$ git log --pretty=format:'%h %s (%cs)%d'
3587b1b097d70 fanotify: fix FAN_Q_OVERFLOW case of fanotify_read() (2012-11-18)
(HEAD -> master)
8d938105e432f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs (2012-11-18)
aa7202c25143e Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k (2012-11-18)
5ad27d6ca5d42 Merge tag 'gpio-fixes-for-v3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio (2012-11-18)
d28d3730fd377 Merge tag 'for-linus-v3.7-rc7' of git://oss.sgi.com/xfs/xfs (2012-11-18)
5e30c089e58dc Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev (2012-11-18)
34fa78b59c52d m68k: fix sigset_t accessor functions (2012-11-18)
cbf24fad8e6e9 gpio-mcp23s08: Build I2C support even when CONFIG_I2C=m (2012-11-17)
cb144fe8e0e70 gpio: adnp: Depend on OF_GPIO instead of OF (2012-11-17)
e91337609afdf mvebu-gpio: Disable blinking when enabling a GPIO for output (2012-11-17)
...
$ git cat-file blob HEAD:README
Linux kernel release 3.x <http://kernel.org/>
These are the release notes for Linux version 3. Read them carefully,
as they tell you what this is all about, explain how to install the
kernel, and what to do if something goes wrong.
WHAT IS LINUX?
Linux is a clone of the operating system Unix, written from scratch by
Linus Torvalds with assistance from a loosely-knit team of hackers across
the Net. It aims towards POSIX and Single UNIX Specification compliance.
It has all the features you would expect in a modern fully-fledged Unix,
including true multitasking, virtual memory, shared libraries, demand
loading, shared copy-on-write executables, proper memory management,
and multistack networking including IPv4 and IPv6.
It is distributed under the GNU General Public License - see the
accompanying COPYING file for more details.
ON WHAT HARDWARE DOES IT RUN?
Although originally developed first for 32-bit x86-based PCs (386 or higher),
today Linux also runs on (at least) the Compaq Alpha AXP, Sun SPARC and
UltraSPARC, Motorola 68000, PowerPC, PowerPC64, ARM, Hitachi SuperH, Cell,
IBM S/390, MIPS, HP PA-RISC, Intel IA-64, DEC VAX, AMD x86-64, AXIS CRIS,
Xtensa, Tilera TILE, AVR32 and Renesas M32R architectures.
Linux is easily portable to most general-purpose 32- or 64-bit architectures
as long as they have a paged memory management unit (PMMU) and a port of the
GNU C compiler (gcc) (part of The GNU Compiler Collection, GCC). Linux has
also been ported to a number of architectures without a PMMU, although
functionality is then obviously somewhat limited.
Linux has also been ported to itself. You can now run the kernel as a
userspace application - this is called UserMode Linux (UML).
DOCUMENTATION:
- There is a lot of documentation available both in electronic form on
the Internet and in books, both Linux-specific and pertaining to
general UNIX questions. I'd recommend looking into the documentation
subdirectories on any Linux FTP site for the LDP (Linux Documentation
Project) books. This README is not meant to be documentation on the
system: there are much better sources available.
- There are various README files in the Documentation/ subdirectory:
these typically contain kernel-specific installation notes for some
drivers for example. See Documentation/00-INDEX for a list of what
is contained in each file. Please read the Changes file, as it
contains information about the problems, which may result by upgrading
your kernel.
- The Documentation/DocBook/ subdirectory contains several guides for
kernel developers and users. These guides can be rendered in a
number of formats: PostScript (.ps), PDF, HTML, & man-pages, among others.
After installation, "make psdocs", "make pdfdocs", "make htmldocs",
or "make mandocs" will render the documentation in the requested format.
INSTALLING the kernel source:
- If you install the full sources, put the kernel tarball in a
directory where you have permissions (eg. your home directory) and
unpack it:
gzip -cd linux-3.X.tar.gz | tar xvf -
or
bzip2 -dc linux-3.X.tar.bz2 | tar xvf -
Replace "X" with the version number of the latest kernel.
Do NOT use the /usr/src/linux area! This area has a (usually
incomplete) set of kernel headers that are used by the library header
files. They should match the library, and not get messed up by
whatever the kernel-du-jour happens to be.
