$ git log --pretty=format:'%h %s (%cs)%d'
8dde059e9e77f6 s390/dma: Allow per device dma ops (2015-11-03)
(HEAD -> master)
1a062e17405953 alpha/dma: use common noop dma ops (2015-11-03)
0edc20a5801c3f dma: Provide simple noop dma ops (2015-11-03)
6a13feb9c82803 Linux 4.3 (2015-11-01)
95fc00a4e15e80 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm (2015-11-01)
ca04d396a3229d Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip (2015-11-01)
f5eab26701999b Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip (2015-11-01)
4bf690d7e09bba Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip (2015-11-01)
56ef9db24633cf Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc (2015-10-31)
060b85b0d30640 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi (2015-10-31)
...
$ git cat-file blob HEAD:README
Linux kernel release 4.x <http://kernel.org/>
These are the release notes for Linux version 4. Read them carefully,
as they tell you what this is all about, explain how to install the
kernel, and what to do if something goes wrong.
WHAT IS LINUX?
Linux is a clone of the operating system Unix, written from scratch by
Linus Torvalds with assistance from a loosely-knit team of hackers across
the Net. It aims towards POSIX and Single UNIX Specification compliance.
It has all the features you would expect in a modern fully-fledged Unix,
including true multitasking, virtual memory, shared libraries, demand
loading, shared copy-on-write executables, proper memory management,
and multistack networking including IPv4 and IPv6.
It is distributed under the GNU General Public License - see the
accompanying COPYING file for more details.
ON WHAT HARDWARE DOES IT RUN?
Although originally developed first for 32-bit x86-based PCs (386 or higher),
today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS,
Xtensa, Tilera TILE, AVR32 and Renesas M32R architectures.
Linux is easily portable to most general-purpose 32- or 64-bit architectures
as long as they have a paged memory management unit (PMMU) and a port of the
GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
also been ported to a number of architectures without a PMMU, although
functionality is then obviously somewhat limited.
Linux has also been ported to itself. You can now run the kernel as a
userspace application - this is called UserMode Linux (UML).
DOCUMENTATION:
- There is a lot of documentation available both in electronic form on
the Internet and in books, both Linux-specific and pertaining to
general UNIX questions. I'd recommend looking into the documentation
subdirectories on any Linux FTP site for the LDP (Linux Documentation
Project) books. This README is not meant to be documentation on the
system: there are much better sources available.
- There are various README files in the Documentation/ subdirectory:
these typically contain kernel-specific installation notes for some
drivers for example. See Documentation/00-INDEX for a list of what
is contained in each file. Please read the Changes file, as it
contains information about the problems, which may result by upgrading
your kernel.
- The Documentation/DocBook/ subdirectory contains several guides for
kernel developers and users. These guides can be rendered in a
number of formats: PostScript (.ps), PDF, HTML, & man-pages, among others.
After installation, "make psdocs", "make pdfdocs", "make htmldocs",
or "make mandocs" will render the documentation in the requested format.
INSTALLING the kernel source:
- If you install the full sources, put the kernel tarball in a
directory where you have permissions (eg. your home directory) and
unpack it:
xz -cd linux-4.X.tar.xz | tar xvf -
Replace "X" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually
incomplete) set of kernel headers that are used by the library header
files. They should match the library, and not get messed up by
whatever the kernel-du-jour happens to be.
- You can also upgrade between 4.x releases by patching. Patches are
distributed in the xz format. To install by patching, get all the
newer patch files, enter the top level directory of the kernel source
(linux-4.X) and execute:
xz -cd ../patch-4.x.xz | patch -p1
Replace "x" for all versions bigger than the version "X" of your current
source tree, _in_order_, and you should be ok. You may want to remove
the backup files (some-file-name~ or some-file-name.orig), and make sure
that there are no failed patches (some-file-name# or some-file-name.rej).
If there are, either you or I have made a mistake.
