* Re: [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for, UCLASS_PARTITION devices
2022-06-29 1:02 [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for, UCLASS_PARTITION devices Paul Barbieri
@ 2022-06-29 4:43 ` AKASHI Takahiro
2022-06-29 4:58 ` Heinrich Schuchardt
2022-06-29 17:44 ` [PATCH v2] EFI: Fix ReadBlocks API reading incorrect sector for " Paul Barbieri
2 siblings, 0 replies; 8+ messages in thread
From: AKASHI Takahiro @ 2022-06-29 4:43 UTC (permalink / raw
To: Paul Barbieri; +Cc: u-boot, xypron.glpk
Hi Paul,
On Tue, Jun 28, 2022 at 09:02:47PM -0400, Paul Barbieri wrote:
> From 7a7dd7f16352fc916279cca05a3fa617f8bbef64 Mon Sep 17 00:00:00 2001
> From: Paul Barbieri <plb365@gmail.com>
> Date: Tue, 28 Jun 2022 20:24:33 -0400
> Subject: [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for
> UCLASS_PARTITION devices
>
> The requested partition disk sector incorrectly has the partition start
> sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
> routine adds the diskobj->offset to the requested lba. When the device
> is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
> which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
>
> Takahiro Akashi suggested removing the offset field from the efi_disk_obj
> structure since disk-uclass.c handles the partition start biasing. Device
> types other than UCLASS_PARTITION set the diskobj->offset field to zero
> which makes the field unnecessary. This change removes the offset field
> from the structure and removes all references from the code which is
> isolated to the lib/efi_loader/efi_disk.c module.
Your change on efi_disk.c looks good, but
> This change also adds a test for the EFI ReadBlocks() API in the EFI
> selftest code. There is already a test for reading a FAT file. The new
> test uses ReadBlocks() to read the same "disk" block and compare it to
> the data read from the file system API.
Your test will never exercise the code you added in efi_disk.c
(or efi_disk_rw_blocks()) because "block device" selftest uses
its own block device driver.
-Takahiro Akashi
> Signed-Off-by: Paul Barbieri <paul.barbieri@verizon.net>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
> lib/efi_loader/efi_disk.c | 8 +-------
> lib/efi_selftest/efi_selftest_block_device.c | 19 +++++++++++++++++++
> 2 files changed, 20 insertions(+), 7 deletions(-)
>
> diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
> index 1e82f52dc0..1d700b2a6b 100644
> --- a/lib/efi_loader/efi_disk.c
> +++ b/lib/efi_loader/efi_disk.c
> @@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid =
> PARTITION_SYSTEM_GUID;
> * @dp: device path to the block device
> * @part: partition
> * @volume: simple file system protocol of the partition
> - * @offset: offset into disk for simple partition
> * @dev: associated DM device
> */
> struct efi_disk_obj {
> @@ -47,7 +46,6 @@ struct efi_disk_obj {
> struct efi_device_path *dp;
> unsigned int part;
> struct efi_simple_file_system_protocol *volume;
> - lbaint_t offset;
> struct udevice *dev; /* TODO: move it to efi_object */
> };
>
> @@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct
> efi_block_io *this,
> diskobj = container_of(this, struct efi_disk_obj, ops);
> blksz = diskobj->media.block_size;
> blocks = buffer_size / blksz;
> - lba += diskobj->offset;
>
> EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
> blocks, lba, blksz, direction);
> @@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
>
> diskobj->dp = efi_dp_append_node(dp_parent, node);
> efi_free_pool(node);
> - diskobj->offset = part_info->start;
> diskobj->media.last_block = part_info->size - 1;
> if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
> guid = &efi_system_partition_guid;
> } else {
> diskobj->dp = efi_dp_from_part(desc, part);
> - diskobj->offset = 0;
> diskobj->media.last_block = desc->lba - 1;
> }
> diskobj->part = part;
> @@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
> *disk = diskobj;
>
> EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
> - ", offset " LBAF ", last_block %llu\n",
> + ", last_block %llu\n",
> diskobj->part,
> diskobj->media.media_present,
> diskobj->media.logical_partition,
> diskobj->media.removable_media,
> - diskobj->offset,
> diskobj->media.last_block);
>
> /* Store first EFI system partition */
> diff --git a/lib/efi_selftest/efi_selftest_block_device.c
> b/lib/efi_selftest/efi_selftest_block_device.c
> index 60fa655766..ef6bdafe2e 100644
> --- a/lib/efi_selftest/efi_selftest_block_device.c
> +++ b/lib/efi_selftest/efi_selftest_block_device.c
> @@ -11,6 +11,7 @@
> * ConnectController is used to setup partitions and to install the simple
> * file protocol.
> * A known file is read from the file system and verified.
> + * Test that the read_blocks API correctly reads a block from the device.