- You can also upgrade between 3.x releases by patching. Patches are
distributed in the traditional gzip and the newer bzip2 format. To
install by patching, get all the newer patch files, enter the
top level directory of the kernel source (linux-3.X) and execute:
gzip -cd ../patch-3.x.gz | patch -p1
or
bzip2 -dc ../patch-3.x.bz2 | patch -p1
Replace "x" for all versions bigger than the version "X" of your current
source tree, _in_order_, and you should be ok. You may want to remove
the backup files (some-file-name~ or some-file-name.orig), and make sure
that there are no failed patches (some-file-name# or some-file-name.rej).
If there are, either you or I have made a mistake.
Unlike patches for the 3.x kernels, patches for the 3.x.y kernels
(also known as the -stable kernels) are not incremental but instead apply
directly to the base 3.x kernel. For example, if your base kernel is 3.0
and you want to apply the 3.0.3 patch, you must not first apply the 3.0.1
and 3.0.2 patches. Similarly, if you are running kernel version 3.0.2 and
want to jump to 3.0.3, you must first reverse the 3.0.2 patch (that is,
patch -R) _before_ applying the 3.0.3 patch. You can read more on this in
Documentation/applying-patches.txt
Alternatively, the script patch-kernel can be used to automate this
process. It determines the current kernel version and applies any
patches found.
linux/scripts/patch-kernel linux
The first argument in the command above is the location of the
kernel source. Patches are applied from the current directory, but
an alternative directory can be specified as the second argument.
- Make sure you have no stale .o files and dependencies lying around:
cd linux
make mrproper
You should now have the sources correctly installed.
SOFTWARE REQUIREMENTS
Compiling and running the 3.x kernels requires up-to-date
versions of various software packages. Consult
Documentation/Changes for the minimum version numbers required
and how to get updates for these packages. Beware that using
excessively old versions of these packages can cause indirect
errors that are very difficult to track down, so don't assume that
you can just update packages when obvious problems arise during
build or operation.
BUILD directory for the kernel:
When compiling the kernel, all output files will per default be
stored together with the kernel source code.
Using the option "make O=output/dir" allow you to specify an alternate
place for the output files (including .config).
Example:
kernel source code: /usr/src/linux-3.X
build directory: /home/name/build/kernel
To configure and build the kernel, use:
cd /usr/src/linux-3.X
make O=/home/name/build/kernel menuconfig
make O=/home/name/build/kernel
sudo make O=/home/name/build/kernel modules_install install
Please note: If the 'O=output/dir' option is used, then it must be
used for all invocations of make.
CONFIGURING the kernel:
Do not skip this step even if you are only upgrading one minor
version. New configuration options are added in each release, and
odd problems will turn up if the configuration files are not set up
as expected. If you want to carry your existing configuration to a
new version with minimal work, use "make oldconfig", which will
only ask you for the answers to new questions.
- Alternative configuration commands are:
"make config" Plain text interface.
"make menuconfig" Text based color menus, radiolists & dialogs.
"make nconfig" Enhanced text based color menus.
"make xconfig" X windows (Qt) based configuration tool.
"make gconfig" X windows (Gtk) based configuration tool.
"make oldconfig" Default all questions based on the contents of
your existing ./.config file and asking about
new config symbols.
"make silentoldconfig"
Like above, but avoids cluttering the screen
with questions already answered.
Additionally updates the dependencies.
"make defconfig" Create a ./.config file by using the default
symbol values from either arch/$ARCH/defconfig
or arch/$ARCH/configs/${PLATFORM}_defconfig,
depending on the architecture.
"make ${PLATFORM}_defconfig"
Create a ./.config file by using the default
symbol values from
arch/$ARCH/configs/${PLATFORM}_defconfig.
Use "make help" to get a list of all available
platforms of your architecture.
"make allyesconfig"
Create a ./.config file by setting symbol
values to 'y' as much as possible.
"make allmodconfig"
Create a ./.config file by setting symbol
values to 'm' as much as possible.
"make allnoconfig" Create a ./.config file by setting symbol
values to 'n' as much as possible.
"make randconfig" Create a ./.config file by setting symbol
values to random values.
"make localmodconfig" Create a config based on current config and
loaded modules (lsmod). Disables any module
option that is not needed for the loaded modules.