Unlike patches for the 4.x kernels, patches for the 4.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
directly to the base 4.x kernel. For example, if your base kernel is 4.0
and you want to apply the 4.0.3 patch, you must not first apply the 4.0.1
and 4.0.2 patches. Similarly, if you are running kernel version 4.0.2 and
want to jump to 4.0.3, you must first reverse the 4.0.2 patch (that is,
patch -R) _before_ applying the 4.0.3 patch. You can read more on this in
Documentation/applying-patches.txt
Alternatively, the script patch-kernel can be used to automate this
process. It determines the current kernel version and applies any
patches found.
linux/scripts/patch-kernel linux
The first argument in the command above is the location of the
kernel source. Patches are applied from the current directory, but
an alternative directory can be specified as the second argument.
- Make sure you have no stale .o files and dependencies lying around:
cd linux
make mrproper
You should now have the sources correctly installed.
SOFTWARE REQUIREMENTS
Compiling and running the 4.x kernels requires up-to-date
versions of various software packages. Consult
Documentation/Changes for the minimum version numbers required
and how to get updates for these packages. Beware that using
excessively old versions of these packages can cause indirect
errors that are very difficult to track down, so don't assume that
you can just update packages when obvious problems arise during
build or operation.
BUILD directory for the kernel:
When compiling the kernel, all output files will per default be
stored together with the kernel source code.
Using the option "make O=output/dir" allow you to specify an alternate
place for the output files (including .config).
Example:
kernel source code: /usr/src/linux-4.X
build directory: /home/name/build/kernel
To configure and build the kernel, use:
cd /usr/src/linux-4.X
make O=/home/name/build/kernel menuconfig
make O=/home/name/build/kernel
sudo make O=/home/name/build/kernel modules_install install
Please note: If the 'O=output/dir' option is used, then it must be
used for all invocations of make.
CONFIGURING the kernel:
Do not skip this step even if you are only upgrading one minor
version. New configuration options are added in each release, and
odd problems will turn up if the configuration files are not set up
as expected. If you want to carry your existing configuration to a
new version with minimal work, use "make oldconfig", which will
only ask you for the answers to new questions.
- Alternative configuration commands are:
"make config" Plain text interface.
"make menuconfig" Text based color menus, radiolists & dialogs.
"make nconfig" Enhanced text based color menus.
"make xconfig" X windows (Qt) based configuration tool.
"make gconfig" X windows (GTK+) based configuration tool.
"make oldconfig" Default all questions based on the contents of
your existing ./.config file and asking about
new config symbols.
"make silentoldconfig"
Like above, but avoids cluttering the screen
with questions already answered.
Additionally updates the dependencies.
"make olddefconfig"
Like above, but sets new symbols to their default
values without prompting.
"make defconfig" Create a ./.config file by using the default
symbol values from either arch/$ARCH/defconfig
or arch/$ARCH/configs/${PLATFORM}_defconfig,
depending on the architecture.
"make ${PLATFORM}_defconfig"
Create a ./.config file by using the default
symbol values from
arch/$ARCH/configs/${PLATFORM}_defconfig.
Use "make help" to get a list of all available
platforms of your architecture.
"make allyesconfig"
Create a ./.config file by setting symbol
values to 'y' as much as possible.
"make allmodconfig"
Create a ./.config file by setting symbol
values to 'm' as much as possible.
"make allnoconfig" Create a ./.config file by setting symbol
values to 'n' as much as possible.
"make randconfig" Create a ./.config file by setting symbol
values to random values.
"make localmodconfig" Create a config based on current config and
loaded modules (lsmod). Disables any module
option that is not needed for the loaded modules.
To create a localmodconfig for another machine,
store the lsmod of that machine into a file
and pass it in as a LSMOD parameter.
target$ lsmod > /tmp/mylsmod
target$ scp /tmp/mylsmod host:/tmp
host$ make LSMOD=/tmp/mylsmod localmodconfig
The above also works when cross compiling.
