* [ANN] unicorn 5.5.3 - Rack HTTP server for fast clients and *nix
@ 2020-01-31 20:48 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2020-01-31 20:48 UTC (permalink / raw)
To: ruby-talk, unicorn-public
unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between unicorn and slow clients.
Disclaimer:
Due to its ability to tolerate crashes and isolate clients, unicorn
is unfortunately known to prolong the existence of bugs in applications
and libraries which run on top of it.
Consider this just an announcement to inform existing users of a
new version, not something to convince you to switch to something
that set the entire Ruby back decades in terms of concurrency.
.onion URLs below are available for Tor users and can reduce
our operating costs:
* https://yhbt.net/unicorn/
http://unicorn.ou63pmih66umazou.onion/
* public list: unicorn-public@yhbt.net
* mail archives: https://yhbt.net/unicorn-public/
http://ou63pmih66umazou.onion/unicorn-public/
* git clone https://yhbt.net/unicorn.git
torsocks git clone http://ou63pmih66umazou.onion/unicorn.git
* https://yhbt.net/unicorn/NEWS.atom.xml
http://unicorn.ou63pmih66umazou.onion/NEWS.atom.xml
* nntp://news.public-inbox.org/inbox.comp.lang.ruby.unicorn
nntp://ou63pmih66umazou.onion/inbox.comp.lang.ruby.unicorn
Changes:
unicorn 5.5.3
Documentation updates to switch bogomips.org to yhbt.net since
the .org TLD won't be affordable in the near future.
There's also a few minor test cleanups.
80x24.org and public-inbox.org will be dead on expiry, too;
but I don't think I'll be around to care by then.
^ permalink raw reply [relevance 4%]
* [ANN] unicorn 5.5.2 - Rack HTTP server for fast clients and *nix
@ 2019-12-20 2:15 3% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2019-12-20 2:15 UTC (permalink / raw)
To: ruby-talk, unicorn-public; +Cc: Terry Scheingeld
unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between unicorn and slow clients.
Disclaimer:
Due to its ability to tolerate crashes and isolate clients, unicorn
is unfortunately known to prolong the existence of bugs in applications
and libraries which run on top of it.
Consider this just an announcement to inform existing users of a
new version, not something to convince you to switch to something
that set the entire Ruby back decades in terms of concurrency.
* https://bogomips.org/unicorn/
* public list: unicorn-public@bogomips.org
* mail archives: https://bogomips.org/unicorn-public/
* git clone https://bogomips.org/unicorn.git
* https://bogomips.org/unicorn/NEWS.atom.xml
* nntp://news.public-inbox.org/inbox.comp.lang.ruby.unicorn
Changes:
Thanks to Terry Scheingeld, we now workaround a Ruby bug
and can now run with taint checks enabled:
<https://bugs.ruby-lang.org/issues/14485>
<https://bogomips.org/unicorn-public/CABg1sXrvGv9G6CDQxePDUqTe6N-5UpLXm7eG3YQO=dda-Cgg7A@mail.gmail.com/>
There's also a few documentation updates and building packages
from source is easier since pandoc is no longer a dependency
(and I can no longer afford the bandwidth or space to install
it).
Eric Wong (7):
test/benchmark/ddstream: demo for slowly reading clients
test/benchmark/readinput: demo for slowly uploading clients
test/benchmark/uconnect: test for accept loop speed
examples/unicorn@.service: note the NonBlocking flag
Merge remote-tracking branch 'origin/ts/tmpio'
test_util: get rid of some unused variables in tests
doc: replace pandoc-"Markdown" with real manpages
Terry Scheingeld (1):
tmpio: workaround File#path being tainted on unlink
havpbea: orngvat n qrnq ubefr hagvy gur fgvpx trgf fghpx va vg'f fxhyy
^ permalink raw reply [relevance 3%]
* [ANN] unicorn 5.4.0 - Rack HTTP server for fast clients and Unix
@ 2017-12-23 23:42 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2017-12-23 23:42 UTC (permalink / raw)
To: ruby-talk, unicorn-public; +Cc: James P Robinson Jr, Sam Saffron
unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between unicorn and slow clients.
* https://bogomips.org/unicorn/
* public list: unicorn-public@bogomips.org
* mail archives: https://bogomips.org/unicorn-public/
* git clone git://bogomips.org/unicorn.git
* https://bogomips.org/unicorn/NEWS.atom.xml
* nntp://news.public-inbox.org/inbox.comp.lang.ruby.unicorn
Changes:
Rack hijack support improves as the app code can capture and use
the Rack `env' privately without copying it (to avoid clobbering
by another client). Thanks to Sam Saffron for reporting and
testing this new feature:
https://bogomips.org/unicorn-public/CAAtdryPG3nLuyo0jxfYW1YHu1Q+ZpkLkd4KdWC8vA46B5haZxw@mail.gmail.com/T/
We also now support $DEBUG being set by the Rack app (instead of
relying on the "-d" CLI switch). Thanks to James P Robinson Jr
for reporting this bug:
https://bogomips.org/unicorn-public/D6324CB4.7BC3E%25james.robinson3@cigna.com/T/
(Coincidentally, this fix will be irrelevant for Ruby 2.5
which requires 'pp' by default)
There's a few minor test cleanups and documentation updates, too.