> */
>
> #include <efi_selftest.h>
> @@ -312,6 +313,7 @@ static int execute(void)
> char buf[16] __aligned(ARCH_DMA_MINALIGN);
> u32 part1_size;
> u64 pos;
> + char block[512];
>
> /* Connect controller to virtual disk */
> ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
> @@ -449,6 +451,23 @@ static int execute(void)
> return EFI_ST_FAILURE;
> }
>
> + /* Test read_blocks() can read same file data. */
> + boottime->set_mem(block, block_io_protocol->media->block_size, 0);
> + ret = block_io_protocol->read_blocks(block_io_protocol,
> + block_io_protocol->media->media_id,
> + (0x5000 >> LB_BLOCK_SIZE) - 1,
> + block_io_protocol->media->block_size,
> + block);
> + if (ret != EFI_SUCCESS) {
> + efi_st_error("ReadBlocks failed\n");
> + return EFI_ST_FAILURE;
> + }
> +
> + if (memcmp(&block[1], buf, 11)) {
> + efi_st_error("Unexpected block content\n");
> + return EFI_ST_FAILURE;
> + }
> +
> #ifdef CONFIG_FAT_WRITE
> /* Write file */
> ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for, UCLASS_PARTITION devices
2022-06-29 1:02 [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for, UCLASS_PARTITION devices Paul Barbieri
2022-06-29 4:43 ` AKASHI Takahiro
@ 2022-06-29 4:58 ` Heinrich Schuchardt
2022-06-29 17:44 ` [PATCH v2] EFI: Fix ReadBlocks API reading incorrect sector for " Paul Barbieri
2 siblings, 0 replies; 8+ messages in thread
From: Heinrich Schuchardt @ 2022-06-29 4:58 UTC (permalink / raw
To: Paul Barbieri; +Cc: takahiro.akashi, u-boot
On 6/29/22 03:02, Paul Barbieri wrote:
> From 7a7dd7f16352fc916279cca05a3fa617f8bbef64 Mon Sep 17 00:00:00 2001
> From: Paul Barbieri <plb365@gmail.com>
> Date: Tue, 28 Jun 2022 20:24:33 -0400
> Subject: [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for
> UCLASS_PARTITION devices
>
> The requested partition disk sector incorrectly has the partition start
> sector added in twice for UCLASS_PARTITION devices. The
> efi_disk_rw_blocks()
> routine adds the diskobj->offset to the requested lba. When the device
> is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
> which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
>
> Takahiro Akashi suggested removing the offset field from the efi_disk_obj
> structure since disk-uclass.c handles the partition start biasing. Device
> types other than UCLASS_PARTITION set the diskobj->offset field to zero
> which makes the field unnecessary. This change removes the offset field
> from the structure and removes all references from the code which is
> isolated to the lib/efi_loader/efi_disk.c module.
>
> This change also adds a test for the EFI ReadBlocks() API in the EFI
> selftest code. There is already a test for reading a FAT file. The new
> test uses ReadBlocks() to read the same "disk" block and compare it to
> the data read from the file system API.
This is not a valid patch:
$ git am /tmp/0.patch
warning: Patch sent with format=flowed; space at the end of lines might
be lost.
Applying: EFI: Fix ReadBlocks API reading incorrect sector for,
UCLASS_PARTITION devices
error: corrupt patch at line 11
Patch failed at 0001 EFI: Fix ReadBlocks API reading incorrect sector
for, UCLASS_PARTITION devices
Please, use 'git send-email' for sending patches not Thunderbird.
Best regards
Heinrich
>
> Signed-Off-by: Paul Barbieri <paul.barbieri@verizon.net>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
> lib/efi_loader/efi_disk.c | 8 +-------
> lib/efi_selftest/efi_selftest_block_device.c | 19 +++++++++++++++++++
> 2 files changed, 20 insertions(+), 7 deletions(-)
>
> diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
> index 1e82f52dc0..1d700b2a6b 100644
> --- a/lib/efi_loader/efi_disk.c
> +++ b/lib/efi_loader/efi_disk.c
> @@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid =
> PARTITION_SYSTEM_GUID;
> * @dp: device path to the block device
> * @part: partition
> * @volume: simple file system protocol of the partition
> - * @offset: offset into disk for simple partition
> * @dev: associated DM device
> */
> struct efi_disk_obj {
> @@ -47,7 +46,6 @@ struct efi_disk_obj {
> struct efi_device_path *dp;
> unsigned int part;
> struct efi_simple_file_system_protocol *volume;
> - lbaint_t offset;
> struct udevice *dev; /* TODO: move it to efi_object */
> };
>
> @@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct
> efi_block_io *this,
> diskobj = container_of(this, struct efi_disk_obj, ops);
> blksz = diskobj->media.block_size;
> blocks = buffer_size / blksz;
> - lba += diskobj->offset;
>
> EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
> blocks, lba, blksz, direction);
> @@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
>
> diskobj->dp = efi_dp_append_node(dp_parent, node);
> efi_free_pool(node);
> - diskobj->offset = part_info->start;
> diskobj->media.last_block = part_info->size - 1;
> if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
> guid = &efi_system_partition_guid;
> } else {
> diskobj->dp = efi_dp_from_part(desc, part);
> - diskobj->offset = 0;
> diskobj->media.last_block = desc->lba - 1;
> }
> diskobj->part = part;
> @@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
> *disk = diskobj;
>
> EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
> - ", offset " LBAF ", last_block %llu\n",
> + ", last_block %llu\n",
> diskobj->part,
> diskobj->media.media_present,
> diskobj->media.logical_partition,
> diskobj->media.removable_media,
> - diskobj->offset,
> diskobj->media.last_block);
>
> /* Store first EFI system partition */
> diff --git a/lib/efi_selftest/efi_selftest_block_device.c
> b/lib/efi_selftest/efi_selftest_block_device.c
> index 60fa655766..ef6bdafe2e 100644
> --- a/lib/efi_selftest/efi_selftest_block_device.c
> +++ b/lib/efi_selftest/efi_selftest_block_device.c
> @@ -11,6 +11,7 @@
> * ConnectController is used to setup partitions and to install the
> simple
> * file protocol.