"make localyesconfig" Similar to localmodconfig, except it will convert
all module options to built in (=y) options.
You can find more information on using the Linux kernel config tools
in Documentation/kbuild/kconfig.txt.
- NOTES on "make config":
- Having unnecessary drivers will make the kernel bigger, and can
under some circumstances lead to problems: probing for a
nonexistent controller card may confuse your other controllers
- Compiling the kernel with "Processor type" set higher than 386
will result in a kernel that does NOT work on a 386. The
kernel will detect this on bootup, and give up.
- A kernel with math-emulation compiled in will still use the
coprocessor if one is present: the math emulation will just
never get used in that case. The kernel will be slightly larger,
but will work on different machines regardless of whether they
have a math coprocessor or not.
- The "kernel hacking" configuration details usually result in a
bigger or slower kernel (or both), and can even make the kernel
less stable by configuring some routines to actively try to
break bad code to find kernel problems (kmalloc()). Thus you
should probably answer 'n' to the questions for "development",
"experimental", or "debugging" features.
COMPILING the kernel:
- Make sure you have at least gcc 3.2 available.
For more information, refer to Documentation/Changes.
Please note that you can still run a.out user programs with this kernel.
- Do a "make" to create a compressed kernel image. It is also
possible to do "make install" if you have lilo installed to suit the
kernel makefiles, but you may want to check your particular lilo setup first.
To do the actual install, you have to be root, but none of the normal
build should require that. Don't take the name of root in vain.
- If you configured any of the parts of the kernel as `modules', you
will also have to do "make modules_install".
- Verbose kernel compile/build output:
Normally, the kernel build system runs in a fairly quiet mode (but not
totally silent). However, sometimes you or other kernel developers need
to see compile, link, or other commands exactly as they are executed.
For this, use "verbose" build mode. This is done by inserting
"V=1" in the "make" command. E.g.:
make V=1 all
To have the build system also tell the reason for the rebuild of each
target, use "V=2". The default is "V=0".
- Keep a backup kernel handy in case something goes wrong. This is
especially true for the development releases, since each new release
contains new code which has not been debugged. Make sure you keep a
backup of the modules corresponding to that kernel, as well. If you
are installing a new kernel with the same version number as your
working kernel, make a backup of your modules directory before you
do a "make modules_install".
Alternatively, before compiling, use the kernel config option
"LOCALVERSION" to append a unique suffix to the regular kernel version.
LOCALVERSION can be set in the "General Setup" menu.
- In order to boot your new kernel, you'll need to copy the kernel
image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
to the place where your regular bootable kernel is found.
- Booting a kernel directly from a floppy without the assistance of a
bootloader such as LILO, is no longer supported.
If you boot Linux from the hard drive, chances are you use LILO, which
uses the kernel image as specified in the file /etc/lilo.conf. The
kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
/boot/bzImage. To use the new kernel, save a copy of the old image
and copy the new image over the old one. Then, you MUST RERUN LILO
to update the loading map!! If you don't, you won't be able to boot
the new kernel image.
Reinstalling LILO is usually a matter of running /sbin/lilo.
You may wish to edit /etc/lilo.conf to specify an entry for your
old kernel image (say, /vmlinux.old) in case the new one does not
work. See the LILO docs for more information.
After reinstalling LILO, you should be all set. Shutdown the system,
reboot, and enjoy!
If you ever need to change the default root device, video mode,
ramdisk size, etc. in the kernel image, use the 'rdev' program (or
alternatively the LILO boot options when appropriate). No need to
recompile the kernel to change these parameters.
- Reboot with the new kernel and enjoy.
IF SOMETHING GOES WRONG:
- If you have problems that seem to be due to kernel bugs, please check
the file MAINTAINERS to see if there is a particular person associated
with the part of the kernel that you are having trouble with. If there
isn't anyone listed there, then the second best thing is to mail
them to me (torvalds@linux-foundation.org), and possibly to any other
relevant mailing-list or to the newsgroup.