All commits since v5.3.1 (2017-10-03):
reduce method calls with String#start_with?
require 'pp' if $DEBUG is set by Rack app
avoid reusing env on hijack
tests: cleanup some unused variable warnings
ISSUES: add a note about Debian BTS interopability
Roughly all mailing discussions since the last release:
https://bogomips.org/unicorn-public/?q=d:20171004..20171223
^ permalink raw reply [relevance 4%]
* [ANN] unicorn 5.1.0 - Rack HTTP server for fast clients and *nix
@ 2016-04-01 0:43 3% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2016-04-01 0:43 UTC (permalink / raw)
To: ruby-talk, unicorn-public; +Cc: Adam Duke, Aaron Patterson
Unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between unicorn and slow clients.
* http://unicorn.bogomips.org/
* public list: unicorn-public@bogomips.org
* mail archives: http://bogomips.org/unicorn-public/
* git clone git://bogomips.org/unicorn.git
* http://unicorn.bogomips.org/NEWS.atom.xml
* nntp://news.public-inbox.org/inbox.comp.lang.ruby.unicorn
Changes:
unicorn 5.1.0 - rack is optional, again
Note: no code changes since 5.1.0.pre1 from January.^WNo, wait,
last minute performance improvement added today. See below.
The big change is rack is not required (but still recommended).
Applications are expected to depend on rack on their own so they can
specify the version of rack they prefer without unicorn pulling
in a newer, potentially incompatible version.
unicorn will always attempt to work with multiple versions of rack
as practical.
The HTTP parser also switched to using the TypedData C-API for
extra type safety and memory usage accounting support in the
'objspace' extension.
Thanks to Adam Duke to bringing the rack change to our attention
and Aaron Patterson for helping with the matter.
Last minute change: we now support the new leftpad() syscall under
Linux for major performance and security improvements:
http://mid.gmane.org/1459463613-32473-1-git-send-email-richard@nod.at
8^H9 changes since 5.0.1:
http: TypedData C-API conversion
various documentation updates
doc: bump olddoc to ~> 1.2 for extra NNTP URL
rack is optional at runtime, required for dev
doc update for ClientShutdown exceptions class
unicorn 5.1.0.pre1 - rack is optional, again
doc: reference --keep-file-descriptors for "bundle exec"
doc: further trimming to reduce noise
use leftpad Linux syscall for speed!
^ permalink raw reply [relevance 3%]
* [ANN] unicorn 5.1.0.pre1 - Rack HTTP server for fast clients and *nix
@ 2016-01-27 23:16 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2016-01-27 23:16 UTC (permalink / raw)
To: ruby-talk, unicorn-public
Unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between unicorn and slow clients.
* http://unicorn.bogomips.org/
* public list: unicorn-public@bogomips.org
* mail archives: http://bogomips.org/unicorn-public/
* git clone git://bogomips.org/unicorn.git
* http://unicorn.bogomips.org/NEWS.atom.xml
* nntp://news.public-inbox.org/inbox.comp.lang.ruby.unicorn
This is a pre-release, you will need to specify the version to
install explicitly when using RubyGems.
Changes:
unicorn 5.1.0.pre1 - rack is optional, again
The big change is rack is not required (but still recommended).
Applications are expected to depend on rack on their own so they can
specify the version of rack they prefer without unicorn pulling
in a newer, potentially incompatible version.
unicorn will always attempt to work with multiple versions of rack
as practical.
The HTTP parser also switched to using the TypedData C-API for
extra type safety and memory usage accounting support in the
'objspace' extension.
Thanks to Adam Duke to bringing the rack change to our attention
and Aaron Patterson for helping with the matter.
There might be more documentation-related changes before 5.1.0
final. I am considering dropping pandoc from manpage generation
and relying on pod2man (from Perl) because it has a wider install
base.
5 changes since v5.0.1:
http: TypedData C-API conversion
various documentation updates
doc: bump olddoc to ~> 1.2 for extra NNTP URL
rack is optional at runtime, required for dev
doc update for ClientShutdown exceptions class
^ permalink raw reply [relevance 4%]
* [PUSHED] various documentation updates
@ 2016-01-07 3:41 3% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2016-01-07 3:41 UTC (permalink / raw)
To: unicorn-public
* add nntp_url to the olddoc website footer
* update legacy support status for 4.x (not 4.8.x)
* update copyright range to 2016
* note all of our development tools are Free Software, too
* remove cgit mention; it may not always be cgit
(but URLs should remain compatible).
* discourage downloading snapshot tarballs;
"git clone" + periodic "git fetch" is more efficient
* remove most mentions of unicorn_rails as that
was meant for ancient Rails 1.x/2.x users
* update path reference to Ruby 2.3.0
* fix nginx upstream module link to avoid redirect
* shorten Message-ID example to avoid redirects
and inadvertant linkage
---
Also pushed to the website http://unicorn.bogomips.org/
(using olddoc.git @ c98abe82b6b3 from git://80x24.org/olddoc.git)
Curious, does anybody out there use Rails 2.x or earlier?
.olddoc.yml | 1 +
Documentation/unicorn.1.txt | 1 -
Documentation/unicorn_rails.1.txt | 2 +-
HACKING | 2 +-
README | 17 +++++------------
lib/unicorn/configurator.rb | 5 +++--
lib/unicorn/http_server.rb | 4 ++--
7 files changed, 13 insertions(+), 19 deletions(-)
diff --git a/.olddoc.yml b/.olddoc.yml
index 063c1c6..cda8ac3 100644
--- a/.olddoc.yml
+++ b/.olddoc.yml
@@ -13,3 +13,4 @@ noindex:
- unicorn_rails_1
public_email: unicorn-public@bogomips.org
private_email: unicorn@bogomips.org
+nntp_url: nntp://news.public-inbox.org/inbox.comp.lang.ruby.unicorn
diff --git a/Documentation/unicorn.1.txt b/Documentation/unicorn.1.txt
index efdda4b..3f20a9a 100644
--- a/Documentation/unicorn.1.txt
+++ b/Documentation/unicorn.1.txt
@@ -175,7 +175,6 @@ the unicorn config file.