> * A known file is read from the file system and verified.
> + * Test that the read_blocks API correctly reads a block from the device.
> */
>
> #include <efi_selftest.h>
> @@ -312,6 +313,7 @@ static int execute(void)
> char buf[16] __aligned(ARCH_DMA_MINALIGN);
> u32 part1_size;
> u64 pos;
> + char block[512];
>
> /* Connect controller to virtual disk */
> ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
> @@ -449,6 +451,23 @@ static int execute(void)
> return EFI_ST_FAILURE;
> }
>
> + /* Test read_blocks() can read same file data. */
> + boottime->set_mem(block, block_io_protocol->media->block_size, 0);
> + ret = block_io_protocol->read_blocks(block_io_protocol,
> + block_io_protocol->media->media_id,
> + (0x5000 >> LB_BLOCK_SIZE) - 1,
> + block_io_protocol->media->block_size,
> + block);
> + if (ret != EFI_SUCCESS) {
> + efi_st_error("ReadBlocks failed\n");
> + return EFI_ST_FAILURE;
> + }
> +
> + if (memcmp(&block[1], buf, 11)) {
> + efi_st_error("Unexpected block content\n");
> + return EFI_ST_FAILURE;
> + }
> +
> #ifdef CONFIG_FAT_WRITE
> /* Write file */
> ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v2] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices
2022-06-29 1:02 [PATCH] EFI: Fix ReadBlocks API reading incorrect sector for, UCLASS_PARTITION devices Paul Barbieri
2022-06-29 4:43 ` AKASHI Takahiro
2022-06-29 4:58 ` Heinrich Schuchardt
@ 2022-06-29 17:44 ` Paul Barbieri
2022-06-30 8:38 ` Heinrich Schuchardt
2 siblings, 1 reply; 8+ messages in thread
From: Paul Barbieri @ 2022-06-29 17:44 UTC (permalink / raw
To: u-boot; +Cc: Paul Barbieri, Heinrich Schuchardt, AKASHI Takahiro
The requsted partition disk sector incorrectly has the parition start
sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
routine adds the diskobj->offset to the requested lba. When the device
is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
Takahiro Akashi suggested removing the offset field from the efi_disk_obj
structure since disk-uclass.c handles the partition start biasing. Device
types other than UCLASS_PARTITION set the diskobj->offset field to zero
which makes the field unnecessary. This change removes the offset field
from the structure and removes all references from the code which is
isolated to the lib/efi_loader/efi_disk.c module.
This change also adds a test for the EFI ReadBlocks() API in the EFI
selftest code. There is already a test for reading a FAT file. The new
test uses ReadBlocks() to read the same "disk" block and compare it to
the data read from the file system API.
I verified that the test was using the correct code path by defining DEBUG
in lib/efi_loader/efi_disk.c This showed that when the test was run,
efi_disk_read_blocks() was executed and it called efi_disk_rw_blocks().
Adding a little extra debug, I saw that efi_disk_rw_blocks() called dev_read().
I also added a debug print in the read_blocks() routine of
efi_selftest_block_device.c. One thing to note, if I moved the read_blocks test
before the file system test, I would see the read_blocks() routine print
in the middle of the efi_disk_rw_blocks() routine. If I put the test after
the file system test, I don't see read_blocks() get called. I assume this
is because dev_read() is able to get the block from the cache.
Signed-Off-by: Paul Barbieri <plb365@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
lib/efi_loader/efi_disk.c | 8 +------
lib/efi_selftest/efi_selftest_block_device.c | 23 ++++++++++++++++++++
2 files changed, 24 insertions(+), 7 deletions(-)
diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
index 1e82f52dc0..1d700b2a6b 100644
--- a/lib/efi_loader/efi_disk.c
+++ b/lib/efi_loader/efi_disk.c
@@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid = PARTITION_SYSTEM_GUID;
* @dp: device path to the block device
* @part: partition
* @volume: simple file system protocol of the partition
- * @offset: offset into disk for simple partition
* @dev: associated DM device
*/
struct efi_disk_obj {
@@ -47,7 +46,6 @@ struct efi_disk_obj {
struct efi_device_path *dp;
unsigned int part;
struct efi_simple_file_system_protocol *volume;
- lbaint_t offset;
struct udevice *dev; /* TODO: move it to efi_object */
};
@@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct efi_block_io *this,
diskobj = container_of(this, struct efi_disk_obj, ops);
blksz = diskobj->media.block_size;
blocks = buffer_size / blksz;
- lba += diskobj->offset;
EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
blocks, lba, blksz, direction);
@@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
diskobj->dp = efi_dp_append_node(dp_parent, node);
efi_free_pool(node);
- diskobj->offset = part_info->start;
diskobj->media.last_block = part_info->size - 1;
if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
guid = &efi_system_partition_guid;
} else {
diskobj->dp = efi_dp_from_part(desc, part);
- diskobj->offset = 0;
diskobj->media.last_block = desc->lba - 1;
}
diskobj->part = part;
@@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
*disk = diskobj;
EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
- ", offset " LBAF ", last_block %llu\n",
+ ", last_block %llu\n",
diskobj->part,
diskobj->media.media_present,
diskobj->media.logical_partition,
diskobj->media.removable_media,
- diskobj->offset,
diskobj->media.last_block);
/* Store first EFI system partition */
diff --git a/lib/efi_selftest/efi_selftest_block_device.c b/lib/efi_selftest/efi_selftest_block_device.c
index 60fa655766..7b50c829ad 100644
--- a/lib/efi_selftest/efi_selftest_block_device.c
+++ b/lib/efi_selftest/efi_selftest_block_device.c
@@ -11,6 +11,7 @@
* ConnectController is used to setup partitions and to install the simple
* file protocol.
