messages from 2015-09-09 15:00:51 to 2015-09-11 10:24:31 UTC [more...]
[U-Boot] [PATCH v4 00/11] x86: quark: Convert to driver model
2015-09-11 10:24 UTC (7+ messages)
` [U-Boot] [PATCH v4 08/11] dm: pci: Add an inline API to test if a device is on a PCI bus
` [U-Boot] [PATCH v4 11/11] x86: quark: Add PCIe/USB static register programming after memory init
[U-Boot] [ANN] U-Boot v2015.10-rc3 released
2015-09-11 9:39 UTC (2+ messages)
[U-Boot] [RFC PATCH 0/2] sunxi: support FEL-provided environment vars and "fel" boot target
2015-09-11 9:31 UTC (7+ messages)
` [U-Boot] [RFC PATCH 1/2] sunxi: retrieve FEL-provided values to environment variables
` [U-Boot] [RFC PATCH 2/2] sunxi: add "fel" boot target
[U-Boot] [PATCH v3 3/5] spi: cadence_qspi: Ensure check for max frequency in place
2015-09-11 8:35 UTC (2+ messages)
[U-Boot] [PATCH] sunxi: (mksunxiboot) signature to indicate "sunxi" SPL variant
2015-09-11 8:17 UTC (3+ messages)
[U-Boot] [PATCH 0/5] RFC: usb: Drop requirement for USB unbinding
2015-09-11 8:14 UTC (7+ messages)
` [U-Boot] [PATCH 4/5] dm: usb: Add support for USB keyboards with driver model
[U-Boot] [PATCH 1/4] mmc: dw_mmc: Stop bounce buffer even in case of failure
2015-09-11 7:59 UTC (3+ messages)
` [U-Boot] [PATCH 2/4] mmc: dw_mmc: Zap endless timeout
[U-Boot] [PULL] u-boot-atmel/master -> u-boot/master
2015-09-11 7:45 UTC
[U-Boot] [PATCH v5 3/3] at91, taurus, smartweb: add dfu support
2015-09-11 7:39 UTC (2+ messages)
` [U-Boot] [U-Boot, v5, "
[U-Boot] [PATCH v5 2/3] usb: gadget: at91_udc: add at91_udc into U-Boot
2015-09-11 7:39 UTC (2+ messages)
` [U-Boot] [U-Boot, v5, "
[U-Boot] [PATCH v5 1/3] usb: gadget: at91_udc: port linux driver at91_udc
2015-09-11 7:39 UTC (2+ messages)
` [U-Boot] [U-Boot, v5, "
[U-Boot] [PATCH] ARM: atmel: boards: use default CONFIG_SYS_PBSIZE
2015-09-11 7:38 UTC (2+ messages)
` [U-Boot] "
[U-Boot] [PATCH 1/1] arm: at91: convert meesc board to generic board
2015-09-11 7:38 UTC (2+ messages)
` [U-Boot] [U-Boot, "
[U-Boot] [PATCH v3] taurus: board updates
2015-09-11 7:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v3] "
[U-Boot] [PATCH v3] arm, at91: add axm extensions
2015-09-11 7:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v3] "
[U-Boot] [PATCH v3 2/2] corvus, dfu: add dfu support
2015-09-11 7:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v3,2/2] "
[U-Boot] [PATCH v3 1/2] at91: corvus: board updates
2015-09-11 7:38 UTC (2+ messages)
` [U-Boot] [U-Boot,v3,1/2] "
[U-Boot] [PATCH 1/4 v2] mtd: nand: fsmc: Add BCH4 SW ECC support for SPEAr600
2015-09-11 6:23 UTC (4+ messages)
` [U-Boot] [PATCH 1/4 v3] "
[U-Boot] [PATCH] dm: core: Enable optional use of fdt_translate_address()
2015-09-11 5:41 UTC (6+ messages)
` [U-Boot] [PATCH v2] "
[U-Boot] [PATCH 1/2] nitrogen6x: Fix the error handling in board_eth_init()
2015-09-11 3:53 UTC (2+ messages)
` [U-Boot] [PATCH 2/2] ot1200: "
[U-Boot] [PATCH 1/5] net: mdio: Add mdio_free() and mdio_unregister() API
2015-09-11 2:54 UTC (18+ messages)
` [U-Boot] [PATCH 2/5] net: designware: Add driver remove support
` [U-Boot] [PATCH 3/5] net: pch_gbe: "
` [U-Boot] [PATCH 4/5] dm: core: Remove the call to device_free()
` [U-Boot] [PATCH 5/5] dm: core: Remove unnecessary codes in uclass_pre_remove_device()