# SEE ALSO
-* unicorn_rails(1)
* *Rack::Builder* ri/RDoc
* *Unicorn::Configurator* ri/RDoc
* [Unicorn RDoc][1]
diff --git a/Documentation/unicorn_rails.1.txt b/Documentation/unicorn_rails.1.txt
index bff703e..2ce7501 100644
--- a/Documentation/unicorn_rails.1.txt
+++ b/Documentation/unicorn_rails.1.txt
@@ -4,7 +4,7 @@
# NAME
-unicorn_rails - a script/server-like command to launch the Unicorn HTTP server
+unicorn_rails - unicorn launcher for Rails 1.x and 2.x users
# SYNOPSIS
diff --git a/HACKING b/HACKING
index 6c5f897..0fa22cd 100644
--- a/HACKING
+++ b/HACKING
@@ -57,7 +57,7 @@ Please wrap documentation at 72 characters-per-line or less (long URLs
are exempt) so it is comfortably readable from terminals.
When referencing mailing list posts, use
-"http://bogomips.org/unicorn-public/m/$MESSAGE_ID.html" if possible
+<tt>http://bogomips.org/unicorn-public/$MESSAGE_ID/</tt> if possible
since the Message-ID remains searchable even if a particular site
becomes unavailable.
diff --git a/README b/README
index db9f0d4..11de938 100644
--- a/README
+++ b/README
@@ -13,7 +13,7 @@ both the the request and response in between unicorn and slow clients.
{nginx}[http://nginx.org/] or {Rack}[http://rack.github.io/].
* Compatible with Ruby 1.9.3 and later.
- unicorn 4.8.x will remain supported for Ruby 1.8 users.
+ unicorn 4.x remains supported for Ruby 1.8 users.
* Process management: unicorn will reap and restart workers that
die from broken apps. There is no need to manage multiple processes
@@ -60,7 +60,7 @@ both the the request and response in between unicorn and slow clients.
== License
-unicorn is copyright 2009 by all contributors (see logs in git).
+unicorn is copyright 2009-2016 by all contributors (see logs in git).
It is based on Mongrel 1.1.5.
Mongrel is copyright 2007 Zed A. Shaw and contributors.
@@ -68,7 +68,7 @@ unicorn is licensed under (your choice) of the GPLv2 or later
(GPLv3+ preferred), or Ruby (1.8)-specific terms.
See the included LICENSE file for details.
-unicorn is 100% Free Software.
+unicorn is 100% Free Software (including all development tools used).
== Install
@@ -85,10 +85,9 @@ You can get the latest source via git from the following locations
git://bogomips.org/unicorn.git
git://repo.or.cz/unicorn.git (mirror)
-You may browse the code from the web and download the latest snapshot
-tarballs here:
+You may browse the code from the web:
-* http://bogomips.org/unicorn.git (cgit)
+* http://bogomips.org/unicorn.git
* http://repo.or.cz/w/unicorn.git (gitweb)
See the HACKING guide on how to contribute and build prerelease gems
@@ -102,12 +101,6 @@ In APP_ROOT, run:
unicorn
-=== Ancient Rails 1.2 - 2.x versions
-
-In RAILS_ROOT, run:
-
- unicorn_rails
-
unicorn will bind to all interfaces on TCP port 8080 by default.
You may use the +--listen/-l+ switch to bind to a different
address:port or a UNIX socket.
diff --git a/lib/unicorn/configurator.rb b/lib/unicorn/configurator.rb
index 4da19bb..948c6e3 100644
--- a/lib/unicorn/configurator.rb
+++ b/lib/unicorn/configurator.rb
@@ -181,8 +181,6 @@ def before_exec(*args, &block)
# to have nginx always retry backends that may have had workers
# SIGKILL-ed due to timeouts.
#
- # # See http://wiki.nginx.org/NginxHttpUpstreamModule for more details
- # # on nginx upstream configuration:
# upstream unicorn_backend {
# # for UNIX domain socket setups:
# server unix:/path/to/.unicorn.sock fail_timeout=0;
@@ -192,6 +190,9 @@ def before_exec(*args, &block)
# server 192.168.0.8:8080 fail_timeout=0;
# server 192.168.0.9:8080 fail_timeout=0;
# }
+ #
+ # See http://nginx.org/en/docs/http/ngx_http_upstream_module.html
+ # for more details on nginx upstream configuration.
def timeout(seconds)
set_int(:timeout, seconds, 3)
# POSIX says 31 days is the smallest allowed maximum timeout for select()
diff --git a/lib/unicorn/http_server.rb b/lib/unicorn/http_server.rb
index ca56ed3..741cca5 100644
--- a/lib/unicorn/http_server.rb
+++ b/lib/unicorn/http_server.rb
@@ -36,7 +36,7 @@ class Unicorn::HttpServer
# or even different installations of the same applications without
# downtime. Keys of this constant Hash are described as follows:
#
- # * 0 - the path to the unicorn/unicorn_rails executable
+ # * 0 - the path to the unicorn executable
# * :argv - a deep copy of the ARGV array the executable originally saw
# * :cwd - the working directory of the application, this is where
# you originally started Unicorn.
@@ -45,7 +45,7 @@ class Unicorn::HttpServer
# you can set the following in your Unicorn config file, HUP and then
# continue with the traditional USR2 + QUIT upgrade steps:
#
- # Unicorn::HttpServer::START_CTX[0] = "/home/bofh/2.2.0/bin/unicorn"
+ # Unicorn::HttpServer::START_CTX[0] = "/home/bofh/2.3.0/bin/unicorn"
START_CTX = {
:argv => ARGV.map(&:dup),
0 => $0.dup,
--
EW
^ permalink raw reply related [relevance 3%]
* [ANN] unicorn 4.6.3 - fix --no-default-middleware option
@ 2013-06-21 8:14 5% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2013-06-21 8:14 UTC (permalink / raw)
To: mongrel-unicorn
Changes:
Thanks to Micah Chalmer for this fix. There are also minor
documentation updates and internal cleanups.