* A known file is read from the file system and verified.
+ * Test that the read_blocks API correctly reads a block from the device.
*/
#include <efi_selftest.h>
@@ -312,6 +313,9 @@ static int execute(void)
char buf[16] __aligned(ARCH_DMA_MINALIGN);
u32 part1_size;
u64 pos;
+ char block[2 * (1 << LB_BLOCK_SIZE)];
+ char *block_io_aligned;
+ u32 align;
/* Connect controller to virtual disk */
ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
@@ -449,6 +453,25 @@ static int execute(void)
return EFI_ST_FAILURE;
}
+ /* Test read_blocks() can read same file data. */
+ boottime->set_mem(block, sizeof(block), 0);
+ align = block_io_protocol->media->io_align;
+ block_io_aligned = (char *)(((uintptr_t)block + align-1) & ~(align-1));
+ ret = block_io_protocol->read_blocks(block_io_protocol,
+ block_io_protocol->media->media_id,
+ (0x5000 >> LB_BLOCK_SIZE) - 1,
+ block_io_protocol->media->block_size,
+ block_io_aligned);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("ReadBlocks failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (memcmp(&block_io_aligned[1], buf, 11)) {
+ efi_st_error("Unexpected block content\n");
+ return EFI_ST_FAILURE;
+ }
+
#ifdef CONFIG_FAT_WRITE
/* Write file */
ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v2] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices
2022-06-29 17:44 ` [PATCH v2] EFI: Fix ReadBlocks API reading incorrect sector for " Paul Barbieri
@ 2022-06-30 8:38 ` Heinrich Schuchardt
2022-06-30 11:02 ` [PATCH v3] " Paul Barbieri
0 siblings, 1 reply; 8+ messages in thread
From: Heinrich Schuchardt @ 2022-06-30 8:38 UTC (permalink / raw
To: Paul Barbieri; +Cc: AKASHI Takahiro, u-boot
On 6/29/22 19:44, Paul Barbieri wrote:
> The requsted partition disk sector incorrectly has the parition start
> sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
> routine adds the diskobj->offset to the requested lba. When the device
> is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
> which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
>
> Takahiro Akashi suggested removing the offset field from the efi_disk_obj
> structure since disk-uclass.c handles the partition start biasing. Device
> types other than UCLASS_PARTITION set the diskobj->offset field to zero
> which makes the field unnecessary. This change removes the offset field
> from the structure and removes all references from the code which is
> isolated to the lib/efi_loader/efi_disk.c module.
>
> This change also adds a test for the EFI ReadBlocks() API in the EFI
> selftest code. There is already a test for reading a FAT file. The new
> test uses ReadBlocks() to read the same "disk" block and compare it to
> the data read from the file system API.
>
> I verified that the test was using the correct code path by defining DEBUG
> in lib/efi_loader/efi_disk.c This showed that when the test was run,
> efi_disk_read_blocks() was executed and it called efi_disk_rw_blocks().
> Adding a little extra debug, I saw that efi_disk_rw_blocks() called dev_read().
> I also added a debug print in the read_blocks() routine of
> efi_selftest_block_device.c. One thing to note, if I moved the read_blocks test
> before the file system test, I would see the read_blocks() routine print
> in the middle of the efi_disk_rw_blocks() routine. If I put the test after
> the file system test, I don't see read_blocks() get called. I assume this
> is because dev_read() is able to get the block from the cache.