- In all bug-reports, *please* tell what kernel you are talking about,
how to duplicate the problem, and what your setup is (use your common
sense). If the problem is new, tell me so, and if the problem is
old, please try to tell me when you first noticed it.
- If the bug results in a message like
unable to handle kernel paging request at address C0000010
Oops: 0002
EIP: 0010:XXXXXXXX
eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx
esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx
ds: xxxx es: xxxx fs: xxxx gs: xxxx
Pid: xx, process nr: xx
xx xx xx xx xx xx xx xx xx xx
or similar kernel debugging information on your screen or in your
system log, please duplicate it *exactly*. The dump may look
incomprehensible to you, but it does contain information that may
help debugging the problem. The text above the dump is also
important: it tells something about why the kernel dumped code (in
the above example, it's due to a bad kernel pointer). More information
on making sense of the dump is in Documentation/oops-tracing.txt
- If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
as is, otherwise you will have to use the "ksymoops" program to make
sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
This utility can be downloaded from
ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ .
Alternatively, you can do the dump lookup by hand:
- In debugging dumps like the above, it helps enormously if you can
look up what the EIP value means. The hex value as such doesn't help
me or anybody else very much: it will depend on your particular
kernel setup. What you should do is take the hex value from the EIP
line (ignore the "0010:"), and look it up in the kernel namelist to
see which kernel function contains the offending address.
To find out the kernel function name, you'll need to find the system
binary associated with the kernel that exhibited the symptom. This is
the file 'linux/vmlinux'. To extract the namelist and match it against
the EIP from the kernel crash, do:
nm vmlinux | sort | less
This will give you a list of kernel addresses sorted in ascending
order, from which it is simple to find the function that contains the
offending address. Note that the address given by the kernel
debugging messages will not necessarily match exactly with the
function addresses (in fact, that is very unlikely), so you can't
just 'grep' the list: the list will, however, give you the starting
point of each kernel function, so by looking for the function that
has a starting address lower than the one you are searching for but
is followed by a function with a higher address you will find the one
you want. In fact, it may be a good idea to include a bit of
"context" in your problem report, giving a few lines around the
interesting one.
If you for some reason cannot do the above (you have a pre-compiled
kernel image or similar), telling me as much about your setup as
possible will help. Please read the REPORTING-BUGS document for details.
- Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the
kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore".
You can now use all the usual gdb commands. The command to look up the
point where your system crashed is "l *0xXXXXXXXX". (Replace the XXXes
with the EIP value.)
gdb'ing a non-running kernel currently fails because gdb (wrongly)
disregards the starting offset for which the kernel is compiled.
# heads (aka `branches'):
$ git for-each-ref --sort=-creatordate refs/heads \
--format='%(HEAD) %(refname:short) %(subject) (%(creatordate:short))'
apbionic s390/zcrypt: Support up to 256 crypto adapters. (2018-11-02)
annotations KVM: use correct accessor function for __kvm_memslots (2017-07-10)
relax sched: provide common cpu_relax_yield definition (2016-11-16)
linux-next Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net (2016-11-14)
heads/cpurelax remove cpu_relax_lowlatency (2016-10-21)
dma s390/dma: Allow per device dma ops (2015-11-05)
* master s390/dma: Allow per device dma ops (2015-11-03)
ACCESS_ONCE kernel: Fix sparse warning for ACCESS_ONCE (2015-01-19)
# tags:
$ git for-each-ref --sort=-creatordate refs/tags \
--format='%(refname:short) %(subject) (%(creatordate:short))'
tags/cpurelax cpu_relax: drop lowlatency, introduce yield (2016-10-25) tar.gz
for-linus Tighten rules for ACCESS_ONCE (2015-02-09) tar.gz
for-linux kernel: Provide READ_ONCE and ASSIGN_ONCE (2014-12-18) tar.gz
access_once As discussed on LKML http://marc.info/?i=54611D86.4040306%40de.ibm.com ACCESS_ONCE might fail with specific compiler for non-scalar accesses. (2014-11-26) tar.gz
v3.18-rc6 Linux 3.18-rc6 (2014-11-23) tar.gz
v3.18-rc5 Linux 3.18-rc5 (2014-11-16) tar.gz
v3.18-rc4 Linux 3.18-rc4 (2014-11-09) tar.gz
v3.18-rc3 Linux 3.18-rc3 (2014-11-02) tar.gz
v3.18-rc2 Linux 3.18-rc2 (2014-10-26) tar.gz
v3.18-rc1 Linux 3.18-rc1 (2014-10-19) tar.gz
...