Eric Wong (4):
doc: update documentation for systemd + PrivateTmp users
test_signals: increase delay between Process.kill
HttpParser#next? becomes response_start_sent-aware
unicorn 4.6.3 - fix --no-default-middleware option
Micah Chalmer (1):
Make -N/--no-default-middleware option work
* http://unicorn.bogomips.org/
* mongrel-unicorn@rubyforge.org
* git://bogomips.org/unicorn.git
* http://unicorn.bogomips.org/NEWS.atom.xml
/me yawns
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 5%]
* Re: [raindrops] testers on 32-bit FreeBSD wanted
@ 2012-05-12 6:05 4% ` Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2012-05-12 6:05 UTC (permalink / raw)
To: mongrel-unicorn
Eric Wong <normalperson@yhbt.net> wrote:
> Since unicorn users are raindrops users, I'd appreciate it if
> 32-bit FreeBSD users can give this a try. Thanks!
I've tested on a i386 FreeBSD 9.0 install I made and seems fine.
Not sure about FreeBSD 7.0, though, but that's pretty ancient...
Anyways, raindrops 0.8.1 is out.
Changes:
This release fixes a build problem found under a current SmartOS. This
release also runs successfully on FreeBSD 9.0 under both x86-64 and
i386.
There are also documentation updates from Aman Gupta and a test suite
fix from Jeremy Evans for OpenBSD.
raindrops fully supports unicorn on recent versions of FreeBSD, OpenBSD,
SmartOS, and possibly other Free Software systems. Portability reports
and fixes for Free Software systems is greatly appreciated at
raindrops@librelist.org
Non-Free systems will never be supported.
raindrops requires the Linux 2.6.18 or later for full functionality
(which unicorn does not require). Future releases will take advantage
of the unix_diag functionality found in the Linux 3.3 (and later)
kernels.
* http://raindrops.bogomips.org/
* raindrops@librelist.org
* git://bogomips.org/raindrops.git
* http://raindrops.bogomips.org/NEWS.atom.xml
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 4%]
* [ANN] unicorn 3.6.2 (and 1.1.7) - fix Unicorn::OobGC module
@ 2011-04-30 6:45 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2011-04-30 6:45 UTC (permalink / raw)
To: mongrel-unicorn
Changes:
The optional Unicorn::OobGC module is reimplemented to fix
breakage that appeared in v3.3.1. There are also minor
documentation updates, but no code changes as of 3.6.1 for
non-OobGC users.
There is also a v1.1.7 release to fix the same OobGC breakage
that appeared for 1.1.x users in the v1.1.6 release.
* http://unicorn.bogomips.org/
* mongrel-unicorn@rubyforge.org
* git://bogomips.org/unicorn.git
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 4%]
* Re: [RFC/PATCH] Bundler/Sandbox documentation updates
2011-03-10 3:30 7% ` Lawrence Pit
@ 2011-03-10 21:29 6% ` Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2011-03-10 21:29 UTC (permalink / raw)
To: unicorn list
Lawrence Pit <lawrence.pit@gmail.com> wrote:
> Eric Wong <normalperson@yhbt.net> wrote:
>> I've tried this a few times, and everytime I get something like this:
>>> https://gist.github.com/331b0decab62fd58483c
>> Yikes, it looks like the UNICORN_FD env is getting clobbered somehow.
>> Not sure what could be causing that.
>>
>>> If I revert back to setting the GEM_HOME, GEM_PATH and PATH in the
>>> before_exec it works fine.
> > Which Bundler version is this with?
>
> Bundler 1.0.10
Odd, I actually used this in my Rainbows! config file to switch an
Isolate deploy to Bundler (1.0.10) yesterday. Everything for Rainbows!
applies to Unicorn, too).
# switching from Isolate to Bundler:
if ENV["GEM_HOME"] =~ %r{/isolate/}
ENV.delete "GEM_HOME"
ENV.delete "GEM_PATH"
# don't need anything else in $PATH for a web server
ENV["PATH"] = "/home/ew/ruby-1.9.2/bin"
# START_CTX is considered a stable interface in Unicorn
start_ctx = Unicorn::HttpServer::START_CTX
start_ctx[0] = "bundle"
# it's even possible to use USR2 to switch between Unicorn and
# Rainbows! without any downtime :)
start_ctx[:argv] = %w(exec rainbows).concat(start_ctx[:argv])
end
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 6%]
* Re: [RFC/PATCH] Bundler/Sandbox documentation updates
2011-03-10 0:52 7% ` Eric Wong
@ 2011-03-10 3:30 7% ` Lawrence Pit
2011-03-10 21:29 6% ` Eric Wong
0 siblings, 1 reply; 23+ results
From: Lawrence Pit @ 2011-03-10 3:30 UTC (permalink / raw)
To: unicorn list
> Which Bundler version is this with?
Bundler 1.0.10
Cheers,
Lawrence
> I've tried this a few times, and everytime I get something like this:
>> https://gist.github.com/331b0decab62fd58483c
> Yikes, it looks like the UNICORN_FD env is getting clobbered somehow.
> Not sure what could be causing that.