>
>
> Signed-Off-by: Paul Barbieri <plb365@gmail.com>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
> lib/efi_loader/efi_disk.c | 8 +------
> lib/efi_selftest/efi_selftest_block_device.c | 23 ++++++++++++++++++++
> 2 files changed, 24 insertions(+), 7 deletions(-)
>
> diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
> index 1e82f52dc0..1d700b2a6b 100644
> --- a/lib/efi_loader/efi_disk.c
> +++ b/lib/efi_loader/efi_disk.c
> @@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid = PARTITION_SYSTEM_GUID;
> * @dp: device path to the block device
> * @part: partition
> * @volume: simple file system protocol of the partition
> - * @offset: offset into disk for simple partition
> * @dev: associated DM device
> */
> struct efi_disk_obj {
> @@ -47,7 +46,6 @@ struct efi_disk_obj {
> struct efi_device_path *dp;
> unsigned int part;
> struct efi_simple_file_system_protocol *volume;
> - lbaint_t offset;
> struct udevice *dev; /* TODO: move it to efi_object */
> };
>
> @@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct efi_block_io *this,
> diskobj = container_of(this, struct efi_disk_obj, ops);
> blksz = diskobj->media.block_size;
> blocks = buffer_size / blksz;
> - lba += diskobj->offset;
>
> EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
> blocks, lba, blksz, direction);
> @@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
>
> diskobj->dp = efi_dp_append_node(dp_parent, node);
> efi_free_pool(node);
> - diskobj->offset = part_info->start;
> diskobj->media.last_block = part_info->size - 1;
> if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
> guid = &efi_system_partition_guid;
> } else {
> diskobj->dp = efi_dp_from_part(desc, part);
> - diskobj->offset = 0;
> diskobj->media.last_block = desc->lba - 1;
> }
> diskobj->part = part;
> @@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
> *disk = diskobj;
>
> EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
> - ", offset " LBAF ", last_block %llu\n",
> + ", last_block %llu\n",
> diskobj->part,
> diskobj->media.media_present,
> diskobj->media.logical_partition,
> diskobj->media.removable_media,
> - diskobj->offset,
> diskobj->media.last_block);
>
> /* Store first EFI system partition */
> diff --git a/lib/efi_selftest/efi_selftest_block_device.c b/lib/efi_selftest/efi_selftest_block_device.c
> index 60fa655766..7b50c829ad 100644
> --- a/lib/efi_selftest/efi_selftest_block_device.c
> +++ b/lib/efi_selftest/efi_selftest_block_device.c
> @@ -11,6 +11,7 @@
> * ConnectController is used to setup partitions and to install the simple
> * file protocol.
> * A known file is read from the file system and verified.
> + * Test that the read_blocks API correctly reads a block from the device.
> */
>
> #include <efi_selftest.h>
> @@ -312,6 +313,9 @@ static int execute(void)
> char buf[16] __aligned(ARCH_DMA_MINALIGN);
> u32 part1_size;
> u64 pos;
> + char block[2 * (1 << LB_BLOCK_SIZE)];
> + char *block_io_aligned;
> + u32 align;
>
> /* Connect controller to virtual disk */
> ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
> @@ -449,6 +453,25 @@ static int execute(void)
> return EFI_ST_FAILURE;
> }
>
> + /* Test read_blocks() can read same file data. */
> + boottime->set_mem(block, sizeof(block), 0);
> + align = block_io_protocol->media->io_align;
> + block_io_aligned = (char *)(((uintptr_t)block + align-1) & ~(align-1));
> + ret = block_io_protocol->read_blocks(block_io_protocol,
> + block_io_protocol->media->media_id,
> + (0x5000 >> LB_BLOCK_SIZE) - 1,
This code really needs a comment. E.g.
In the test data
* the partition starts at block 1
* the file hello.txt with content 'Hello world!' is located at 0x5000 of
the disk
Here we read block 0x27 (offset 0x4e00 of the partition) and expect the
string 'Hello world!' to be at the start of the block.
Best regards
Heinrich
> + block_io_protocol->media->block_size,
> + block_io_aligned);
> + if (ret != EFI_SUCCESS) {
> + efi_st_error("ReadBlocks failed\n");
> + return EFI_ST_FAILURE;
> + }
> +
> + if (memcmp(&block_io_aligned[1], buf, 11)) {
> + efi_st_error("Unexpected block content\n");
> + return EFI_ST_FAILURE;
> + }
> +
> #ifdef CONFIG_FAT_WRITE
> /* Write file */
> ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v3] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices
2022-06-30 8:38 ` Heinrich Schuchardt
@ 2022-06-30 11:02 ` Paul Barbieri
2022-07-02 8:18 ` Heinrich Schuchardt
0 siblings, 1 reply; 8+ messages in thread
From: Paul Barbieri @ 2022-06-30 11:02 UTC (permalink / raw
To: u-boot; +Cc: Paul Barbieri, Heinrich Schuchardt, AKASHI Takahiro
The requsted partition disk sector incorrectly has the parition start
sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
routine adds the diskobj->offset to the requested lba. When the device
is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
Takahiro Akashi suggested removing the offset field from the efi_disk_obj
structure since disk-uclass.c handles the partition start biasing. Device
types other than UCLASS_PARTITION set the diskobj->offset field to zero
which makes the field unnecessary. This change removes the offset field
from the structure and removes all references from the code which is
isolated to the lib/efi_loader/efi_disk.c module.
This change also adds a test for the EFI ReadBlocks() API in the EFI
selftest code. There is already a test for reading a FAT file. The new
test uses ReadBlocks() to read the same "disk" block and compare it to
the data read from the file system API.
