* [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8
@ 2024-04-20 10:51 ` Arınç ÜNAL
0 siblings, 0 replies; 8+ messages in thread
From: Arınç ÜNAL via B4 Relay @ 2024-04-20 10:51 UTC (permalink / raw)
To: stable
Cc: Daniel Golle, Arınç ÜNAL, Paolo Abeni,
Florian Fainelli, Jakub Kicinski
Hello.
These are the remaining bugfix patches for the MT7530 DSA subdriver.
They didn't apply as is to the 6.8 stable tree so I have submitted the
adjusted versions in this thread. Please apply them in the order
they were submitted.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Arınç ÜNAL (2):
net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
drivers/net/dsa/mt7530.c | 22 +++++++++++++++-------
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 16 insertions(+), 7 deletions(-)
---
base-commit: 12dadc409c2bd8538c6ee0e56e191efde6d92007
change-id: 20240420-for-stable-6-8-backports-5a210f6cfb0c
Best regards,
--
Arınç ÜNAL <arinc.unal@arinc9.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8
@ 2024-04-20 10:51 ` Arınç ÜNAL
0 siblings, 0 replies; 8+ messages in thread
From: Arınç ÜNAL @ 2024-04-20 10:51 UTC (permalink / raw)
To: stable
Cc: Daniel Golle, Arınç ÜNAL, Paolo Abeni,
Florian Fainelli, Jakub Kicinski
Hello.
These are the remaining bugfix patches for the MT7530 DSA subdriver.
They didn't apply as is to the 6.8 stable tree so I have submitted the
adjusted versions in this thread. Please apply them in the order
they were submitted.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Arınç ÜNAL (2):
net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
drivers/net/dsa/mt7530.c | 22 +++++++++++++++-------
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 16 insertions(+), 7 deletions(-)
---
base-commit: 12dadc409c2bd8538c6ee0e56e191efde6d92007
change-id: 20240420-for-stable-6-8-backports-5a210f6cfb0c
Best regards,
--
Arınç ÜNAL <arinc.unal@arinc9.com>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
2024-04-20 10:51 ` Arınç ÜNAL
@ 2024-04-20 10:51 ` Arınç ÜNAL
-1 siblings, 0 replies; 8+ messages in thread
From: Arınç ÜNAL via B4 Relay @ 2024-04-20 10:51 UTC (permalink / raw)
To: stable; +Cc: Daniel Golle, Arınç ÜNAL, Paolo Abeni
From: Arınç ÜNAL <arinc.unal@arinc9.com>
[ Upstream commit 5f563c31ff0c40ce395d0bae7daa94c7950dac97 ]
The MT7530 switch after reset initialises with a core clock frequency that
works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock
frequency must be set to 500MHz.
The mt7530_pll_setup() function is responsible of setting the core clock
frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This
causes MT7530 switch with 25MHz XTAL to egress and ingress frames
improperly.
Introduce a check to run it only on MT7530 with 40MHz XTAL.
The core clock frequency is set by writing to a switch PHY's register.
Access to the PHY's register is done via the MDIO bus the switch is also
on. Therefore, it works only when the switch makes switch PHYs listen on
the MDIO bus the switch is on. This is controlled either by the state of
the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the
modifiable trap register.
When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means
accessing PHY registers via the PHY indirect access control register of the
switch.
When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means
accessing PHY registers via the MDIO bus the switch is on.
For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high,
the core clock frequency won't be set to 500MHz, causing the switch to
egress and ingress frames improperly.
Run mt7530_pll_setup() after PHY direct access is set on the modifiable
trap register.
With these two changes, all MT7530 switches with 25MHz and 40MHz, and
P1_LED_1 pulled high or low, will egress and ingress frames properly.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/4a5dd143f2172ec97a2872fa29c7c4cd520f45b5/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1039
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 22b97505fa53..a9ee6336759c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2469,8 +2469,6 @@ mt7530_setup(struct dsa_switch *ds)
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
- mt7530_pll_setup(priv);
-
/* Lower Tx driving for TRGMII path */
for (i = 0; i < NUM_TRGMII_CTRL; i++)
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
@@ -2488,6 +2486,9 @@ mt7530_setup(struct dsa_switch *ds)
priv->p6_interface = PHY_INTERFACE_MODE_NA;
+ if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+
mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
--
2.40.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/2] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530
@ 2024-04-20 10:51 ` Arınç ÜNAL
0 siblings, 0 replies; 8+ messages in thread
From: Arınç ÜNAL @ 2024-04-20 10:51 UTC (permalink / raw)
To: stable; +Cc: Daniel Golle, Arınç ÜNAL, Paolo Abeni
[ Upstream commit 5f563c31ff0c40ce395d0bae7daa94c7950dac97 ]
The MT7530 switch after reset initialises with a core clock frequency that
works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock
frequency must be set to 500MHz.
The mt7530_pll_setup() function is responsible of setting the core clock
frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This
causes MT7530 switch with 25MHz XTAL to egress and ingress frames
improperly.
