From: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
To: linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Sudeep Holla <sudeep.holla@arm.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
Charles Garcia Tobin <Charles.Garcia-Tobin@arm.com>,
Nicolas Pitre <nico@linaro.org>, Rob Herring <robh+dt@kernel.org>,
Grant Likely <grant.likely@linaro.org>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Amit Kucheria <amit.kucheria@linaro.org>,
Vincent Guittot <vincent.guittot@linaro.org>,
Antti Miettinen <ananaza@iki.fi>,
Stephen Boyd <sboyd@codeaurora.org>,
Kevin Hilman <khilman@linaro.org>,
Sebastian Capella <sebcape@gmail.com>,
Mark Brown <broonie@kernel.org>, Paul Walmsley <paul@pwsan.com>,
Chander Kashyap <k.chander@samsung.com>,
Geoff
Subject: [PATCH v9 5/8] drivers: cpuidle: implement DT based idle states infrastructure
Date: Fri, 5 Sep 2014 18:34:54 +0100 [thread overview]
Message-ID: <1409938498-17984-6-git-send-email-lorenzo.pieralisi@arm.com> (raw)
In-Reply-To: <1409938498-17984-1-git-send-email-lorenzo.pieralisi@arm.com>
On most common ARM systems, the low-power states a CPU can be put into are
not discoverable in HW and require device tree bindings to describe
power down suspend operations and idle states parameters.
In order to enable DT based idle states and configure idle drivers, this
patch implements the bulk infrastructure required to parse the device tree
idle states bindings and initialize the corresponding CPUidle driver states
data.
The parsing API accepts a start index that defines the first idle state
that should be initialized by the parsing code in order to give new and
legacy driver flexibility over which states should be parsed using the
new DT mechanism.
The idle states node(s) is obtained from the phandle list of the first cpu
in the driver cpumask; the kernel checks that the idle state node phandle
is the same for all CPUs in the driver cpumask before declaring the idle state
as valid and start parsing its content.
The idle state enter function pointer is initialized through DT match
structures passed in by the CPUidle driver, so that ARM legacy code can
cope with platform specific idle entry method based on compatible
string matching and the code used to initialize the enter function pointer
can be moved to the DT generic layer.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/cpuidle/Kconfig | 3 +
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/dt_idle_states.c | 213 +++++++++++++++++++++++++++++++++++++++
drivers/cpuidle/dt_idle_states.h | 7 ++
4 files changed, 224 insertions(+)
create mode 100644 drivers/cpuidle/dt_idle_states.c
create mode 100644 drivers/cpuidle/dt_idle_states.h
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index 32748c3..8deb934 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -25,6 +25,9 @@ config CPU_IDLE_GOV_MENU
bool "Menu governor (for tickless system)"
default y
+config DT_IDLE_STATES
+ bool
+
menu "ARM CPU Idle Drivers"
depends on ARM
source "drivers/cpuidle/Kconfig.arm"
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 11edb31..002b653 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -4,6 +4,7 @@
obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
+obj-$(CONFIG_DT_IDLE_STATES) += dt_idle_states.o
##################################################################################
# ARM SoC drivers
diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c
new file mode 100644
index 0000000..52f4d11
--- /dev/null
+++ b/drivers/cpuidle/dt_idle_states.c
@@ -0,0 +1,213 @@
+/*
+ * DT idle states parsing code.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "DT idle-states: " fmt
+
+#include <linux/cpuidle.h>
+#include <linux/cpumask.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "dt_idle_states.h"
+
+static int init_state_node(struct cpuidle_state *idle_state,
+ const struct of_device_id *matches,
+ struct device_node *state_node)
+{
+ int err;
+ const struct of_device_id *match_id;
+
+ match_id = of_match_node(matches, state_node);
+ if (!match_id)
+ return -ENODEV;
+ /*
+ * CPUidle drivers are expected to initialize the const void *data
+ * pointer of the passed in struct of_device_id array to the idle
+ * state enter function.
