messages from 2015-08-25 19:14:36 to 2015-08-26 16:18:03 UTC [more...]
[U-Boot] [PATCH v2 0/5] fix NetConsole for CONFIG_DM_ETH
2015-08-26 16:18 UTC (9+ messages)
` [U-Boot] [PATCH v2 1/5] net: expose eth_is_active() function to test network device state
` [U-Boot] [PATCH v2 2/5] net: fix netconsole when CONFIG_DM_ETH is set
` [U-Boot] [PATCH v2 3/5] net: avoid eth_unregister() call when function is unavailable
` [U-Boot] [PATCH v2 4/5] net: support NETCONSOLE option via Kconfig
` [U-Boot] [PATCH v2 5/5] sunxi: add NetConsole by default for Banana Pi/Pro
[U-Boot] [PATCH] spi: cadence_qspi: Enable quad mode for read and programming
2015-08-26 15:57 UTC (19+ messages)
[U-Boot] [PATCH v2 01/10] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"
2015-08-26 15:42 UTC (25+ messages)
` [U-Boot] [PATCH v2 02/10] net: e1000: Fix build warnings for 32-bit
` [U-Boot] [PATCH v2 03/10] dm: eth: Do not print misleading "Net Initialization Skipped"
` [U-Boot] [PATCH v2 04/10] dm: test: Add a new test case for dm_test_eth_rotate
` [U-Boot] [PATCH v2 05/10] dm: eth: Correctly detect alias in eth_get_dev_by_name()
` [U-Boot] [PATCH v2 06/10] x86: crownbay: Convert to use CONFIG_DM_USB
` [U-Boot] [PATCH v2 07/10] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000
` [U-Boot] [PATCH v2 08/10] net: pch_gbe: Convert to driver model
` [U-Boot] [PATCH v2 09/10] net: pch_gbe: Add Kconfig option
` [U-Boot] [PATCH v2 10/10] x86: crownbay: Enable CONFIG_PCH_GBE
[U-Boot] [GIT] Pull request: u-boot-dfu
2015-08-26 15:32 UTC
[U-Boot] [PATCH v4 0/9] dfu: tftp: update: Support for DFU upgrades via ETH (TFTP)
2015-08-26 15:17 UTC (5+ messages)
[U-Boot] [PATCH v3 1/7] x86: i8042: Remove unused codes
2015-08-26 14:56 UTC (18+ messages)
` [U-Boot] [PATCH v3 2/7] x86: i8042: Reorder static functions
` [U-Boot] [PATCH v3 3/7] x86: i8042: Clean up the driver per coding convention
` [U-Boot] [PATCH v3 4/7] x86: i8042: Correctly initialize the controller
` [U-Boot] [PATCH v3 5/7] video: cfb_console: Allow VGA device to work without i8042 keyboard
` [U-Boot] [PATCH v3 6/7] x86: crownbay: Enable on-board SMSC superio keyboard controller
` [U-Boot] [PATCH v3 7/7] video: ct69000: Remove unused codes
[U-Boot] [PATCH v4 0/4] dm: pci: Support pci devices in the device tree with driver model
2015-08-26 14:55 UTC (10+ messages)
` [U-Boot] [PATCH v4 1/4] dm: pci: Optimize pci_uclass_post_bind()
` [U-Boot] [PATCH v4 2/4] dm: core: Fix code reentrancy issue in device_probe_child()
` [U-Boot] [PATCH v4 3/4] x86: crownbay: Support Topcliff integrated pci uart devices with driver model
` [U-Boot] [PATCH v4 4/4] dm: pci: Document binding of pci device drivers
[U-Boot] [PATCH v2 0/9] x86: gpio: Tidy up GPIO driver
2015-08-26 14:55 UTC (11+ messages)
` [U-Boot] [PATCH v2 1/9] x86: minnowmax: Add access to GPIOs E0, E1, E2
` [U-Boot] [PATCH v2 3/9] dm: pci: Add a comment to help find pci_hose_read_config_byte, etc
` [U-Boot] [PATCH v2 4/9] x86: minnowmax: Correct pad-offset value for host_en1
` [U-Boot] [PATCH v2 6/9] x86: gpio: Correct calls to _ich6_gpio_set_direction()
` [U-Boot] [PATCH v2 7/9] x86: gpio: Tidy up gpio_ich6_get_base() and callers
[U-Boot] [PATCH 00/10] Kconfig and ti omap configs tidy up
2015-08-26 14:54 UTC (11+ messages)
` [U-Boot] [PATCH 01/10] configs: remove remnants of CONFIG_SYS_NAND_QUIET_TEST
` [U-Boot] [PATCH 02/10] Kconfig: fix typo in CONFIG_FIT description
` [U-Boot] [PATCH 03/10] Kconfig: add CONFIG_BOOTDELAY