# associated public inboxes:
# (number on the left is used for dev purposes)
1278566 lkml
399357 stable
345218 netdev
257303 linux-arm-kernel
134220 linux-devicetree
113319 linux-wireless
103248 dri-devel
73350 linuxppc-dev
72773 linux-media
72725 alsa-devel
69666 linux-fsdevel
66645 linux-mm
61815 linux-patches
53149 intel-gfx
53013 kvm
51664 linux-scsi
49687 amd-gfx
42876 linux-omap
41248 linux-arm-msm
41092 linux-arch
39616 linux-mips
36046 linux-xfs
32143 linux-rdma
30748 linux-nfs
30706 linux-pm
29898 bpf
28543 linux-mediatek
28415 linux-doc
27989 linux-samsung-soc
27828 linux-crypto
26859 linux-acpi
26217 linux-block
26145 linux-s390
25772 netfilter-devel
23197 linux-mtd
22720 linux-renesas-soc
22530 linux-clk
22313 linux-sh
22309 linux-gpio
22285 linux-perf-users
21980 linux-pci
21642 linux-usb
21338 linux-iio
21263 linux-tegra
20191 linux-riscv
19328 kernel-janitors
18298 linux-input
18163 sparclinux
17786 linux-btrfs
16459 linux-kselftest
16229 kvmarm
16016 linux-ide
16012 linux-serial
15682 xen-devel
15486 linux-ext4
15387 linux-api
15034 linux-iommu
15004 linux-staging
14730 u-boot
14722 linux-mmc
14714 linux-fbdev
13996 driverdev-devel
13581 linux-rockchip
13397 linux-kbuild
13323 virtualization
13293 linux-cifs
12345 linux-bluetooth
12218 qemu-devel
12058 linux-spi
11851 linux-parisc
11345 linux-amlogic
11246 linux-i2c
11129 intel-wired-lan
10918 linux-security-module
10559 platform-driver-x86
10341 linux-ia64
10245 linux-f2fs-devel
9895 ceph-devel
9623 dm-devel
9564 linux-um
9059 linux-alpha
8912 linux-m68k
8118 linux-snps-arc
8038 linux-nvme
7977 cgroups
7549 nvdimm
7405 nouveau
7216 cluster-devel
7145 linux-sunxi
7058 linux-can
6765 linux-efi
6625 lustre-devel
6504 linux-watchdog
6496 containers
6421 linux-rtc
6387 batman
6213 intel-xe
6077 linux-raid
5960 kvm-ppc
5886 linux-hwmon
5751 linux-hexagon
5703 linux-sound
5621 openrisc
5527 linux-nvdimm
5513 loongarch
5474 linux-rt-users
5449 ocfs2-devel
5416 dmaengine
5377 rcu
5263 linux-hardening
5080 selinux
5072 linux-next
4988 linux-leds
4942 linux-integrity
4817 kernel-hardening
4758 io-uring
4718 linux-pwm
4703 linux-trace-kernel
4575 cip-dev
4406 linux-csky
4368 linux-sctp
4341 llvm
4307 outreachy
4142 bridge
4096 mptcp
4009 dpdk-dev
3978 git
3962 ath10k
3748 lm-sensors
3696 buildroot
3592 linux-remoteproc
3581 linux-hyperv
3454 kexec
3448 linux-wpan
3332 keyrings
3261 soc
3120 linux-phy
3065 linux-modules
3047 linux-nilfs
2986 linux-erofs
2906 linux-bcache
2904 target-devel
