From: Andrew Morton <akpm@linux-foundation.org>
To: mm-commits@vger.kernel.org,usama.anjum@collabora.com,stable@vger.kernel.org,peterx@redhat.com,david@redhat.com,ryan.roberts@arm.com,akpm@linux-foundation.org
Subject: [merged mm-hotfixes-stable] fs-proc-task_mmu-fix-uffd-wp-confusion-in-pagemap_scan_pmd_entry.patch removed from -mm tree
Date: Sun, 05 May 2024 17:28:52 -0700 [thread overview]
Message-ID: <20240506002852.AFE56C113CC@smtp.kernel.org> (raw)
The quilt patch titled
Subject: fs/proc/task_mmu: fix uffd-wp confusion in pagemap_scan_pmd_entry()
has been removed from the -mm tree. Its filename was
fs-proc-task_mmu-fix-uffd-wp-confusion-in-pagemap_scan_pmd_entry.patch
This patch was dropped because it was merged into the mm-hotfixes-stable branch
of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
------------------------------------------------------
From: Ryan Roberts <ryan.roberts@arm.com>
Subject: fs/proc/task_mmu: fix uffd-wp confusion in pagemap_scan_pmd_entry()
Date: Mon, 29 Apr 2024 12:41:04 +0100
pagemap_scan_pmd_entry() checks if uffd-wp is set on each pte to avoid
unnecessary if set. However it was previously checking with
`pte_uffd_wp(ptep_get(pte))` without first confirming that the pte was
present. It is only valid to call pte_uffd_wp() for present ptes. For
swap ptes, pte_swp_uffd_wp() must be called because the uffd-wp bit may be
kept in a different position, depending on the arch.
This was leading to test failures in the pagemap_ioctl mm selftest, when
bringing up uffd-wp support on arm64 due to incorrectly interpretting the
uffd-wp status of migration entries.
Let's fix this by using the correct check based on pte_present(). While
we are at it, let's pass the pte to make_uffd_wp_pte() to avoid the
pointless extra ptep_get() which can't be optimized out due to READ_ONCE()
on many arches.
Link: https://lkml.kernel.org/r/20240429114104.182890-1-ryan.roberts@arm.com
Fixes: 12f6b01a0bcb ("fs/proc/task_mmu: add fast paths to get/clear PAGE_IS_WRITTEN flag")
Closes: https://lore.kernel.org/linux-arm-kernel/ZiuyGXt0XWwRgFh9@x1n/
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
fs/proc/task_mmu.c | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
--- a/fs/proc/task_mmu.c~fs-proc-task_mmu-fix-uffd-wp-confusion-in-pagemap_scan_pmd_entry
+++ a/fs/proc/task_mmu.c
@@ -1817,10 +1817,8 @@ static unsigned long pagemap_page_catego
}
static void make_uffd_wp_pte(struct vm_area_struct *vma,
- unsigned long addr, pte_t *pte)
+ unsigned long addr, pte_t *pte, pte_t ptent)
{
- pte_t ptent = ptep_get(pte);
-
if (pte_present(ptent)) {
pte_t old_pte;
@@ -2175,9 +2173,12 @@ static int pagemap_scan_pmd_entry(pmd_t
if ((p->arg.flags & PM_SCAN_WP_MATCHING) && !p->vec_out) {
/* Fast path for performing exclusive WP */
for (addr = start; addr != end; pte++, addr += PAGE_SIZE) {
- if (pte_uffd_wp(ptep_get(pte)))
+ pte_t ptent = ptep_get(pte);
+
+ if ((pte_present(ptent) && pte_uffd_wp(ptent)) ||
+ pte_swp_uffd_wp_any(ptent))
continue;
- make_uffd_wp_pte(vma, addr, pte);
+ make_uffd_wp_pte(vma, addr, pte, ptent);
if (!flush_end)
start = addr;
flush_end = addr + PAGE_SIZE;
@@ -2190,8 +2191,10 @@ static int pagemap_scan_pmd_entry(pmd_t
p->arg.return_mask == PAGE_IS_WRITTEN) {
for (addr = start; addr < end; pte++, addr += PAGE_SIZE) {
unsigned long next = addr + PAGE_SIZE;
+ pte_t ptent = ptep_get(pte);
- if (pte_uffd_wp(ptep_get(pte)))
+ if ((pte_present(ptent) && pte_uffd_wp(ptent)) ||
+ pte_swp_uffd_wp_any(ptent))
continue;
ret = pagemap_scan_output(p->cur_vma_category | PAGE_IS_WRITTEN,
p, addr, &next);
@@ -2199,7 +2202,7 @@ static int pagemap_scan_pmd_entry(pmd_t
break;
if (~p->arg.flags & PM_SCAN_WP_MATCHING)
continue;
- make_uffd_wp_pte(vma, addr, pte);
+ make_uffd_wp_pte(vma, addr, pte, ptent);
if (!flush_end)
start = addr;
flush_end = next;
@@ -2208,8 +2211,9 @@ static int pagemap_scan_pmd_entry(pmd_t
}
for (addr = start; addr != end; pte++, addr += PAGE_SIZE) {
+ pte_t ptent = ptep_get(pte);
unsigned long categories = p->cur_vma_category |
- pagemap_page_category(p, vma, addr, ptep_get(pte));
+ pagemap_page_category(p, vma, addr, ptent);
unsigned long next = addr + PAGE_SIZE;
if (!pagemap_scan_is_interesting_page(categories, p))
@@ -2224,7 +2228,7 @@ static int pagemap_scan_pmd_entry(pmd_t
if (~categories & PAGE_IS_WRITTEN)
continue;
- make_uffd_wp_pte(vma, addr, pte);
+ make_uffd_wp_pte(vma, addr, pte, ptent);
if (!flush_end)
start = addr;
flush_end = next;
_
Patches currently in -mm which might be from ryan.roberts@arm.com are
selftests-mm-soft-dirty-should-fail-if-a-testcase-fails.patch
mm-debug_vm_pgtable-test-pmd_leaf-behavior-with-pmd_mkinvalid.patch
mm-fix-race-between-__split_huge_pmd_locked-and-gup-fast.patch
reply other threads:[~2024-05-06 0:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240506002852.AFE56C113CC@smtp.kernel.org \
--to=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=mm-commits@vger.kernel.org \
--cc=peterx@redhat.com \
--cc=ryan.roberts@arm.com \
--cc=stable@vger.kernel.org \
--cc=usama.anjum@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).