To create a localmodconfig for another machine,
store the lsmod of that machine into a file
and pass it in as a LSMOD parameter.
target$ lsmod > /tmp/mylsmod
target$ scp /tmp/mylsmod host:/tmp
host$ make LSMOD=/tmp/mylsmod localmodconfig
The above also works when cross compiling.
"make localyesconfig" Similar to localmodconfig, except it will convert
all module options to built in (=y) options.
You can find more information on using the Linux kernel config tools
in Documentation/kbuild/kconfig.txt.
- NOTES on "make config":
- Having unnecessary drivers will make the kernel bigger, and can
under some circumstances lead to problems: probing for a
nonexistent controller card may confuse your other controllers
- Compiling the kernel with "Processor type" set higher than 386
will result in a kernel that does NOT work on a 386. The
kernel will detect this on bootup, and give up.
- A kernel with math-emulation compiled in will still use the
coprocessor if one is present: the math emulation will just
never get used in that case. The kernel will be slightly larger,
but will work on different machines regardless of whether they
have a math coprocessor or not.
- The "kernel hacking" configuration details usually result in a
bigger or slower kernel (or both), and can even make the kernel
less stable by configuring some routines to actively try to
break bad code to find kernel problems (kmalloc()). Thus you
should probably answer 'n' to the questions for "development",
"experimental", or "debugging" features.
COMPILING the kernel:
- Make sure you have at least gcc 3.2 available.
For more information, refer to Documentation/Changes.
Please note that you can still run a.out user programs with this kernel.
- Do a "make" to create a compressed kernel image. It is also
possible to do "make install" if you have lilo installed to suit the
kernel makefiles, but you may want to check your particular lilo setup first.
To do the actual install, you have to be root, but none of the normal
build should require that. Don't take the name of root in vain.
- If you configured any of the parts of the kernel as `modules', you
will also have to do "make modules_install".
- Verbose kernel compile/build output:
Normally, the kernel build system runs in a fairly quiet mode (but not
totally silent). However, sometimes you or other kernel developers need
to see compile, link, or other commands exactly as they are executed.
For this, use "verbose" build mode. This is done by inserting
"V=1" in the "make" command. E.g.:
make V=1 all
To have the build system also tell the reason for the rebuild of each
target, use "V=2". The default is "V=0".
- Keep a backup kernel handy in case something goes wrong. This is
especially true for the development releases, since each new release
contains new code which has not been debugged. Make sure you keep a
backup of the modules corresponding to that kernel, as well. If you
are installing a new kernel with the same version number as your
working kernel, make a backup of your modules directory before you
do a "make modules_install".
Alternatively, before compiling, use the kernel config option
"LOCALVERSION" to append a unique suffix to the regular kernel version.
LOCALVERSION can be set in the "General Setup" menu.
- In order to boot your new kernel, you'll need to copy the kernel
image (e.g. .../linux/arch/i386/boot/bzImage after compilation)
to the place where your regular bootable kernel is found.
- Booting a kernel directly from a floppy without the assistance of a
bootloader such as LILO, is no longer supported.
If you boot Linux from the hard drive, chances are you use LILO, which
uses the kernel image as specified in the file /etc/lilo.conf. The
kernel image file is usually /vmlinuz, /boot/vmlinuz, /bzImage or
/boot/bzImage. To use the new kernel, save a copy of the old image
and copy the new image over the old one. Then, you MUST RERUN LILO
to update the loading map!! If you don't, you won't be able to boot
the new kernel image.
Reinstalling LILO is usually a matter of running /sbin/lilo.
You may wish to edit /etc/lilo.conf to specify an entry for your
old kernel image (say, /vmlinux.old) in case the new one does not
work. See the LILO docs for more information.
After reinstalling LILO, you should be all set. Shutdown the system,
reboot, and enjoy!
If you ever need to change the default root device, video mode,
ramdisk size, etc. in the kernel image, use the 'rdev' program (or
alternatively the LILO boot options when appropriate). No need to
recompile the kernel to change these parameters.
- Reboot with the new kernel and enjoy.
IF SOMETHING GOES WRONG:
- If you have problems that seem to be due to kernel bugs, please check
the file MAINTAINERS to see if there is a particular person associated
with the part of the kernel that you are having trouble with. If there
isn't anyone listed there, then the second best thing is to mail
them to me (torvalds@linux-foundation.org), and possibly to any other
relevant mailing-list or to the newsgroup.