2903 linux-cxl
2779 ath11k
2749 linux-fscrypt
2295 ath9k-devel
2253 linux-edac
2238 lvs-devel
2111 openbmc
2099 linux-unionfs
2099 openembedded-core
2039 linux-hams
1947 linux-audit
1896 chrome-platform
1872 rust-for-linux
1691 phone-devel
1673 v9fs
1602 imx
1591 cpufreq
1572 asahi
1558 ath12k
1541 linux-fpga
1533 dccp
1481 linux-trace-devel
1469 openembedded-devel
1421 reiserfs-devel
1374 b43-dev
1366 linux-bcachefs
1258 historical-speck
1146 b4-sent
1135 ntfs3
1119 damon
1021 linux-kernel-mentees
1012 ntb
959 linux-metag
910 gfs2
904 linux-x25
892 fstests
888 ecryptfs
787 ltp
762 oe-kbuild-all
735 linux-sgx
735 linux-coco
715 linux-spdx
684 netfilter
679 igt-dev
675 live-patching
664 linux-man
661 netfs
640 lvm-devel
618 linux-ppp
616 linux-i3c
603 cocci
590 fsverity
547 qemu-riscv
544 autofs
537 tpmdd-devel
488 linux-oxnas
486 audit
477 yocto
450 linux-toolchains
435 regressions
434 oe-lkp
399 virtio-dev
386 linux-sparse
314 mhi
311 linux-nfc
311 oe-linux-nfc
303 acpica-devel
296 wireguard
289 u-boot-amlogic
262 lttng-dev
227 kernel-tls-handshake
221 grub-devel
213 bitbake-devel
212 yocto-meta-ti
211 mm-commits
202 workflows
198 backports
198 brcm80211
193 ofono
182 yocto-meta-arago
175 linux-aspeed
170 util-linux
169 kernel-testers
166 yocto-meta-freescale
164 fio
160 kvm-riscv
154 poky
151 xenomai
150 linux-embedded
149 xdp-newbies
149 kvm-ia64
148 linux-rt-devel
146 devicetree-compiler
140 kernelci
133 virtio-fs
130 xfs-stable
124 linux-kernel-announce
120 yocto-meta-arm
102 arm-scmi
100 iwd
99 trinity
90 linux-laptop
86 kernelnewbies
85 yocto-meta-virtualization
76 selinux-refpolicy
72 linux-hotplug
67 x86-cpuid
65 ksummit
64 ksummit-discuss
64 initramfs
62 yocto-docs
61 fuego
59 linux-firmware
59 perfbook
57 ell
57 yocto-toaster
52 linux-btrace
38 timestamp
37 stable-rt
33 virtio-comment
31 wireless-regdb
29 linux-console
28 devicetree-spec
27 powertop
25 linux-lvm
21 lkmm
20 linux-debuggers
20 barebox
19 connman
18 dash
17 linux-safety
16 linux-dash
16 ultralinux
14 oe-kbuild
14 kdevops
13 hail-devel
12 dwarves
12 spacemit
10 linux-trace-users
9 radiotap
9 kbd
8 smatch
7 sophgo
6 ccan
6 tech-board-discuss
6 yocto-patches
5 tools
5 linux-numa
5 accel-config
4 dm-crypt
4 linux-msdos
4 lartc
4 dtrace
3 stgt
3 linux-smp
2 linux-dwarves
2 oe-chipsec
2 linux-newbie
1 keys
1 signatures
1 linux-bugs
1 linux-config
1 linux-8086
1 mlmmj
1 spdk
1 criu
git clone https://yhbt.net/lore/pub/scm/linux/kernel/git/borntraeger/linux.git