Introduce a check to run it only on MT7530 with 40MHz XTAL.
The core clock frequency is set by writing to a switch PHY's register.
Access to the PHY's register is done via the MDIO bus the switch is also
on. Therefore, it works only when the switch makes switch PHYs listen on
the MDIO bus the switch is on. This is controlled either by the state of
the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the
modifiable trap register.
When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means
accessing PHY registers via the PHY indirect access control register of the
switch.
When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means
accessing PHY registers via the MDIO bus the switch is on.
For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high,
the core clock frequency won't be set to 500MHz, causing the switch to
egress and ingress frames improperly.
Run mt7530_pll_setup() after PHY direct access is set on the modifiable
trap register.
With these two changes, all MT7530 switches with 25MHz and 40MHz, and
P1_LED_1 pulled high or low, will egress and ingress frames properly.
Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/4a5dd143f2172ec97a2872fa29c7c4cd520f45b5/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1039
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 22b97505fa53..a9ee6336759c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2469,8 +2469,6 @@ mt7530_setup(struct dsa_switch *ds)
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
SYS_CTRL_REG_RST);
- mt7530_pll_setup(priv);
-
/* Lower Tx driving for TRGMII path */
for (i = 0; i < NUM_TRGMII_CTRL; i++)
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
@@ -2488,6 +2486,9 @@ mt7530_setup(struct dsa_switch *ds)
priv->p6_interface = PHY_INTERFACE_MODE_NA;
+ if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ)
+ mt7530_pll_setup(priv);
+
mt753x_trap_frames(priv);
/* Enable and reset MIB counters */
--
2.40.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
2024-04-20 10:51 ` Arınç ÜNAL
@ 2024-04-20 10:51 ` Arınç ÜNAL
-1 siblings, 0 replies; 8+ messages in thread
From: Arınç ÜNAL via B4 Relay @ 2024-04-20 10:51 UTC (permalink / raw)
To: stable
Cc: Daniel Golle, Arınç ÜNAL, Florian Fainelli,
Jakub Kicinski
From: Arınç ÜNAL <arinc.unal@arinc9.com>
[ Upstream commit 06dfcd4098cfdc4d4577d94793a4f9125386da8b ]
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.
There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.
With this change, EEE can now be enabled using ethtool.
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 17 ++++++++++++-----
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a9ee6336759c..554fe4240eb5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2704,18 +2704,25 @@ mt7531_setup(struct dsa_switch *ds)
priv->p5_interface = PHY_INTERFACE_MODE_NA;
priv->p6_interface = PHY_INTERFACE_MODE_NA;
- /* Enable PHY core PLL, since phy_device has not yet been created
- * provided for phy_[read,write]_mmd_indirect is called, we provide
- * our own mt7531_ind_mmd_phy_[read,write] to complete this
- * function.
+ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
+ * phy_device has not yet been created provided for
+ * phy_[read,write]_mmd_indirect is called, we provide our own
+ * mt7531_ind_mmd_phy_[read,write] to complete this function.
*/
val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
- val |= MT7531_PHY_PLL_BYPASS_MODE;
+ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
val &= ~MT7531_PHY_PLL_OFF;
mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
CORE_PLL_GROUP4, val);
+ /* Disable EEE advertisement on the switch PHYs. */
+ for (i = MT753X_CTRL_PHY_ADDR;
+ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+ 0);
+ }
+
mt7531_setup_common(ds);
/* Setup VLAN ID 0 for VLAN-unaware bridges */
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ddefeb69afda..5e3e8427d88d 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -630,6 +630,7 @@ enum mt7531_clk_skew {
#define RG_SYSPLL_DDSFBK_EN BIT(12)
#define RG_SYSPLL_BIAS_EN BIT(11)
#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
+#define MT7531_RG_SYSPLL_DMY2 BIT(6)
#define MT7531_PHY_PLL_OFF BIT(5)
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
--
2.40.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards
@ 2024-04-20 10:51 ` Arınç ÜNAL
0 siblings, 0 replies; 8+ messages in thread
From: Arınç ÜNAL @ 2024-04-20 10:51 UTC (permalink / raw)
To: stable
Cc: Daniel Golle, Arınç ÜNAL, Florian Fainelli,
Jakub Kicinski
[ Upstream commit 06dfcd4098cfdc4d4577d94793a4f9125386da8b ]
The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is
enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board
(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting
the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to
SkyLake Huang (黃啟澤) from MediaTek for providing information on the
internal EEE switch bit.
There are existing boards that were not designed to pull the pin low.
Because of that, the EEE status currently depends on the board design.
The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually
used to control an LED. Once the bit is unset, the pin will be low. That
will make the active low LED turn on. The pin is controlled by the switch
PHY. It seems that the PHY controls the pin in the way that it inverts the
pin state. That means depending on the wiring of the LED connected to
LAN2LED0 on the board, the LED may be on without an active link.
To not cause this unwanted behaviour whilst enabling EEE on all boards, set
the internal EEE switch bit on the CORE_PLL_GROUP4 register.