+ */
+ idle_state->enter = match_id->data;
+
+ err = of_property_read_u32(state_node, "wakeup-latency-us",
+ &idle_state->exit_latency);
+ if (err) {
+ u32 entry_latency, exit_latency;
+
+ err = of_property_read_u32(state_node, "entry-latency-us",
+ &entry_latency);
+ if (err) {
+ pr_debug(" * %s missing entry-latency-us property\n",
+ state_node->full_name);
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32(state_node, "exit-latency-us",
+ &exit_latency);
+ if (err) {
+ pr_debug(" * %s missing exit-latency-us property\n",
+ state_node->full_name);
+ return -EINVAL;
+ }
+ /*
+ * If wakeup-latency-us is missing, default to entry+exit
+ * latencies as defined in idle states bindings
+ */
+ idle_state->exit_latency = entry_latency + exit_latency;
+ }
+
+ err = of_property_read_u32(state_node, "min-residency-us",
+ &idle_state->target_residency);
+ if (err) {
+ pr_debug(" * %s missing min-residency-us property\n",
+ state_node->full_name);
+ return -EINVAL;
+ }
+
+ idle_state->flags = CPUIDLE_FLAG_TIME_VALID;
+ if (of_property_read_bool(state_node, "local-timer-stop"))
+ idle_state->flags |= CPUIDLE_FLAG_TIMER_STOP;
+ /*
+ * TODO:
+ * replace with kstrdup and pointer assignment when name
+ * and desc become string pointers
+ */
+ strncpy(idle_state->name, state_node->name, CPUIDLE_NAME_LEN - 1);
+ strncpy(idle_state->desc, state_node->name, CPUIDLE_DESC_LEN - 1);
+ return 0;
+}
+
+/*
+ * Check that the idle state is uniform across all CPUs in the CPUidle driver
+ * cpumask
+ */
+static bool idle_state_valid(struct device_node *state_node, unsigned int idx,
+ const cpumask_t *cpumask)
+{
+ int cpu;
+ struct device_node *cpu_node, *curr_state_node;
+ bool valid = true;
+
+ /*
+ * Compare idle state phandles for index idx on all CPUs in the
+ * CPUidle driver cpumask. Start from next logical cpu following
+ * cpumask_first(cpumask) since that's the CPU state_node was
+ * retrieved from. If a mismatch is found bail out straight
+ * away since we certainly hit a firmware misconfiguration.
+ */
+ for (cpu = cpumask_next(cpumask_first(cpumask), cpumask);
+ cpu < nr_cpu_ids; cpu = cpumask_next(cpu, cpumask)) {
+ cpu_node = of_cpu_device_node_get(cpu);
+ curr_state_node = of_parse_phandle(cpu_node, "cpu-idle-states",
+ idx);
+ if (state_node != curr_state_node)
+ valid = false;
+
+ of_node_put(curr_state_node);
+ of_node_put(cpu_node);
+ if (!valid)
+ break;
+ }
+
+ return valid;
+}
+
+/**
+ * dt_init_idle_driver() - Parse the DT idle states and initialize the
+ * idle driver states array
+ * @drv: Pointer to CPU idle driver to be initialized
+ * @matches: Array of of_device_id match structures to search in for
+ * compatible idle state nodes. The data pointer for each valid
+ * struct of_device_id entry in the matches array must point to
+ * a function with the following signature, that corresponds to
+ * the CPUidle state enter function signature:
+ *
+ * int (*)(struct cpuidle_device *dev,
+ * struct cpuidle_driver *drv,
+ * int index);
+ *
+ * @start_idx: First idle state index to be initialized
+ *
+ * If DT idle states are detected and are valid the state count and states
+ * array entries in the cpuidle driver are initialized accordingly starting
+ * from index start_idx.
