericarm64.wks.in
@@ -0,0 +1,11 @@
+# short-description: Create an EFI disk image
+# long-description: Creates a partitioned EFI disk image that the user
+# can directly dd to boot media.
+
+part /boot --source bootimg-efi --sourceparams="loader=${EFI_PROVIDER},initrd=${INITRAMFS_IMAGE}-${MACHINE}.${INITRAMFS_FSTYPES}" --label boot --active --align 1024 --use-uuid
+
+part / --source rootfs --fstype=ext4 --label root --align 1024 --use-uuid
+
+part swap --size 44 --label swap --fstype=swap --use-uuid
+
+bootloader --ptable gpt --timeout=5 --append="rootwait rootfstype=ext4"
--
2.34.1
next reply other threads:[~2024-02-28 11:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-28 11:44 ross.burton [this message]
2024-02-29 14:55 ` [PATCH v3] Add genericarm64 MACHINE Tom Rini
2024-02-29 15:29 ` Ross Burton
2024-02-29 15:31 ` Tom Rini
2024-02-29 15:37 ` Ross Burton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240228114415.345202-1-ross.burton@arm.com \
--to=ross.burton@arm.com \
--cc=poky@lists.yoctoproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).