# heads (aka `branches'): $ git for-each-ref --sort=-creatordate refs/heads \ --format='%(HEAD) %(refname:short) %(subject) (%(creatordate:short))' for-usb-next xhci: Transition maintainership to Mathias Nyman. (2014-03-21) for-usb-next-3.14-streams dual scan thread bug fix (2014-03-06) for-usb-linus usb: option: blacklist ZTE MF667 net interface (2014-02-11) 3.13-td-changes-reverted Revert "usb: xhci: Link TRB must not occur within a USB payload burst" (2014-01-31) for-usb-linus-td-fragment-revert Revert "usb: xhci: Link TRB must not occur within a USB payload burst" (2014-01-31) for-usb-linus-3.14 Revert "xhci: replace xhci_write_64() with writeq()" (2014-01-29) for-usb-next-command-queue xhci: rework command timeout and cancellation, (2014-01-27) for-usb-linus-limit-no-ops xhci: Limit TD fragments to 1.0 xHCI hosts only. (2014-01-27) for-usb-linus-seagate-lpm usb: Disable Link PM if setting device-initiated timeout fails. (2014-01-22) for-usb-next-3.14 xhci: make warnings greppable (2014-01-22) fun-port-poweroff usb: make khubd and subsequent suspension wait for port recovery (2014-01-13) 3.12-td-fragment-failure More debugging. (2014-01-07) for-usb-next-streams Test James Bottomley's fix. (2013-12-13) fun-streams-fixes usbfs: Add support for allocating / freeing streams (2013-10-16) fun-2013-10-01-address-device usb: xhci: support 'new_scheme' device probing (2013-10-01) fun-usb3-port-power-off USB: Add documentation for USB port power off mechanism. (2013-10-01) ful-port-poweroff-fixes-2 xhci-plat: Don't enable legacy PCI interrupts. (2013-08-09) ful-xhci-plat-fix xhci-plat: Don't enable legacy PCI interrupts. (2013-08-08) ful-port-poweroff-fixes usb: Don't fail port power resume on device disconnect. (2013-08-05) fun-klockwork xhci: remove BUG() in xhci_get_endpoint_type() (2013-06-14) opw-kernel Staging: silicom: Fixed warning 'preferred seq_puts instead of seq_printf'. (2013-05-20) ful-ti-comp xhci: Disable D3cold for buggy TI redrivers. (2013-05-09) 3.4-stable USB: Fix connected device switch to Inactive state. (2013-03-11) warm-reset-next-3 USB: Refactor hub_port_wait_reset. (2012-12-11) warm-reset-next-2 USB: Fix connected device switch to Inactive state. (2012-12-04) warm-reset-next USB: Fix connected device switch to Inactive state. (2012-11-21) warm-reset-stable USB: Handle warm reset failure on empty port. (2012-11-15) set-addr-issue USB: Fix dropping endpoints when SetConfig fails. (2012-10-26) for-usb-linus-pending usb: trival: Fix debugging units mistake. (2012-10-08) 3.5-plus-set-addr xHCI: handle command after aborting the command ring (2012-09-13) for-usb-linus-plus-set-addr xHCI: handle command after aborting the command ring (2012-09-05) for-usb-linus-3.6 xhci: Fix bug after deq ptr set to link TRB. (2012-08-07) for-usb-next-set-addr xHCI: cancel command after command timeout (2012-07-23) for-usb-next-port-power-off usb : Add sysfs files to control port power. (2012-07-17) cancel-command-fix xHCI: cancel command queued in the command ring (2012-06-12) 3.0-stable-patches xhci: Avoid dead ports when CONFIG_USB_XHCI_HCD=n (2012-06-07) for-usb-next-bulk-cont xhci: Let completion handlers run before rings are restarted. (2012-06-04) speed-warn USB: Warn about USB3 devices plugged into USB2 hub. (2012-02-21) 3.1-stable-patches USB: Try MSI first before line IRQ for Intel PCIe USB3 HCD (2012-02-03) for-uas-next usb/uas: make sure data urb is gone if we receive status before that (2012-02-02) andiry-ring-expansion Trival: xHCI: Fix typo in babbling comment. (2012-01-28) uas UAS: Embed srcu structure in uas_dev_info. (2011-12-08) stable-3.1 xHCI: Clear PLC for USB2 root hub ports (2011-11-04) * master Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/hch/vfs-queue (2011-11-02)
git clone https://yhbt.net/pub/scm/linux/kernel/git/sagesharp/xhci.git