>
>> If I revert back to setting the GEM_HOME, GEM_PATH and PATH in the
>> before_exec it works fine.
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 7%]
* Re: [RFC/PATCH] Bundler/Sandbox documentation updates
2011-03-09 10:39 6% ` Lawrence Pit
@ 2011-03-10 0:52 7% ` Eric Wong
2011-03-10 3:30 7% ` Lawrence Pit
0 siblings, 1 reply; 23+ results
From: Eric Wong @ 2011-03-10 0:52 UTC (permalink / raw)
To: unicorn list
Lawrence Pit <lawrence.pit@gmail.com> wrote:
> Hi Eric,
>
> I tested this out:
Thanks for taking your time to test.
> - in the before_exec and after_fork I log PATH GEM_HOME GEM_PATH
> BUNDLE_GEMFILE for inspection after deployment
>
> - deploy latest release, make sure to shutdown unicorn, then start cleanly
>
> - prune all releases, except the last one
>
> - deploy latest release again (which only sets the BUNDLE_GEMFILE env var)
>
> I've tried this a few times, and everytime I get something like this:
>
> https://gist.github.com/331b0decab62fd58483c
Yikes, it looks like the UNICORN_FD env is getting clobbered somehow.
Not sure what could be causing that.
> If I revert back to setting the GEM_HOME, GEM_PATH and PATH in the
> before_exec it works fine.
Which Bundler version is this with?
> PS. When deploying I use USR2 followed by QUIT
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 7%]
* Re: [RFC/PATCH] Bundler/Sandbox documentation updates
2011-03-08 14:22 7% ` Justin Giancola
@ 2011-03-10 0:49 7% ` Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2011-03-10 0:49 UTC (permalink / raw)
To: unicorn list
Justin Giancola <justin.giancola@gmail.com> wrote:
> Setting BUNDLE_GEMFILE in the before_exec hook is the only
> Bundler-related Unicorn config I've needed for Bundler >= 1.0.3
Thanks, that seems to match my observations, too.
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 7%]
* Re: [RFC/PATCH] Bundler/Sandbox documentation updates
2011-03-08 4:40 6% [RFC/PATCH] Bundler/Sandbox documentation updates Eric Wong
2011-03-08 14:22 7% ` Justin Giancola
@ 2011-03-09 10:39 6% ` Lawrence Pit
2011-03-10 0:52 7% ` Eric Wong
1 sibling, 1 reply; 23+ results
From: Lawrence Pit @ 2011-03-09 10:39 UTC (permalink / raw)
To: unicorn list
Hi Eric,
I tested this out:
- in the before_exec and after_fork I log PATH GEM_HOME GEM_PATH
BUNDLE_GEMFILE for inspection after deployment
- deploy latest release, make sure to shutdown unicorn, then start cleanly
- prune all releases, except the last one
- deploy latest release again (which only sets the BUNDLE_GEMFILE env var)
I've tried this a few times, and everytime I get something like this:
https://gist.github.com/331b0decab62fd58483c
If I revert back to setting the GEM_HOME, GEM_PATH and PATH in the
before_exec it works fine.
PS. When deploying I use USR2 followed by QUIT
Cheers,
Lawrence
> I started playing around with Bundler 1.0.10 today and noticed it's
> quite different than previous versions (based on my limited experiences)
> and the out-of-the-box experience is pretty good regarding (lack of)
> ENV pollution.
>
> Can any more experienced Bundler (and possibly Capistrano) users
> comment on the below changes and see if they make sense?
>
> Thanks in advance!
>
> diff --git a/Sandbox b/Sandbox
> index d101106..46dfb91 100644
> --- a/Sandbox
> +++ b/Sandbox
> @@ -45,11 +45,20 @@ This is no longer be an issue as of bundler 0.9.17
>
> ref: http://mid.gmane.org/8FC34B23-5994-41CC-B5AF-7198EF06909E@tramchase.com
>
> +=== BUNDLE_GEMFILE for Capistrano users
> +
> +You may need to set or reset the BUNDLE_GEMFILE environment variable in
> +the before_exec hook:
> +
> + before_exec do |server|
> + ENV["BUNDLE_GEMFILE"] = "/path/to/app/current/Gemfile"
> + end
> +
> === Other ENV pollution issues
>
> -You may need to set or reset BUNDLE_GEMFILE, GEM_HOME, GEM_PATH and PATH
> -environment variables in the before_exec hook as illustrated by
> -http://gist.github.com/534668
> +If you're using an older Bundler version (0.9.x), you may need to set or
> +reset GEM_HOME, GEM_PATH and PATH environment variables in the
> +before_exec hook as illustrated by http://gist.github.com/534668
>
> == Isolate
>
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 6%]
* Re: [RFC/PATCH] Bundler/Sandbox documentation updates
2011-03-08 4:40 6% [RFC/PATCH] Bundler/Sandbox documentation updates Eric Wong
@ 2011-03-08 14:22 7% ` Justin Giancola
2011-03-10 0:49 7% ` Eric Wong
2011-03-09 10:39 6% ` Lawrence Pit
1 sibling, 1 reply; 23+ results
From: Justin Giancola @ 2011-03-08 14:22 UTC (permalink / raw)
To: unicorn list
Setting BUNDLE_GEMFILE in the before_exec hook is the only
Bundler-related Unicorn config I've needed for Bundler >= 1.0.3
For <= 1.0.2 not even this was necessary because the template
executables Bundler generates didn't fully resolve the BUNDLE_GEMFILE
path until 1.0.3
Justin
On Mon, Mar 7, 2011 at 11:40 PM, Eric Wong <normalperson@yhbt.net> wrote:
> I started playing around with Bundler 1.0.10 today and noticed it's
> quite different than previous versions (based on my limited experiences)
> and the out-of-the-box experience is pretty good regarding (lack of)
> ENV pollution.