Signed-Off-by: Paul Barbieri <plb365@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
Changes for v3:
- Added requested comment in test code
lib/efi_loader/efi_disk.c | 8 +-----
lib/efi_selftest/efi_selftest_block_device.c | 28 ++++++++++++++++++++
2 files changed, 29 insertions(+), 7 deletions(-)
diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
index 1e82f52dc0..1d700b2a6b 100644
--- a/lib/efi_loader/efi_disk.c
+++ b/lib/efi_loader/efi_disk.c
@@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid = PARTITION_SYSTEM_GUID;
* @dp: device path to the block device
* @part: partition
* @volume: simple file system protocol of the partition
- * @offset: offset into disk for simple partition
* @dev: associated DM device
*/
struct efi_disk_obj {
@@ -47,7 +46,6 @@ struct efi_disk_obj {
struct efi_device_path *dp;
unsigned int part;
struct efi_simple_file_system_protocol *volume;
- lbaint_t offset;
struct udevice *dev; /* TODO: move it to efi_object */
};
@@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct efi_block_io *this,
diskobj = container_of(this, struct efi_disk_obj, ops);
blksz = diskobj->media.block_size;
blocks = buffer_size / blksz;
- lba += diskobj->offset;
EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
blocks, lba, blksz, direction);
@@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
diskobj->dp = efi_dp_append_node(dp_parent, node);
efi_free_pool(node);
- diskobj->offset = part_info->start;
diskobj->media.last_block = part_info->size - 1;
if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
guid = &efi_system_partition_guid;
} else {
diskobj->dp = efi_dp_from_part(desc, part);
- diskobj->offset = 0;
diskobj->media.last_block = desc->lba - 1;
}
diskobj->part = part;
@@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
*disk = diskobj;
EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
- ", offset " LBAF ", last_block %llu\n",
+ ", last_block %llu\n",
diskobj->part,
diskobj->media.media_present,
diskobj->media.logical_partition,
diskobj->media.removable_media,
- diskobj->offset,
diskobj->media.last_block);
/* Store first EFI system partition */
diff --git a/lib/efi_selftest/efi_selftest_block_device.c b/lib/efi_selftest/efi_selftest_block_device.c
index 60fa655766..d11f673148 100644
--- a/lib/efi_selftest/efi_selftest_block_device.c
+++ b/lib/efi_selftest/efi_selftest_block_device.c
@@ -11,6 +11,7 @@
* ConnectController is used to setup partitions and to install the simple
* file protocol.
* A known file is read from the file system and verified.
+ * Test that the read_blocks API correctly reads a block from the device.
*/
#include <efi_selftest.h>
@@ -312,6 +313,9 @@ static int execute(void)
char buf[16] __aligned(ARCH_DMA_MINALIGN);
u32 part1_size;
u64 pos;
+ char block[2 * (1 << LB_BLOCK_SIZE)];
+ char *block_io_aligned;
+ u32 align;
/* Connect controller to virtual disk */
ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
@@ -449,6 +453,30 @@ static int execute(void)
return EFI_ST_FAILURE;
}
+ /* Test read_blocks() can read same file data. */
+ boottime->set_mem(block, sizeof(block), 0);
+ align = block_io_protocol->media->io_align;
+ block_io_aligned = (char *)(((uintptr_t)block + align-1) & ~(align-1));
+ /* In the test data, the partition starts at block 1 and the file
+ hello.txt with the content 'Hello world!' is located at 0x5000
+ of the disk. Here we read block 0x27 (offset 0x4e00 of the
+ partition) and expect the string 'Hello world!' to be at the
+ start of block. */
+ ret = block_io_protocol->read_blocks(block_io_protocol,
+ block_io_protocol->media->media_id,
+ (0x5000 >> LB_BLOCK_SIZE) - 1,
+ block_io_protocol->media->block_size,
+ block_io_aligned);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("ReadBlocks failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (memcmp(&block_io_aligned[1], buf, 11)) {
+ efi_st_error("Unexpected block content\n");
+ return EFI_ST_FAILURE;
+ }
+
#ifdef CONFIG_FAT_WRITE
/* Write file */
ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v3] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices
2022-06-30 11:02 ` [PATCH v3] " Paul Barbieri
@ 2022-07-02 8:18 ` Heinrich Schuchardt
2022-07-02 11:20 ` [PATCH v4] " Paul Barbieri
0 siblings, 1 reply; 8+ messages in thread
From: Heinrich Schuchardt @ 2022-07-02 8:18 UTC (permalink / raw
To: Paul Barbieri; +Cc: AKASHI Takahiro, u-boot
On 6/30/22 13:02, Paul Barbieri wrote:
> The requsted partition disk sector incorrectly has the parition start
> sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
> routine adds the diskobj->offset to the requested lba. When the device
> is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
> which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
>
> Takahiro Akashi suggested removing the offset field from the efi_disk_obj
> structure since disk-uclass.c handles the partition start biasing. Device
> types other than UCLASS_PARTITION set the diskobj->offset field to zero
> which makes the field unnecessary. This change removes the offset field
> from the structure and removes all references from the code which is
> isolated to the lib/efi_loader/efi_disk.c module.
>
> This change also adds a test for the EFI ReadBlocks() API in the EFI
> selftest code. There is already a test for reading a FAT file. The new
> test uses ReadBlocks() to read the same "disk" block and compare it to
> the data read from the file system API.