` [U-Boot] [PATCH 04/10] Kconfig: add CONFIG_CMD_BOOTZ
` [U-Boot] [PATCH 05/10] ti: omap3: config: remove 1 from boolean define
` [U-Boot] [PATCH 06/10] ti: omap/am: move CONFIG_HUSH_PARSER to defconfig
` [U-Boot] [PATCH 07/10] ti: omap/am: move CONFIG_CMD_BOOTZ "
` [U-Boot] [PATCH 08/10] ti: omap/am: move CONFIG_CMD_NAND "
` [U-Boot] [PATCH 09/10] ti: omap/am: move CONFIG_CMD_I2C "
` [U-Boot] [PATCH 10/10] ti: omap/am: move CONFIG_BOOTDELAY "
[U-Boot] [PATCH] ARM: ti_armv7_common: Use partuuid for detecting mmc root fs
2015-08-26 14:30 UTC (2+ messages)
[U-Boot] DWMMC crontroller in Exynos4412
2015-08-26 14:12 UTC (6+ messages)
[U-Boot] Can't start Linux if U-Boot built with CONFIG_WATCHDOG
2015-08-26 14:04 UTC (2+ messages)
[U-Boot] Exynos 5800/5422 CPU ID inconsistency
2015-08-26 13:37 UTC (2+ messages)
[U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30
2015-08-26 13:32 UTC (3+ messages)
[U-Boot] [PATCH 3/5] arm: tegra30: video: integrate display driver for t30
2015-08-26 13:32 UTC (9+ messages)
[U-Boot] [PATCH] omap-common: SYS_BOOT fallback logic correction
2015-08-26 13:23 UTC (5+ messages)
[U-Boot] [PATCH v4 00/33] dm: Introduce Rockchip RK3288 support
2015-08-26 13:20 UTC (9+ messages)
` [U-Boot] [PATCH v4 01/33] pinctrl: Correct build errors in the pinctrl_simple
` [U-Boot] [PATCH v4 03/33] pinctrl: Add the concept of peripheral IDs
[U-Boot] [PATCH] driver: misc: correct Kconfig entry
2015-08-26 13:19 UTC (2+ messages)
[U-Boot] [PATCH v5 01/13] power: pmic: add pfuze3000 support
2015-08-26 10:24 UTC (5+ messages)
` [U-Boot] [PATCH v5 06/13] imx: system counter driver for imx7d and mx6ul
[U-Boot] [PATCH v2 0/3] arm: Move all boards over to generic board
2015-08-26 10:18 UTC (8+ messages)
` [U-Boot] [PATCH v2 1/3] arm: Enable CONFIG_SYS_GENERIC_BOARD for all boards
[U-Boot] [PATCH v3 1/2] Makefile: Use correct timezone for U_BOOT_TZ
2015-08-26 10:01 UTC (6+ messages)
` [U-Boot] [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ
` [U-Boot] about reproducible builds (was Re: [PATCH v3 2/2] Makefile: Add SOURCE_DATE_TZ)
[U-Boot] Periodic task
2015-08-26 9:45 UTC (7+ messages)
[U-Boot] [PATCH resend V2 1/3] mtd: nand: mxs support oobsize bigger than 512
2015-08-26 7:59 UTC (7+ messages)
` [U-Boot] [PATCH V2 2/3] mtd: nand: mxs check maximum ecc that platfrom supports
[U-Boot] [PATCH] imx-common: timer: clean up code
2015-08-26 7:40 UTC
[U-Boot] [PATCH V2] mxc: ocotp fix hole in shadow registers
2015-08-26 7:40 UTC
[U-Boot] [PATCH 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel
2015-08-26 6:54 UTC (13+ messages)
[U-Boot] [RESEND PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes
2015-08-26 6:07 UTC (9+ messages)
` [U-Boot] [RESEND PATCH v4 1/5] spi: cadence_qspi: move trigger base configuration in init
` [U-Boot] [RESEND PATCH v4 2/5] spi: cadence_qspi: fix indirect read/write start address
` [U-Boot] [RESEND PATCH v4 3/5] spi: cadence_qspi: fix base trigger address & transfer "
` [U-Boot] [RESEND PATCH v4 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity
` [U-Boot] [RESEND PATCH v4 5/5] spi: cadence_qspi: get fifo width from device tree
[U-Boot] [PATCH v2 1/2] arm: socfpga: mmc: Enable calibration for drvsel and smpsel
2015-08-26 5:43 UTC (3+ messages)
[U-Boot] [PATCH v2 0/4] Add UniPhier GPIO driver support
2015-08-26 4:14 UTC (11+ messages)
` [U-Boot] [PATCH v2 1/4] gpio: UniPhier: add driver for UniPhier GPIO controller