>
> Can any more experienced Bundler (and possibly Capistrano) users
> comment on the below changes and see if they make sense?
>
> Thanks in advance!
>
> diff --git a/Sandbox b/Sandbox
> index d101106..46dfb91 100644
> --- a/Sandbox
> +++ b/Sandbox
> @@ -45,11 +45,20 @@ This is no longer be an issue as of bundler 0.9.17
>
> ref: http://mid.gmane.org/8FC34B23-5994-41CC-B5AF-7198EF06909E@tramchase.com
>
> +=== BUNDLE_GEMFILE for Capistrano users
> +
> +You may need to set or reset the BUNDLE_GEMFILE environment variable in
> +the before_exec hook:
> +
> + before_exec do |server|
> + ENV["BUNDLE_GEMFILE"] = "/path/to/app/current/Gemfile"
> + end
> +
> === Other ENV pollution issues
>
> -You may need to set or reset BUNDLE_GEMFILE, GEM_HOME, GEM_PATH and PATH
> -environment variables in the before_exec hook as illustrated by
> -http://gist.github.com/534668
> +If you're using an older Bundler version (0.9.x), you may need to set or
> +reset GEM_HOME, GEM_PATH and PATH environment variables in the
> +before_exec hook as illustrated by http://gist.github.com/534668
>
> == Isolate
>
> --
> Eric Wong
> _______________________________________________
> Unicorn mailing list - mongrel-unicorn@rubyforge.org
> http://rubyforge.org/mailman/listinfo/mongrel-unicorn
> Do not quote signatures (like this one) or top post when replying
>
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 7%]
* [RFC/PATCH] Bundler/Sandbox documentation updates
@ 2011-03-08 4:40 6% Eric Wong
2011-03-08 14:22 7% ` Justin Giancola
2011-03-09 10:39 6% ` Lawrence Pit
0 siblings, 2 replies; 23+ results
From: Eric Wong @ 2011-03-08 4:40 UTC (permalink / raw)
To: mongrel-unicorn
I started playing around with Bundler 1.0.10 today and noticed it's
quite different than previous versions (based on my limited experiences)
and the out-of-the-box experience is pretty good regarding (lack of)
ENV pollution.
Can any more experienced Bundler (and possibly Capistrano) users
comment on the below changes and see if they make sense?
Thanks in advance!
diff --git a/Sandbox b/Sandbox
index d101106..46dfb91 100644
--- a/Sandbox
+++ b/Sandbox
@@ -45,11 +45,20 @@ This is no longer be an issue as of bundler 0.9.17
ref: http://mid.gmane.org/8FC34B23-5994-41CC-B5AF-7198EF06909E@tramchase.com
+=== BUNDLE_GEMFILE for Capistrano users
+
+You may need to set or reset the BUNDLE_GEMFILE environment variable in
+the before_exec hook:
+
+ before_exec do |server|
+ ENV["BUNDLE_GEMFILE"] = "/path/to/app/current/Gemfile"
+ end
+
=== Other ENV pollution issues
-You may need to set or reset BUNDLE_GEMFILE, GEM_HOME, GEM_PATH and PATH
-environment variables in the before_exec hook as illustrated by
-http://gist.github.com/534668
+If you're using an older Bundler version (0.9.x), you may need to set or
+reset GEM_HOME, GEM_PATH and PATH environment variables in the
+before_exec hook as illustrated by http://gist.github.com/534668
== Isolate
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply related [relevance 6%]
* [ANN] unicorn 1.1.0 - small changes and cleanups
@ 2010-07-08 8:04 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2010-07-08 8:04 UTC (permalink / raw)
To: unicorn list
Unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between Unicorn and slow clients.
* http://unicorn.bogomips.org/
* mongrel-unicorn@rubyforge.org
* git://git.bogomips.org/unicorn.git
Changes:
This is a small, incremental feature release with some internal
changes to better support upcoming versions of the Rainbows! and
Zbatery web servers. There is no need to upgrade if you're
happy with 1.0.0, but also little danger in upgrading.
There is one pedantic bugfix which shouldn't affect anyone
and small documentation updates as well.
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 4%]
* anything left before 1.0?
@ 2010-06-16 0:09 5% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2010-06-16 0:09 UTC (permalink / raw)
To: mongrel-unicorn
Hi all,
Since some folks have been running Unicorn in production for a while,
we might as well call the next release 1.0.
I have a couple of minor fixes in unicorn.git on top of 0.991.0.
Mainly, there are small compatibility fixes for the future (MRI 1.9.2
and Rubinius) and the past (MRI 1.8.6(!)).
There are also some documentation updates for Rack 1.2, but we should be
compatible with everything from Rack 0.9 (possibly earlier) to the
latest Rack 1.2.
Shortlog since 0.991.0:
Eric Wong (8):
doc: cleanup rdoc escaping in title, hopefully
cleanup: use modules were applicable
t0005: Ruby 1.9.2 $LOAD_PATH fix
http: fix rb_str_set_len() define for 1.8.6
app/exec_cgi: rack.input may not respond to #size
local.mk.sample: add 1.8.6-p114 to "full-test"
tee_input: update documentation for Rack 1.2
FAQ: help folks help themselves for processes dying in a loop
Let us know if there's anything else missing, pipe up within the next 24
hours or so...
You can always email me privately if you don't want your address on the
public mailing list. Don't send HTML mail, though.