- In all bug-reports, *please* tell what kernel you are talking about,
how to duplicate the problem, and what your setup is (use your common
sense). If the problem is new, tell me so, and if the problem is
old, please try to tell me when you first noticed it.
- If the bug results in a message like
unable to handle kernel paging request at address C0000010
Oops: 0002
EIP: 0010:XXXXXXXX
eax: xxxxxxxx ebx: xxxxxxxx ecx: xxxxxxxx edx: xxxxxxxx
esi: xxxxxxxx edi: xxxxxxxx ebp: xxxxxxxx
ds: xxxx es: xxxx fs: xxxx gs: xxxx
Pid: xx, process nr: xx
xx xx xx xx xx xx xx xx xx xx
or similar kernel debugging information on your screen or in your
system log, please duplicate it *exactly*. The dump may look
incomprehensible to you, but it does contain information that may
help debugging the problem. The text above the dump is also
important: it tells something about why the kernel dumped code (in
the above example, it's due to a bad kernel pointer). More information
on making sense of the dump is in Documentation/oops-tracing.txt
- If you compiled the kernel with CONFIG_KALLSYMS you can send the dump
as is, otherwise you will have to use the "ksymoops" program to make
sense of the dump (but compiling with CONFIG_KALLSYMS is usually preferred).
This utility can be downloaded from
ftp://ftp.<country>.kernel.org/pub/linux/utils/kernel/ksymoops/ .
Alternatively, you can do the dump lookup by hand:
- In debugging dumps like the above, it helps enormously if you can
look up what the EIP value means. The hex value as such doesn't help
me or anybody else very much: it will depend on your particular
kernel setup. What you should do is take the hex value from the EIP
line (ignore the "0010:"), and look it up in the kernel namelist to
see which kernel function contains the offending address.
To find out the kernel function name, you'll need to find the system
binary associated with the kernel that exhibited the symptom. This is
the file 'linux/vmlinux'. To extract the namelist and match it against
the EIP from the kernel crash, do:
nm vmlinux | sort | less
This will give you a list of kernel addresses sorted in ascending
order, from which it is simple to find the function that contains the
offending address. Note that the address given by the kernel
debugging messages will not necessarily match exactly with the
function addresses (in fact, that is very unlikely), so you can't
just 'grep' the list: the list will, however, give you the starting
point of each kernel function, so by looking for the function that
has a starting address lower than the one you are searching for but
is followed by a function with a higher address you will find the one
you want. In fact, it may be a good idea to include a bit of
"context" in your problem report, giving a few lines around the
interesting one.
If you for some reason cannot do the above (you have a pre-compiled
kernel image or similar), telling me as much about your setup as
possible will help. Please read the REPORTING-BUGS document for details.
- Alternatively, you can use gdb on a running kernel. (read-only; i.e. you
cannot change values or set break points.) To do this, first compile the
kernel with -g; edit arch/i386/Makefile appropriately, then do a "make
clean". You'll also need to enable CONFIG_PROC_FS (via "make config").
After you've rebooted with the new kernel, do "gdb vmlinux /proc/kcore".
You can now use all the usual gdb commands. The command to look up the
point where your system crashed is "l *0xXXXXXXXX". (Replace the XXXes
with the EIP value.)
gdb'ing a non-running kernel currently fails because gdb (wrongly)
disregards the starting offset for which the kernel is compiled.
# heads (aka `branches'):
$ git for-each-ref --sort=-creatordate refs/heads \
--format='%(HEAD) %(refname:short) %(subject) (%(creatordate:short))'
io-uring-spawn WIP io_uring spawn (see commit message for status) (2024-05-29)
tiny/work Merge branch 'tiny/ksize' into tiny/next (2014-11-19)
tiny/ksize scripts/ksize: Add kernel build size report (2014-11-19)
tiny/no-ntp kernel: time: Compile out NTP support (2014-11-14)
tiny/unflex-array lib: Conditionally compile flex_array (2014-11-14)
tiny/no-rhashtable lib: rhashtable: Make rhashtable.c optional (2014-11-05)
tiny/no-obsolete-syscalls fs: Make obsolete syscalls optional (2014-11-05)
tiny/no-legacy-cpu-model-names arch: x86: Introduce new config for CPU legacy model names (2014-10-29)
tiny/no-halfmd4 lib: halfmd4: Make halfmd4.c optional (2014-10-29)
tiny/no-rtc-x86-cmos-systohc x86: rtc: Make writing time to RTC optional (2014-10-29)
...