>
> Signed-Off-by: Paul Barbieri <plb365@gmail.com>
> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
> ---
> Changes for v3:
> - Added requested comment in test code
>
> lib/efi_loader/efi_disk.c | 8 +-----
> lib/efi_selftest/efi_selftest_block_device.c | 28 ++++++++++++++++++++
> 2 files changed, 29 insertions(+), 7 deletions(-)
>
> diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
> index 1e82f52dc0..1d700b2a6b 100644
> --- a/lib/efi_loader/efi_disk.c
> +++ b/lib/efi_loader/efi_disk.c
> @@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid = PARTITION_SYSTEM_GUID;
> * @dp: device path to the block device
> * @part: partition
> * @volume: simple file system protocol of the partition
> - * @offset: offset into disk for simple partition
> * @dev: associated DM device
> */
> struct efi_disk_obj {
> @@ -47,7 +46,6 @@ struct efi_disk_obj {
> struct efi_device_path *dp;
> unsigned int part;
> struct efi_simple_file_system_protocol *volume;
> - lbaint_t offset;
> struct udevice *dev; /* TODO: move it to efi_object */
> };
>
> @@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct efi_block_io *this,
> diskobj = container_of(this, struct efi_disk_obj, ops);
> blksz = diskobj->media.block_size;
> blocks = buffer_size / blksz;
> - lba += diskobj->offset;
>
> EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
> blocks, lba, blksz, direction);
> @@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
>
> diskobj->dp = efi_dp_append_node(dp_parent, node);
> efi_free_pool(node);
> - diskobj->offset = part_info->start;
> diskobj->media.last_block = part_info->size - 1;
> if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
> guid = &efi_system_partition_guid;
> } else {
> diskobj->dp = efi_dp_from_part(desc, part);
> - diskobj->offset = 0;
> diskobj->media.last_block = desc->lba - 1;
> }
> diskobj->part = part;
> @@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
> *disk = diskobj;
>
> EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
> - ", offset " LBAF ", last_block %llu\n",
> + ", last_block %llu\n",
> diskobj->part,
> diskobj->media.media_present,
> diskobj->media.logical_partition,
> diskobj->media.removable_media,
> - diskobj->offset,
> diskobj->media.last_block);
>
> /* Store first EFI system partition */
> diff --git a/lib/efi_selftest/efi_selftest_block_device.c b/lib/efi_selftest/efi_selftest_block_device.c
> index 60fa655766..d11f673148 100644
> --- a/lib/efi_selftest/efi_selftest_block_device.c
> +++ b/lib/efi_selftest/efi_selftest_block_device.c
> @@ -11,6 +11,7 @@
> * ConnectController is used to setup partitions and to install the simple
> * file protocol.
> * A known file is read from the file system and verified.
> + * Test that the read_blocks API correctly reads a block from the device.
> */
>
> #include <efi_selftest.h>
> @@ -312,6 +313,9 @@ static int execute(void)
> char buf[16] __aligned(ARCH_DMA_MINALIGN);
> u32 part1_size;
> u64 pos;
> + char block[2 * (1 << LB_BLOCK_SIZE)];
> + char *block_io_aligned;
> + u32 align;
>
> /* Connect controller to virtual disk */
> ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
> @@ -449,6 +453,30 @@ static int execute(void)
> return EFI_ST_FAILURE;
> }
>
> + /* Test read_blocks() can read same file data. */
> + boottime->set_mem(block, sizeof(block), 0);
> + align = block_io_protocol->media->io_align;
> + block_io_aligned = (char *)(((uintptr_t)block + align-1) & ~(align-1));
Align is a 32 bit value but the pointer may be a 64 bit address:
Running the test on the sandbox results in a crash:
align: 512
block: 0x00007ffe78df28b8
block_io_aligned: 0x0000000078df2a00
Segmentation fault (core dumped)
IoAlign = 0 is an allowable value. Your code would set the last 32 bits
to zero in this case.
Keep it simple. Just define block_io_align as an LB_BLOCK_SIZE aligned
array of size LB_BLOCK_SIZE. Anyway the block driver in this unit test
does not care about alignment. read_blocks() only executes memcpy().
Best regards
Heinrich
> + /* In the test data, the partition starts at block 1 and the file
> + hello.txt with the content 'Hello world!' is located at 0x5000
> + of the disk. Here we read block 0x27 (offset 0x4e00 of the
> + partition) and expect the string 'Hello world!' to be at the
> + start of block. */
> + ret = block_io_protocol->read_blocks(block_io_protocol,
> + block_io_protocol->media->media_id,
> + (0x5000 >> LB_BLOCK_SIZE) - 1,
> + block_io_protocol->media->block_size,
> + block_io_aligned);
> + if (ret != EFI_SUCCESS) {
> + efi_st_error("ReadBlocks failed\n");
> + return EFI_ST_FAILURE;
> + }
> +
> + if (memcmp(&block_io_aligned[1], buf, 11)) {
> + efi_st_error("Unexpected block content\n");
> + return EFI_ST_FAILURE;
> + }
> +
> #ifdef CONFIG_FAT_WRITE
> /* Write file */
> ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH v4] EFI: Fix ReadBlocks API reading incorrect sector for UCLASS_PARTITION devices
2022-07-02 8:18 ` Heinrich Schuchardt
@ 2022-07-02 11:20 ` Paul Barbieri
0 siblings, 0 replies; 8+ messages in thread
From: Paul Barbieri @ 2022-07-02 11:20 UTC (permalink / raw
To: u-boot; +Cc: Paul Barbieri, Heinrich Schuchardt, AKASHI Takahiro
The requsted partition disk sector incorrectly has the parition start
sector added in twice for UCLASS_PARTITION devices. The efi_disk_rw_blocks()
routine adds the diskobj->offset to the requested lba. When the device
is a UCLASS_PARTITION, the dev_read() or dev_write() routine is called
which adds part-gpt_part_info.start. This causes I/O to the wrong sector.
Takahiro Akashi suggested removing the offset field from the efi_disk_obj
structure since disk-uclass.c handles the partition start biasing. Device
types other than UCLASS_PARTITION set the diskobj->offset field to zero
which makes the field unnecessary. This change removes the offset field
from the structure and removes all references from the code which is
isolated to the lib/efi_loader/efi_disk.c module.