[U-Boot] Please pull u-boot-x86.git
2015-09-11 2:13 UTC (2+ messages)
[U-Boot] [PATCH] arm: at91: clock: Add the generated clock support
2015-09-11 2:01 UTC (3+ messages)
[U-Boot] [PATCH v2 1/3] net: eth: Clear MAC address in eth_pre_remove()
2015-09-11 0:52 UTC (8+ messages)
` [U-Boot] [PATCH v2 2/3] dm: test: Add a new test case against dm eth codes for NULL pointer access
` [U-Boot] [PATCH v2 3/3] net: eth: Check return value in various places
[U-Boot] [PATCH 1/1] net: phy: micrel: add support for KSZ8021RNL & KSZ8031RNL
2015-09-11 0:47 UTC (2+ messages)
[U-Boot] [PATCH v3 5/5] common: Enable fdt_support in SPL build
2015-09-11 0:45 UTC (4+ messages)
[U-Boot] [PATCH v2] pcie_imx: Use 'ms' for milliseconds
2015-09-10 23:55 UTC (2+ messages)
[U-Boot] [PATCH] pcie_imx: Use 'ms' for miliseconds
2015-09-10 23:39 UTC
[U-Boot] commit 620776d causes TFTP error: 'Unsupported option(s) requested' (8)
2015-09-10 22:51 UTC (10+ messages)
[U-Boot] [PATCH] net: eth: Do sanity test on eth dev before eth_get_ops(dev)->start
2015-09-10 22:47 UTC (9+ messages)
[U-Boot] dm eth rotation is broken under some circumstances
2015-09-10 22:27 UTC (2+ messages)
[U-Boot] [PATCH] fat: handle paths that include ../
2015-09-10 22:26 UTC (3+ messages)
[U-Boot] [PATCH v2 0/8] arm: hikey: hi6220: Various fixups
2015-09-10 20:55 UTC (9+ messages)
` [U-Boot] [PATCH v2 1/8] ARM: hikey: Update README with various corrections
` [U-Boot] [PATCH v2 2/8] ARM: hikey: Add ATF makefile referenced by README
` [U-Boot] [PATCH v2 3/8] ARM: hikey: Use linux/sizes.h for malloc size
` [U-Boot] [PATCH v2 4/8] ARM: hi6220: Add UART0 and UART3 base addresses
` [U-Boot] [PATCH v2 5/8] ARM: hikey: Remove resetting gd->flags in board_init()
` [U-Boot] [PATCH v2 6/8] ARM: hikey: Select DM, DM_GPIO from Kconfig
` [U-Boot] [PATCH v2 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and use UART3 by default
` [U-Boot] [PATCH v2 8/8] ARM: hikey: Adjust SDRAM_1_SIZE to 0x3EFFFFFF
[U-Boot] [PATCH v3 2/5] spi: cadence_qspi: Fix fdt read of spi-max-frequency
2015-09-10 20:49 UTC (3+ messages)
[U-Boot] [PATCH 0/8] hikey: hi6220: Various fixups
2015-09-10 20:48 UTC (13+ messages)
` [U-Boot] [PATCH 1/8] ARM: hikey: Update README with various corrections
` [U-Boot] [PATCH 2/8] ARM: hikey: Add ATF makefile referenced by README
` [U-Boot] [PATCH 3/8] ARM: hikey: Use linux/sizes.h for malloc size
` [U-Boot] [PATCH 4/8] ARM: hi6220: Add UART0 and UART3 base addresses
` [U-Boot] [PATCH 5/8] ARM: hikey: Remove resetting gd->flags in board_init()
` [U-Boot] [PATCH 6/8] ARM: hikey: Select DM, DM_GPIO from Kconfig
` [U-Boot] [PATCH 7/8] ARM: hikey: hi6220: Migrate over to DM_SERIAL and UART3 for serial
` [U-Boot] [PATCH 8/8] ARM: hikey: Adjust SDRAM_1_SIZE to 0x3EFFFFFF
[U-Boot] [PATCH v3 1/5] spi: cadence_qspi: Ensure spi_calibration is run when sclk change
2015-09-10 20:48 UTC (3+ messages)
[U-Boot] [PATCH] mx6sabre_common: Add Fastboot support
2015-09-10 19:03 UTC
[U-Boot] [PATCH 00/13] Implement fastboot over NAND
2015-09-10 18:47 UTC (7+ messages)
` [U-Boot] [PATCH 07/13] fastboot: Implement NAND backend
` [U-Boot] [PATCH 12/13] sunxi: A13-Olinuxino: Enable the USB OTG controller
[U-Boot] [PATCH] sunxi: Ensure that 'mksunxiboot' tool produces deterministic output