# tags:
$ git for-each-ref --sort=-creatordate refs/tags \
--format='%(refname:short) %(subject) (%(creatordate:short))'
block-6.0-2022-09-16 block-6.0-2022-09-16 (2022-09-16) tar.gz
io_uring-6.0-2022-09-16 io_uring-6.0-2022-09-16 (2022-09-16) tar.gz
v6.0-rc5 Linux 6.0-rc5 (2022-09-11) tar.gz
block-6.0-2022-09-09 block-6.0-2022-09-09 (2022-09-09) tar.gz
io_uring-6.0-2022-09-09 io_uring-6.0-2022-09-09 (2022-09-09) tar.gz
v6.0-rc4 Linux 6.0-rc4 (2022-09-04) tar.gz
io_uring-6.0-2022-09-02 io_uring-6.0-2022-09-02 (2022-09-02) tar.gz
block-6.0-2022-09-02 block-6.0-2022-09-02 (2022-09-02) tar.gz
v6.0-rc3 Linux 6.0-rc3 (2022-08-28) tar.gz
x86-urgent-2022-08-28 Misc fixes: (2022-08-28) tar.gz
...
# associated public inboxes:
# (number on the left is used for dev purposes)
1368652 lkml
418110 stable
364496 netdev
275229 linux-arm-kernel
147777 linux-devicetree
118949 linux-wireless
113464 dri-devel
78563 linuxppc-dev
77890 linux-fsdevel
77587 linux-mm
76432 linux-media
72862 alsa-devel
71511 linux-patches
57818 intel-gfx
57317 kvm
53314 linux-scsi
53093 amd-gfx
47835 linux-arm-msm
43474 linux-omap
42805 linux-mips
42701 linux-arch
38820 linux-xfs
36883 linux-doc
35184 bpf
34865 linux-rdma
33215 linux-nfs
33204 linux-pm
33048 linux-crypto
31533 linux-mediatek
30685 linux-s390
29487 linux-samsung-soc
28915 linux-block
28094 linux-acpi
26663 netfilter-devel
26588 linux-riscv
26092 linux-perf-users
25768 linux-renesas-soc
24948 linux-gpio
24760 linux-clk
24705 linux-pci
24501 linux-mtd
23732 linux-usb
23153 linux-iio
23142 linux-sh
22768 linux-tegra
22313 linux-kselftest
20934 sparclinux
20353 linux-btrfs
19857 kernel-janitors
19602 linux-input
18288 kvmarm
17382 linux-ext4
17026 linux-staging
16806 linux-iommu
16657 linux-serial
16309 xen-devel
16270 linux-ide
16086 linux-api
15690 linux-rockchip
15561 linux-fbdev
15474 linux-mmc
15240 linux-cifs
14908 virtualization
14814 u-boot
14792 linux-kbuild
13996 driverdev-devel
13060 linux-bluetooth
13002 intel-xe
12957 linux-spi
12953 linux-security-module
12834 intel-wired-lan
12728 linux-parisc
12309 qemu-devel
12205 linux-amlogic
12039 platform-driver-x86
12037 linux-i2c
11590 linux-um
11306 linux-f2fs-devel
10890 linux-sound
10818 ceph-devel
10341 linux-ia64
10267 dm-devel
10138 linux-alpha
9738 linux-m68k
9061 cgroups
9058 linux-snps-arc
8788 linux-nvme
8747 nouveau
8562 nvdimm
8557 linux-sunxi
8154 loongarch
7870 linux-can
7686 linux-trace-kernel
7643 linux-efi
7216 cluster-devel
7066 linux-hwmon
6826 linux-rtc
6787 linux-hardening
6766 linux-raid
6736 linux-watchdog
6708 linux-hexagon
6625 lustre-devel
6496 containers
6423 batman
6394 cip-dev
6329 openrisc
6058 ocfs2-devel
6057 rcu
5972 kvm-ppc
5953 dmaengine
5952 selinux
5745 io-uring
5565 llvm
5527 linux-nvdimm
5504 linux-rt-users
5498 linux-integrity
5425 linux-csky
5397 imx
5205 linux-next
5203 linux-leds
5192 rust-for-linux
5174 linux-pwm
4817 kernel-hardening