This change also adds a test for the EFI ReadBlocks() API in the EFI
selftest code. There is already a test for reading a FAT file. The new
test uses ReadBlocks() to read the same "disk" block and compare it to
the data read from the file system API.
Signed-Off-by: Paul Barbieri <plb365@gmail.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
Changes for v3:
- Added requested comment in test code
Changes for v4:
- Use aligned buffer instead of computing aligned address
lib/efi_loader/efi_disk.c | 8 +------
lib/efi_selftest/efi_selftest_block_device.c | 24 ++++++++++++++++++++
2 files changed, 25 insertions(+), 7 deletions(-)
diff --git a/lib/efi_loader/efi_disk.c b/lib/efi_loader/efi_disk.c
index 1e82f52dc0..1d700b2a6b 100644
--- a/lib/efi_loader/efi_disk.c
+++ b/lib/efi_loader/efi_disk.c
@@ -35,7 +35,6 @@ const efi_guid_t efi_system_partition_guid = PARTITION_SYSTEM_GUID;
* @dp: device path to the block device
* @part: partition
* @volume: simple file system protocol of the partition
- * @offset: offset into disk for simple partition
* @dev: associated DM device
*/
struct efi_disk_obj {
@@ -47,7 +46,6 @@ struct efi_disk_obj {
struct efi_device_path *dp;
unsigned int part;
struct efi_simple_file_system_protocol *volume;
- lbaint_t offset;
struct udevice *dev; /* TODO: move it to efi_object */
};
@@ -117,7 +115,6 @@ static efi_status_t efi_disk_rw_blocks(struct efi_block_io *this,
diskobj = container_of(this, struct efi_disk_obj, ops);
blksz = diskobj->media.block_size;
blocks = buffer_size / blksz;
- lba += diskobj->offset;
EFI_PRINT("blocks=%x lba=%llx blksz=%x dir=%d\n",
blocks, lba, blksz, direction);
@@ -440,13 +437,11 @@ static efi_status_t efi_disk_add_dev(
diskobj->dp = efi_dp_append_node(dp_parent, node);
efi_free_pool(node);
- diskobj->offset = part_info->start;
diskobj->media.last_block = part_info->size - 1;
if (part_info->bootable & PART_EFI_SYSTEM_PARTITION)
guid = &efi_system_partition_guid;
} else {
diskobj->dp = efi_dp_from_part(desc, part);
- diskobj->offset = 0;
diskobj->media.last_block = desc->lba - 1;
}
diskobj->part = part;
@@ -501,12 +496,11 @@ static efi_status_t efi_disk_add_dev(
*disk = diskobj;
EFI_PRINT("BlockIO: part %u, present %d, logical %d, removable %d"
- ", offset " LBAF ", last_block %llu\n",
+ ", last_block %llu\n",
diskobj->part,
diskobj->media.media_present,
diskobj->media.logical_partition,
diskobj->media.removable_media,
- diskobj->offset,
diskobj->media.last_block);
/* Store first EFI system partition */
diff --git a/lib/efi_selftest/efi_selftest_block_device.c b/lib/efi_selftest/efi_selftest_block_device.c
index 60fa655766..6da923909e 100644
--- a/lib/efi_selftest/efi_selftest_block_device.c
+++ b/lib/efi_selftest/efi_selftest_block_device.c
@@ -11,6 +11,7 @@
* ConnectController is used to setup partitions and to install the simple
* file protocol.
* A known file is read from the file system and verified.
+ * Test that the read_blocks API correctly reads a block from the device.
*/
#include <efi_selftest.h>
@@ -312,6 +313,7 @@ static int execute(void)
char buf[16] __aligned(ARCH_DMA_MINALIGN);
u32 part1_size;
u64 pos;
+ char block[1 << LB_BLOCK_SIZE] __aligned(1 << LB_BLOCK_SIZE);
/* Connect controller to virtual disk */
ret = boottime->connect_controller(disk_handle, NULL, NULL, 1);
@@ -449,6 +451,28 @@ static int execute(void)
return EFI_ST_FAILURE;
}
+ /* Test read_blocks() can read same file data. */
+ boottime->set_mem(block, sizeof(block), 0);
+ /* In the test data, the partition starts at block 1 and the file
+ hello.txt with the content 'Hello world!' is located at 0x5000
+ of the disk. Here we read block 0x27 (offset 0x4e00 of the
+ partition) and expect the string 'Hello world!' to be at the
+ start of block. */
+ ret = block_io_protocol->read_blocks(block_io_protocol,
+ block_io_protocol->media->media_id,
+ (0x5000 >> LB_BLOCK_SIZE) - 1,
+ block_io_protocol->media->block_size,
+ block);
+ if (ret != EFI_SUCCESS) {
+ efi_st_error("ReadBlocks failed\n");
+ return EFI_ST_FAILURE;
+ }
+
+ if (memcmp(&block[1], buf, 11)) {
+ efi_st_error("Unexpected block content\n");
+ return EFI_ST_FAILURE;
+ }
+
#ifdef CONFIG_FAT_WRITE
/* Write file */
ret = root->open(root, &file, u"u-boot.txt", EFI_FILE_MODE_READ |
--
2.17.1
^ permalink raw reply related [flat|nested] 8+ messages in thread