2015-09-10 18:21 UTC (2+ messages)
[U-Boot] [PATCH] sunxi_nand_spl: Add config parameter for 4KiB page sized NAND devices
2015-09-10 18:19 UTC (2+ messages)
[U-Boot] [PATCH] sunxi: Fix wrong serial console setup in Forfun Q88DB tablet
2015-09-10 18:18 UTC (2+ messages)
[U-Boot] Fastboot is not detected
2015-09-10 13:16 UTC (7+ messages)
[U-Boot] [PATCH 1/2] ARM: tegra124: Clear IDDQ when enabling PLLC
2015-09-10 12:09 UTC (7+ messages)
` [U-Boot] [PATCH 2/2] ARM: tegra114: "
[U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency
2015-09-10 11:41 UTC (8+ messages)
[U-Boot] [PATCH 00/11] imx: mx6: support lcdif
2015-09-10 10:29 UTC (12+ messages)
` [U-Boot] [PATCH 01/11] mxs: add parameter base_addr for mxs_set_lcdclk
` [U-Boot] [PATCH 02/11] sandisk: sfp: correct function name
` [U-Boot] [PATCH 03/11] xfi3: "
` [U-Boot] [PATCH 04/11] imx: imx-common: move lcdif structure and macro definition to imx-common
` [U-Boot] [PATCH 05/11] imx: mx6: fix register address
` [U-Boot] [PATCH 06/11] imx: mx6: crm_reg: add LCDIF related macros
` [U-Boot] [PATCH 07/11] imx: mx6: add clock api for lcdif
` [U-Boot] [PATCH 08/11] imx: mx6ul_14x14_evk: support lcdif display
` [U-Boot] [PATCH 09/11] video: mxsfb: introduce lcdif_power_down
` [U-Boot] [PATCH 10/11] imx: mx6: implement reset_misc
` [U-Boot] [PATCH 11/11] imx: imx-common: power down lcdif before boot os
[U-Boot] [PATCH] zynq-common: Define spi args offset and size
2015-09-10 9:56 UTC
[U-Boot] [PATCH v2 0/8] x86: Support booting Linux kernel on Intel Galileo
2015-09-10 6:20 UTC (9+ messages)
` [U-Boot] [PATCH v2 1/8] x86: galileo: Enable random mac address for Quark
` [U-Boot] [PATCH v2 2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access
` [U-Boot] [PATCH v2 3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros
` [U-Boot] [PATCH v2 4/8] x86: quark: Lock HMBOUND register before jumping to kernel
` [U-Boot] [PATCH v2 5/8] x86: quark: Initialize thermal sensor properly
` [U-Boot] [PATCH v2 6/8] x86: galileo: Add PCIe root port IRQ routing
` [U-Boot] [PATCH v2 7/8] x86: doc: Document some porting hints about Intel Quark
` [U-Boot] [PATCH v2 8/8] x86: doc: Add DMI to the TODO list
[U-Boot] [PATCH v3 4/5] arm: dts: socfpga: Increase the spi-max-frequency for QSPI flash
2015-09-10 5:01 UTC
[U-Boot] [PATCH 3/4] spi: cadence_qspi: Ensure check for max frequency in place
2015-09-10 4:59 UTC (3+ messages)
[U-Boot] [PATCH 0/8] x86: quark: Convert to driver model
2015-09-10 3:58 UTC (4+ messages)
` [U-Boot] [PATCH 3/8] x86: Convert to use driver model pci on quark/galileo
[U-Boot] [PATCH v2 00/11] x86: quark: Convert to driver model
2015-09-10 3:58 UTC (8+ messages)
` [U-Boot] [PATCH v2 09/11] net: designware: Add support to PCI designware devices
[U-Boot] DM: uclass for timer
2015-09-10 3:11 UTC (3+ messages)
[U-Boot] [PATCH v2 0/2] This series adds an ability to use pl01x for early debug output
2015-09-10 2:45 UTC (5+ messages)
` [U-Boot] [PATCH v2 1/2] arm: serial: Add debug UART capability to the pl01x driver
` [U-Boot] [PATCH v2 2/2] arm: serial: Add Kconfig entries to facilitate usage of the pl01x driver for early debug output
[U-Boot] [PATCH] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback
2015-09-09 23:20 UTC (4+ messages)
[U-Boot] [PATCH V2] usb: gadget: ci_udc: implement usb_ep_ops dequeue callback
2015-09-09 23:20 UTC (3+ messages)
[U-Boot] [PATCH] arm: move edb93xx to generic board architecture
2015-09-09 22:40 UTC
[U-Boot] [PATCH v4 0/9] Add support for hi6220 SoC and HiKey 96boards CE board
2015-09-09 21:09 UTC (4+ messages)
` [U-Boot] [PATCH v4 8/9] ARM64: hikey: Add a README for this board
[U-Boot] [PATCH v4 1/4] bitops: introduce BIT() definition
2015-09-09 19:04 UTC (11+ messages)
` [U-Boot] [PATCH v5] "
[U-Boot] [PATCH 1/2] sun4i: Add defconfig and dts for inet9f-rev03 based tablets
2015-09-09 18:34 UTC (4+ messages)
` [U-Boot] [PATCH 2/2] sun4i: Add dts and defconfig for iNet-1 "
[U-Boot] [PATCH] sunxi: Add defconfig and dts for the pov protab2-ips9 tablet
2015-09-09 18:34 UTC (2+ messages)
[U-Boot] [PATCH] sunxi: Add q8_a13_tablet defconfig and dts
2015-09-09 18:33 UTC (2+ messages)
[U-Boot] [PATCH] fdt: add new fdt address parsing functions
2015-09-09 18:08 UTC (3+ messages)
[U-Boot] [PATCH] fs: ext4: fix symlink read function
2015-09-09 18:08 UTC (4+ messages)
[U-Boot] [PATCH 0/8] x86: Support booting Linux kernel on Intel Galileo
2015-09-09 18:08 UTC (17+ messages)
` [U-Boot] [PATCH 1/8] x86: galileo: Enable random mac address for Quark
` [U-Boot] [PATCH 2/8] x86: quark: Add clrbits, setbits, clrsetbits macros for message port access
` [U-Boot] [PATCH 3/8] x86: quark: Convert to use clrbits, setbits, clrsetbits macros
` [U-Boot] [PATCH 4/8] x86: quark: Lock HMBOUND register before jumping to kernel
` [U-Boot] [PATCH 5/8] x86: quark: Initialize thermal sensor properly
` [U-Boot] [PATCH 6/8] x86: galileo: Add PCIe root port IRQ routing
` [U-Boot] [PATCH 7/8] x86: doc: Document some porting hints about Intel Quark
` [U-Boot] [PATCH 8/8] x86: doc: Add DMI to the TODO list
[U-Boot] [PATCH v2] pinctrl: move dm_scan_fdt_node() out of pinctrl uclass
2015-09-09 18:07 UTC (2+ messages)
` [U-Boot] [PATCH] "
[U-Boot] [PATCH 00/13] dm: arm: zynq: Convert serial driver to driver model
2015-09-09 18:07 UTC (15+ messages)
` [U-Boot] [PATCH 11/13] arm: zynq: dts: Add U-Boot device tree additions
[U-Boot] [PATCH v3] common: Fix load and entry addresses in FIT image
2015-09-09 18:07 UTC (2+ messages)
[U-Boot] [PATCH 00/45] arm: Remove boards that have not moved to generic board init
2015-09-09 18:07 UTC (3+ messages)
[U-Boot] [PATCH] RFC: dm: Add proposed timeline and guide for porting serial drivers
2015-09-09 18:06 UTC (4+ messages)
[U-Boot] [PATCH] arm: serial: Add debug UART capability to the pl01x driver
2015-09-09 18:05 UTC (2+ messages)
[U-Boot] [PATCH 01/10] usb: gadget: don't leak configs when unbinding
2015-09-09 16:08 UTC (7+ messages)
` [U-Boot] [PATCH 07/10] ARM: tegra: fix malloc region sizing
[U-Boot] [PATCH 1/4] thermal: imx_thermal: Do not print on error
2015-09-09 15:47 UTC (8+ messages)
` [U-Boot] [PATCH 3/4] mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORT
[U-Boot] [PATCH v2 1/1] gpio: lpc32xx: fix issues with port3 gpio
2015-09-09 15:35 UTC
[U-Boot] [PATCH v4 11/16] common/env_flags.c: Add function to validate a MAC address
2015-09-09 15:00 UTC (2+ messages)
` [U-Boot] [PATCH v4 12/16] drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).