4817 mptcp
4722 linux-sctp
4545 linux-hyperv
4389 linux-cxl
4312 outreachy
4232 bridge
4148 linux-remoteproc
4100 linux-phy
4047 ath10k
4034 dpdk-dev
3987 git
3905 kexec
3810 buildroot
3804 linux-modules
3780 keyrings
3748 lm-sensors
3682 linux-erofs
3593 linux-nilfs
3569 soc
3479 linux-wpan
3210 linux-fscrypt
3209 target-devel
3111 linux-unionfs
3021 linux-bcache
2933 ath11k
2871 linux-edac
2842 b4-sent
2693 ath12k
2469 openbmc
2439 asahi
2341 v9fs
2295 ath9k-devel
2287 chrome-platform
2274 lvs-devel
2270 linux-hams
2203 openembedded-core
2095 phone-devel
2012 damon
1979 ntfs3
1947 linux-audit
1825 linux-bcachefs
1690 linux-fpga
1602 linux-kernel-mentees
1591 cpufreq
1571 openembedded-devel
1533 dccp
1482 linux-trace-devel
1456 netfs
1454 gfs2
1448 ecryptfs
1421 reiserfs-devel
1414 linux-coco
1377 b43-dev
1258 historical-speck
1122 linux-x25
1090 linux-sgx
1037 live-patching
1034 ntb
1001 fsverity
959 linux-metag
908 fstests
880 oe-kbuild-all
858 linux-spdx
840 linux-i3c
809 ltp
781 linux-sparse
759 autofs
756 audit
718 sched-ext
699 igt-dev
684 netfilter
670 linux-aspeed
664 linux-man
640 cocci
640 lvm-devel
637 linux-ppp
590 linux-toolchains
548 qemu-riscv
537 tpmdd-devel
510 regressions
488 linux-oxnas
482 kvm-riscv
477 yocto
465 oe-lkp
421 virtio-dev
419 linux-rt-devel
417 spacemit
392 wireguard
392 sophgo
370 acpica-devel
354 mhi
344 kernel-tls-handshake
344 arm-scmi
339 workflows
311 linux-nfc
311 oe-linux-nfc
290 u-boot-amlogic
272 brcm80211
262 lttng-dev
224 yocto-meta-ti
224 grub-devel
219 bitbake-devel
218 mm-commits
212 yocto-meta-arago
202 xfs-stable
198 backports
194 ofono
171 util-linux
169 kernel-testers
166 yocto-meta-freescale
164 fio
158 xenomai
158 poky
150 linux-embedded
149 xdp-newbies
149 devicetree-compiler
149 kvm-ia64
140 kernelci
137 yocto-meta-arm
133 virtio-fs
131 op-tee
126 driver-core
125 x86-cpuid
124 linux-kernel-announce
100 iwd
99 trinity
96 lkmm
90 linux-laptop
89 yocto-meta-virtualization
86 kernelnewbies
81 yocto-docs
80 initramfs
76 selinux-refpolicy
76 linux-btrace
73 ksummit
72 linux-hotplug
64 ksummit-discuss
61 fuego
59 linux-firmware
59 perfbook
57 ell
57 yocto-toaster
41 stable-rt
39 dwarves
38 timestamp
38 barebox
34 virtio-comment
33 kdevops
33 yocto-patches
31 wireless-regdb
30 qemu-arm
29 linux-console
28 devicetree-spec
28 rpdfs-devel
27 linux-debuggers
27 powertop
25 linux-lvm
22 oe-kbuild
19 connman
18 dash
17 linux-safety
16 linux-dash
16 ultralinux
13 linux-trace-users
13 hail-devel
12 dtrace
11 mailbox
9 radiotap
9 kbd
9 smatch
8 tools
8 tech-board-discuss
8 opensbi
7 qemu-rust
6 ccan
5 keys
5 linux-newbie
5 linux-numa
5 accel-config
5 criu
4 dm-crypt
4 linux-msdos
4 lartc
3 stgt
3 linux-smp
3 tpm2
2 linux-dwarves
2 oe-chipsec
2 syzbot
1 signatures
1 linux-bugs
1 cti-tac
1 linux-config
1 linux-8086
1 mlmmj
1 spdk
git clone https://yhbt.net/lore/pub/scm/linux/kernel/git/josh/linux.git