` [U-Boot] [PATCH v2 2/4] gpio: do not include <asm/arch/gpio.h> for UniPhier
` [U-Boot] [PATCH v2 3/4] ARM: UniPhier: enable UniPhier GPIO driver
` [U-Boot] [PATCH v2 4/4] ARM: dts: UniPhier: add GPIO controller nodes
[U-Boot] [PATCH 1/3] drivers: kconfig: Move "Generic Driver Options" menu to the top
2015-08-26 4:05 UTC (9+ messages)
` [U-Boot] [PATCH 2/3] drivers: kconfig: Move PHYS_TO_BUS to "Device Drivers" menu
` [U-Boot] [PATCH 3/3] drivers: kconfig: Sort driver menu in alphabetical order
[U-Boot] [PATCH] buildman: Correct 'Series-cover-cc' detection logic
2015-08-26 4:05 UTC (2+ messages)
[U-Boot] [PATCH] exynos: Rise ARM voltage to 1.1V for chained bootloaders
2015-08-26 4:04 UTC (3+ messages)
[U-Boot] Pull request: nand flash master
2015-08-26 3:54 UTC
[U-Boot] [PATCH v3] buildman: Improve the config comparison feature
2015-08-26 3:52 UTC
[U-Boot] [RFC v3 PATCH 0/4] add pinctrl driver framework
2015-08-26 3:06 UTC (7+ messages)
` [U-Boot] [RFC v3 PATCH 2/4] pinctrl: add pin control uclass support
[U-Boot] [PATCH v4 0/3] add pinctrl driver framework
2015-08-26 3:06 UTC (7+ messages)
` [U-Boot] [PATCH v4 1/3] dm: core: allow device_bind() to not return a device pointer
` [U-Boot] [PATCH v4 2/3] pinctrl: add pin control uclass support
` [U-Boot] [PATCH v4 3/3] pinctrl: sandbox: add sandbox pinctrl driver
[U-Boot] [PATCH 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"
2015-08-26 3:06 UTC (24+ messages)
` [U-Boot] [PATCH 3/9] dm: eth: Do not call board_eth_init() or cpu_eth_init()
` [U-Boot] [PATCH 5/9] x86: crownbay: Convert to use CONFIG_DM_USB
` [U-Boot] [PATCH 6/9] x86: crownbay: Convert to use CONFIG_DM_ETH for E1000
` [U-Boot] [PATCH 7/9] net: pch_gbe: Convert to driver model
` [U-Boot] [PATCH 8/9] net: pch_gbe: Add Kconfig option
` [U-Boot] [PATCH 9/9] x86: crownbay: Enable CONFIG_PCH_GBE
[U-Boot] [PATCH 0/3] drivers/sandbox: Introduce a simplified remoteproc framework
2015-08-26 2:26 UTC (5+ messages)
` [U-Boot] [PATCH 1/3] drivers: "
[U-Boot] [PATCH] ARM: rpi: Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support
2015-08-26 1:59 UTC (8+ messages)
` [U-Boot] [PATCH V2] "
[U-Boot] [U-BOOT][PATCH]ARM Fix pandaboard es and a4 revision ID
2015-08-26 0:55 UTC
[U-Boot] [PATCH 1/3] arm: mvebu: Move Armada XP/38x Kconfig to mach specific Kconfig file
2015-08-25 22:30 UTC (3+ messages)
` [U-Boot] [PATCH 2/3] arm: mvebu: Add option to use UART xmodem protocol via kwboot
[U-Boot] [PATCH][v6] imx: system counter driver for imx7d and mx6ul
2015-08-25 22:00 UTC
[U-Boot] [PATCH] imx: arch-mx6: add is_soc_type helper macro
2015-08-25 20:57 UTC (2+ messages)
` [U-Boot] [PATCH v2] thermal: imx_thermal: rework driver to be reused
[U-Boot] [PATCH] imx: arch-mx6: add is_soc_type helper macro
2015-08-25 20:56 UTC
[U-Boot] 2TB disks
2015-08-25 19:24 UTC (2+ messages)
` [U-Boot] [PATCH] Don't wrap to negative after 2G sectors
[U-Boot] [PATCH v4 0/5] spi: cadence_qspi: optimize & fix indirect rd-writes
2015-08-25 19:14 UTC (6+ messages)
` [U-Boot] [PATCH v4 1/5] spi: cadence_qspi: move trigger base configuration in init
` [U-Boot] [PATCH v4 2/5] spi: cadence_qspi: fix indirect read/write start address
` [U-Boot] [PATCH v4 3/5] spi: cadence_qspi: fix base trigger address & transfer "
` [U-Boot] [PATCH v4 4/5] spi: cadence_qspi: rename ahbbase to flashbase for clarity
` [U-Boot] [PATCH v4 5/5] spi: cadence_qspi: get fifo width from device tree
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).