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 5%]
* [ANN] unicorn 0.95.3 - userinfo in absoluteURIs
@ 2009-12-21 22:21 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2009-12-21 22:21 UTC (permalink / raw)
To: mongrel-unicorn, ruby-talk
Unicorn is an HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between Unicorn and slow clients.
* http://unicorn.bogomips.org/
* mongrel-unicorn@rubyforge.org
* git://git.bogomips.org/unicorn.git
Changes:
The HTTP parser now allows (but does not parse) the userinfo
component in the very rare requests that send absoluteURIs.
Thanks to Scott Chacon for reporting and submitting a test case
for this fix.
There are also minor documentation updates and tiny cleanups.
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 4%]
* Re: Usernames in the http_URL
@ 2009-12-19 10:04 4% ` Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2009-12-19 10:04 UTC (permalink / raw)
To: unicorn list
John-Paul Bader <hukl@berlin.ccc.de> wrote:
> Hey guys,
>
> I think the <resource_type>://<username>:<password>@<host>/<path>
> scheme is not "illegal". There are examples of this in the URL RFC,
> just no explicit HTTP example.
>
> This probably a vague area. Its not in the http rfc and its not
> explicitly mentioned in the http auth rfc either but in combination
> with the URL RFC there is at least room for it. I haven't found the
> paragraph yet which says: no username:password stuff allowed in http
> urls. But I was just searching through these things … there are good
> chances I missed it.
Hi,
Yes, I've come to the same conclusion. rfc2616 just seems to defer
to rfc2396 (which superceded rfc1738 and is superceded by rfc3986).
> http://en.wikipedia.org/wiki/URI_scheme
> http://tools.ietf.org/html/rfc2617
> http://www.ietf.org/rfc/rfc1738.txt
>
> Anyway, I came across such urls a lot. Often I use them for giving
> people easy access to an otherwise basic authed resource - in a chat
> conversation for example. I know apache and nginx support this - IIS
> does not.
>
> Hrm - tough call ;)
Yup, definitely precedence for supporting it (along with Mongrel). I've
updated the Ragel parser with everything URI.parse("http://..") supports
and pushed out the change.
I've been meaning to make a few more small documentation updates and do
a 0.95.3 release tomorrow when I'm more awake.
--
Eric Wong
_______________________________________________
Unicorn mailing list - mongrel-unicorn@rubyforge.org
http://rubyforge.org/mailman/listinfo/mongrel-unicorn
Do not quote signatures (like this one) or top post when replying
^ permalink raw reply [relevance 4%]
* [ANN] unicorn 0.95.0 - we <3 Rainbows! and ponies too
@ 2009-11-15 22:34 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2009-11-15 22:34 UTC (permalink / raw)
To: ruby-talk ML, mongrel-unicorn; +Cc: ruby-talk
Unicorn is a HTTP server for Rack applications designed to only serve
fast clients on low-latency, high-bandwidth connections and take
advantage of features in Unix/Unix-like kernels. Slow clients should
only be served by placing a reverse proxy capable of fully buffering
both the the request and response in between Unicorn and slow clients.
* http://unicorn.bogomips.org/
* mongrel-unicorn@rubyforge.org
* git://git.bogomips.org/unicorn.git
Changes:
Mostly internal cleanups and documentation updates. Irrelevant
stacktraces from client disconnects/errors while reading
"rack.input" are now cleared to avoid unnecessary noise. If
user switching in workers is used, ownership of logs is now
preserved when reopening worker logs (send USR1 only to the the
master in this case). The timeout config no longer affects long
after_fork hooks or application startups.
New features include the addition of the :umask option for the
"listen" config directive and error reporting for non-portable
socket options.
No ponies have ever been harmed in our development.
Eric Wong (28):
unicorn.1: document RACK_ENV changes in 0.94.0
HACKING: update with "gmake" in examples
don't nuke children for long after_fork and app loads
local.mk.sample: steal some updates from Rainbows!
Load Unicorn constants when building app
tee_input: fix RDoc argument definition for tee
Add FAQ
FAQ: fix links to Configurator docs
tee_input: better premature disconnect handling
tee_input: don't shadow struct members
raise Unicorn::ClientShutdown if client aborts in TeeInput
tee_input: fix comment from an intermediate commit
FAQ: additional notes on getting HTTPS redirects right
configurator: update RDoc and comments in examples
bump version to 0.95.0pre
configurator: listen :umask parameter for UNIX sockets
preserve user/group ownership when reopening logs
old_rails/static: avoid freezing strings
old_rails: autoload Static
const: no need to freeze HTTP_EXPECT
test_server: ensure stderr is written to before reading
tee_input: expand client error handling
replace "rescue => e" with "rescue Object => e"
socket_helper: do not hide errors when setting socket options
socket_helper: RDoc for constants
ClientShutdown: RDoc
Rakefile: add raa_update task
tee_input: client_error always raises
--
Eric Wong
^ permalink raw reply [relevance 4%]
* [PATCH] SIGHUP no longer drops lone, default listener
@ 2009-09-17 6:04 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2009-09-17 6:04 UTC (permalink / raw)
To: mongrel-unicorn
The following patch (or something functionally equivalent) along with
some sort of test case will be in the next release of Unicorn (due this
week along with more documentation updates).
Until then, if you're not explicitly specifying a listener anywhere,
specify one, even if it's the default (preferably in the config file) if
you plan on using SIGHUP to reload configs.
Just add the following line to your config file:
listen 8080
>From beefdb590c4cae9671bd96bf94962634ecbc6161 Mon Sep 17 00:00:00 2001
From: Eric Wong <normalperson@yhbt.net>
Date: Wed, 16 Sep 2009 22:31:20 -0700
Subject: [PATCH] SIGHUP no longer drops lone, default listener
When SIGHUP reloads the config, we didn't account for the case
where the listen socket was completely unspecified. Thus the
default listener (TCP port 8080), did not get preserved and
reinjected into the config properly.
