From: Ryan Walklin <ryan@testtoast.com>
To: Andre Przywara <andre.przywara@arm.com>,
Chen-Yu Tsai <wens@csie.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Samuel Holland <samuel@sholland.org>,
Chris Morgan <macromorgan@hotmail.com>
Cc: devicetree@vger.kernel.org, linux-sunxi@lists.linux.dev,
Ryan Walklin <ryan@testtoast.com>
Subject: [PATCH v2 4/5] arm64: dts: allwinner: h700: Add RG35XX-H DTS
Date: Sat, 20 Apr 2024 22:43:58 +1200 [thread overview]
Message-ID: <20240420104354.334947-10-ryan@testtoast.com> (raw)
In-Reply-To: <20240420104354.334947-5-ryan@testtoast.com>
The RG35XX-H adds thumbsticks, a stereo speaker, and a second USB port to the RG35XX-Plus, and has a horizontal form factor.
Enabled in this DTS:
- Thumbsticks
- Second USB port
Changelog v1..v2:
- Update copyright
- Spaces -> Tabs
- Add GP ADC joystick axes and mux [1]
- Add EHCI/OHCI1 for second USB port and add vbus supply
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
[1]: https://lore.kernel.org/linux-sunxi/20240417170423.20640-1-macroalpha82@gmail.com/T/#t
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
---
.../sun50i-h700-anbernic-rg35xx-h.dts | 126 ++++++++++++++++++
1 file changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
new file mode 100644
index 000000000000..d62cf5cd9d9b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h700-anbernic-rg35xx-h.dts
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright (C) 2024 Ryan Walklin <ryan@testtoast.com>.
+ * Copyright (C) 2024 Chris Morgan <macroalpha82@gmail.com>.
+ */
+
+#include "sun50i-h700-anbernic-rg35xx-plus.dts"
+
+/ {
+ model = "Anbernic RG35XX H";
+ compatible = "anbernic,rg35xx-h", "allwinner,sun50i-h700";
+
+ adc-joystick {
+ compatible = "adc-joystick";
+ io-channels = <&adc_mux 0>,
+ <&adc_mux 1>,
+ <&adc_mux 2>,
+ <&adc_mux 3>;
+ pinctrl-0 = <&joy_mux_pin>;
+ pinctrl-names = "default";
+ poll-interval = <60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ axis@0 {
+ reg = <0>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <4096 0>;
+ linux,code = <ABS_X>;
+ };
+
+ axis@1 {
+ reg = <1>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <0 4096>;
+ linux,code = <ABS_Y>;
+ };
+
+ axis@2 {
+ reg = <2>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <0 4096>;
+ linux,code = <ABS_RX>;
+ };
+
+ axis@3 {
+ reg = <3>;
+ abs-flat = <32>;
+ abs-fuzz = <32>;
+ abs-range = <4096 0>;
+ linux,code = <ABS_RY>;
+ };
+ };
+
+ adc_mux: adc-mux {
+ compatible = "io-channel-mux";
+ channels = "left_x", "left_y", "right_x", "right_y";
+ #io-channel-cells = <1>;
+ io-channels = <&gpadc 0>;
+ io-channel-names = "parent";
+ mux-controls = <&gpio_mux>;
+ settle-time-us = <100>;
+ };
+
+ gpio_keys: gpio-keys-thumb {
+ compatible = "gpio-keys";
+
+ button-thumbl {
+ label = "GPIO Thumb Left";
+ gpios = <&pio 4 8 GPIO_ACTIVE_LOW>; /* PE8 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_THUMBL>;
+ };
+
+ button-thumbr {
+ label = "GPIO Thumb Right";
+ gpios = <&pio 4 9 GPIO_ACTIVE_LOW>; /* PE9 */
+ linux,input-type = <EV_KEY>;
+ linux,code = <BTN_THUMBR>;
+ };
+ };
+
+ gpio_mux: mux-controller {
+ compatible = "gpio-mux";
+ mux-gpios = <&pio 8 1 GPIO_ACTIVE_LOW>,
+ <&pio 8 2 GPIO_ACTIVE_LOW>; /* PI1, PI2 */
+ #mux-control-cells = <0>;
+ };
+};
+
+&gpadc {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ channel@0 {
+ reg = <0>;
+ };
+};
+
+&pio {
+ joy_mux_pin: joy-mux-pin {
+ pins = "PI0";
+ function = "gpio_out";
+ };
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&ohci1 {
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usbphy {
+ usb1_vbus-supply = <®_vcc_usb>;
+};
--
2.44.0
next prev parent reply other threads:[~2024-04-20 10:47 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-20 10:43 [PATCH v2 0/5] arm64: dts: allwinner: Add Anbernic RG35XX (Plus/H/2024) support Ryan Walklin
2024-04-20 10:43 ` [PATCH v2 1/5] dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants Ryan Walklin
2024-04-20 10:43 ` [PATCH v2 2/5] arm64: dts: allwinner: h700: Add RG35XX 2024 DTS Ryan Walklin
2024-04-20 10:59 ` Krzysztof Kozlowski
2024-04-21 2:05 ` Ryan Walklin
2024-04-21 0:49 ` Andre Przywara
2024-04-21 2:28 ` Ryan Walklin
2024-04-22 10:17 ` Andre Przywara
2024-04-21 4:00 ` Chris Morgan
2024-04-21 8:43 ` Ryan Walklin
2024-04-22 12:34 ` Andre Przywara
2024-04-22 11:06 ` Andre Przywara
2024-04-21 20:01 ` Jernej Škrabec
2024-04-20 10:43 ` [PATCH v2 3/5] arm64: dts: allwinner: h700: Add RG35XX-Plus DTS Ryan Walklin
2024-04-21 0:53 ` Andre Przywara
2024-04-21 16:53 ` Chris Morgan
2024-04-20 10:43 ` Ryan Walklin [this message]
2024-04-21 1:06 ` [PATCH v2 4/5] arm64: dts: allwinner: h700: Add RG35XX-H DTS Andre Przywara
2024-04-21 3:09 ` Chris Morgan
2024-04-21 8:18 ` Ryan Walklin
2024-04-22 10:17 ` Andre Przywara
2024-04-20 10:43 ` [PATCH v2 5/5] arm64: dts: allwinner: h700: Add RG35XX DTBs to Makefile Ryan Walklin
2024-04-21 1:07 ` Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240420104354.334947-10-ryan@testtoast.com \
--to=ryan@testtoast.com \
--cc=andre.przywara@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=macromorgan@hotmail.com \
--cc=robh@kernel.org \
--cc=samuel@sholland.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.