My testing on MT7531 shows a certain amount of traffic loss when EEE is
enabled. That said, I haven't come across a board that enables EEE. So
enable EEE on the switch MACs but disable EEE advertisement on the switch
PHYs. This way, we don't change the behaviour of the majority of the boards
that have this switch. The mediatek-ge PHY driver already disables EEE
advertisement on the switch PHYs but my testing shows that it is somehow
enabled afterwards. Disabling EEE advertisement before the PHY driver
initialises keeps it off.
With this change, EEE can now be enabled using ethtool.
Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
drivers/net/dsa/mt7530.c | 17 ++++++++++++-----
drivers/net/dsa/mt7530.h | 1 +
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a9ee6336759c..554fe4240eb5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2704,18 +2704,25 @@ mt7531_setup(struct dsa_switch *ds)
priv->p5_interface = PHY_INTERFACE_MODE_NA;
priv->p6_interface = PHY_INTERFACE_MODE_NA;
- /* Enable PHY core PLL, since phy_device has not yet been created
- * provided for phy_[read,write]_mmd_indirect is called, we provide
- * our own mt7531_ind_mmd_phy_[read,write] to complete this
- * function.
+ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since
+ * phy_device has not yet been created provided for
+ * phy_[read,write]_mmd_indirect is called, we provide our own
+ * mt7531_ind_mmd_phy_[read,write] to complete this function.
*/
val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR,
MDIO_MMD_VEND2, CORE_PLL_GROUP4);
- val |= MT7531_PHY_PLL_BYPASS_MODE;
+ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE;
val &= ~MT7531_PHY_PLL_OFF;
mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2,
CORE_PLL_GROUP4, val);
+ /* Disable EEE advertisement on the switch PHYs. */
+ for (i = MT753X_CTRL_PHY_ADDR;
+ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) {
+ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV,
+ 0);
+ }
+
mt7531_setup_common(ds);
/* Setup VLAN ID 0 for VLAN-unaware bridges */
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index ddefeb69afda..5e3e8427d88d 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -630,6 +630,7 @@ enum mt7531_clk_skew {
#define RG_SYSPLL_DDSFBK_EN BIT(12)
#define RG_SYSPLL_BIAS_EN BIT(11)
#define RG_SYSPLL_BIAS_LPF_EN BIT(10)
+#define MT7531_RG_SYSPLL_DMY2 BIT(6)
#define MT7531_PHY_PLL_OFF BIT(5)
#define MT7531_PHY_PLL_BYPASS_MODE BIT(4)
--
2.40.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8
2024-04-20 10:51 ` Arınç ÜNAL
` (2 preceding siblings ...)
(?)
@ 2024-04-20 11:19 ` Arınç ÜNAL
2024-04-23 16:27 ` Greg KH
-1 siblings, 1 reply; 8+ messages in thread
From: Arınç ÜNAL @ 2024-04-20 11:19 UTC (permalink / raw)
To: stable; +Cc: Daniel Golle, Paolo Abeni, Florian Fainelli, Jakub Kicinski
On 20/04/2024 13:51, Arınç ÜNAL via B4 Relay wrote:
> Hello.
>
> These are the remaining bugfix patches for the MT7530 DSA subdriver.
> They didn't apply as is to the 6.8 stable tree so I have submitted the
> adjusted versions in this thread. Please apply them in the order
> they were submitted.
Please apply these adjusted versions to 6.6 as well.
Arınç
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8
2024-04-20 11:19 ` [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8 Arınç ÜNAL
@ 2024-04-23 16:27 ` Greg KH
0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2024-04-23 16:27 UTC (permalink / raw)
To: Arınç ÜNAL
Cc: stable, Daniel Golle, Paolo Abeni, Florian Fainelli,
Jakub Kicinski
On Sat, Apr 20, 2024 at 02:19:46PM +0300, Arınç ÜNAL wrote:
> On 20/04/2024 13:51, Arınç ÜNAL via B4 Relay wrote:
> > Hello.
> >
> > These are the remaining bugfix patches for the MT7530 DSA subdriver.
> > They didn't apply as is to the 6.8 stable tree so I have submitted the
> > adjusted versions in this thread. Please apply them in the order
> > they were submitted.
>
> Please apply these adjusted versions to 6.6 as well.
Both now queued up, thanks.
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2024-04-23 16:28 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2024-04-20 10:51 [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8 Arınç ÜNAL via B4 Relay
2024-04-20 10:51 ` Arınç ÜNAL
2024-04-20 10:51 ` [PATCH 1/2] net: dsa: mt7530: fix improper frames on all 25MHz and 40MHz XTAL MT7530 Arınç ÜNAL via B4 Relay
2024-04-20 10:51 ` Arınç ÜNAL
2024-04-20 10:51 ` [PATCH 2/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards Arınç ÜNAL via B4 Relay
2024-04-20 10:51 ` Arınç ÜNAL
2024-04-20 11:19 ` [PATCH 0/2] Please apply these MT7530 DSA subdriver patches to 6.8 Arınç ÜNAL
2024-04-23 16:27 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.