Note that relying on the default listen or specifying listeners
on the command-line means it's practically impossible to unbind
listeners with a configuration file reload. We also need to
preserve the (unspecified) default listener across upgrades that
later result in SIGHUP, too; so we inject the default listener
into the command-line for upgrades.
---
lib/unicorn.rb | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/lib/unicorn.rb b/lib/unicorn.rb
index 4cc5c2d..0e46261 100644
--- a/lib/unicorn.rb
+++ b/lib/unicorn.rb
@@ -110,6 +110,8 @@ module Unicorn
config_listeners -= listener_names
if config_listeners.empty? && LISTENERS.empty?
config_listeners << Unicorn::Const::DEFAULT_LISTEN
+ init_listeners << Unicorn::Const::DEFAULT_LISTEN
+ START_CTX[:argv] << "-l#{Unicorn::Const::DEFAULT_LISTEN}"
end
config_listeners.each { |addr| listen(addr) }
raise ArgumentError, "no listeners" if LISTENERS.empty?
--
Eric Wong
^ permalink raw reply related [relevance 4%]
* [ANN] unicorn 0.91.0 - finally supports HTTP/0.9!
@ 2009-09-04 19:23 4% Eric Wong
0 siblings, 0 replies; 23+ results
From: Eric Wong @ 2009-09-04 19:23 UTC (permalink / raw)
To: mongrel-unicorn
Unicorn is a Rack HTTP server for Unix, fast clients and nothing else.
18 years too late, Unicorn finally gets HTTP/0.9 support as HTTP
was implemented in 1991.
Shortlog as follows:
Eric Wong (16):
Documentation updates
examples/echo: "Expect:" value is case-insensitive
http: make strings independent before modification
http: support for multi-line HTTP headers
tee_input: fix rdoc
unicorn_http: "fix" const warning
http: extension-methods allow any tokens
http: support for simple HTTP/0.9 GET requests
test_http_parser_ng: fix failing HTTP/0.9 test case
launcher: defer daemonized redirects until config is read
test to ensure stderr goes *somewhere* when daemonized
http: SERVER_PROTOCOL matches HTTP_VERSION
http: add HttpParser#headers? method
Support HTTP/0.9 entity-body-only responses
Redirect files in binary mode
unicorn 0.91.0
* site: http://unicorn.bogomips.org/
* git: git://git.bogomips.org/unicorn.git
* cgit: http://git.bogomips.org/cgit/unicorn.git/
* list: mongrel-unicorn@rubyforge.org
* nntp: nntp://news.gmane.org/gmane.comp.lang.ruby.unicorn.general
--
Eric Wong
^ permalink raw reply [relevance 4%]
Results 1-23 of 23 | reverse | options above
-- pct% links below jump to the message on this page, permalinks otherwise --
2009-09-04 19:23 4% [ANN] unicorn 0.91.0 - finally supports HTTP/0.9! Eric Wong
2009-09-17 6:04 4% [PATCH] SIGHUP no longer drops lone, default listener Eric Wong
2009-11-15 22:34 4% [ANN] unicorn 0.95.0 - we <3 Rainbows! and ponies too Eric Wong
2009-12-18 0:20 Usernames in the http_URL Scott Chacon
2009-12-18 1:23 ` Eric Wong
2009-12-18 2:31 ` Scott Chacon
2009-12-18 9:48 ` John-Paul Bader
2009-12-19 10:04 4% ` Eric Wong
2009-12-21 22:21 4% [ANN] unicorn 0.95.3 - userinfo in absoluteURIs Eric Wong
2010-06-16 0:09 5% anything left before 1.0? Eric Wong
2010-07-08 8:04 4% [ANN] unicorn 1.1.0 - small changes and cleanups Eric Wong
2011-03-08 4:40 6% [RFC/PATCH] Bundler/Sandbox documentation updates Eric Wong
2011-03-08 14:22 7% ` Justin Giancola
2011-03-10 0:49 7% ` Eric Wong
2011-03-09 10:39 6% ` Lawrence Pit
2011-03-10 0:52 7% ` Eric Wong
2011-03-10 3:30 7% ` Lawrence Pit
2011-03-10 21:29 6% ` Eric Wong
2011-04-30 6:45 4% [ANN] unicorn 3.6.2 (and 1.1.7) - fix Unicorn::OobGC module Eric Wong
2012-05-11 1:12 [raindrops] testers on 32-bit FreeBSD wanted Eric Wong
2012-05-12 6:05 4% ` Eric Wong
2013-06-21 8:14 5% [ANN] unicorn 4.6.3 - fix --no-default-middleware option Eric Wong
2016-01-07 3:41 3% [PUSHED] various documentation updates Eric Wong
2016-01-27 23:16 4% [ANN] unicorn 5.1.0.pre1 - Rack HTTP server for fast clients and *nix Eric Wong
2016-04-01 0:43 3% [ANN] unicorn 5.1.0 " Eric Wong
2017-12-23 23:42 4% [ANN] unicorn 5.4.0 - Rack HTTP server for fast clients and Unix Eric Wong
2019-12-20 2:15 3% [ANN] unicorn 5.5.2 - Rack HTTP server for fast clients and *nix Eric Wong
2020-01-31 20:48 4% [ANN] unicorn 5.5.3 " Eric Wong
Code repositories for project(s) associated with this public inbox
https://yhbt.net/unicorn.git/
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).