+ *
+ * Return: number of valid DT idle states parsed, <0 on failure
+ */
+int dt_init_idle_driver(struct cpuidle_driver *drv,
+ const struct of_device_id *matches,
+ unsigned int start_idx)
+{
+ struct cpuidle_state *idle_state;
+ struct device_node *state_node, *cpu_node;
+ int i, err = 0;
+ const cpumask_t *cpumask;
+ unsigned int state_idx = start_idx;
+
+ if (state_idx >= CPUIDLE_STATE_MAX)
+ return -EINVAL;
+ /*
+ * We get the idle states for the first logical cpu in the
+ * driver mask (or cpu_possible_mask if the driver cpumask is not set)
+ * and we check through idle_state_valid() if they are uniform
+ * across CPUs, otherwise we hit a firmware misconfiguration.
+ */
+ cpumask = drv->cpumask ? : cpu_possible_mask;
+ cpu_node = of_cpu_device_node_get(cpumask_first(cpumask));
+
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
+ break;
+
+ if (!idle_state_valid(state_node, i, cpumask)) {
+ pr_warn("%s idle state not valid, bailing out\n",
+ state_node->full_name);
+ err = -EINVAL;
+ break;
+ }
+
+ if (state_idx == CPUIDLE_STATE_MAX) {
+ pr_warn("State index reached static CPU idle driver states array size\n");
+ break;
+ }
+
+ idle_state = &drv->states[state_idx++];
+ err = init_state_node(idle_state, matches, state_node);
+ if (err) {
+ pr_err("Parsing idle state node %s failed with err %d\n",
+ state_node->full_name, err);
+ err = -EINVAL;
+ break;
+ }
+ of_node_put(state_node);
+ }
+
+ of_node_put(state_node);
+ of_node_put(cpu_node);
+ if (err)
+ return err;
+ /*
+ * Update the driver state count only if some valid DT idle states
+ * were detected
+ */
+ if (i)
+ drv->state_count = state_idx;
+
+ /*
+ * Return the number of present and valid DT idle states, which can
+ * also be 0 on platforms with missing DT idle states or legacy DT
+ * configuration predating the DT idle states bindings.
+ */
+ return i;
+}
+EXPORT_SYMBOL_GPL(dt_init_idle_driver);
diff --git a/drivers/cpuidle/dt_idle_states.h b/drivers/cpuidle/dt_idle_states.h
new file mode 100644
index 0000000..4818134
--- /dev/null
+++ b/drivers/cpuidle/dt_idle_states.h
@@ -0,0 +1,7 @@
+#ifndef __DT_IDLE_STATES
+#define __DT_IDLE_STATES
+
+int dt_init_idle_driver(struct cpuidle_driver *drv,
+ const struct of_device_id *matches,
+ unsigned int start_idx);
+#endif
--
1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: lorenzo.pieralisi@arm.com (Lorenzo Pieralisi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 5/8] drivers: cpuidle: implement DT based idle states infrastructure
Date: Fri, 5 Sep 2014 18:34:54 +0100 [thread overview]
Message-ID: <1409938498-17984-6-git-send-email-lorenzo.pieralisi@arm.com> (raw)
In-Reply-To: <1409938498-17984-1-git-send-email-lorenzo.pieralisi@arm.com>
On most common ARM systems, the low-power states a CPU can be put into are
not discoverable in HW and require device tree bindings to describe
power down suspend operations and idle states parameters.
In order to enable DT based idle states and configure idle drivers, this
patch implements the bulk infrastructure required to parse the device tree
idle states bindings and initialize the corresponding CPUidle driver states
data.
The parsing API accepts a start index that defines the first idle state
that should be initialized by the parsing code in order to give new and
legacy driver flexibility over which states should be parsed using the
new DT mechanism.
The idle states node(s) is obtained from the phandle list of the first cpu
in the driver cpumask; the kernel checks that the idle state node phandle
is the same for all CPUs in the driver cpumask before declaring the idle state
as valid and start parsing its content.
The idle state enter function pointer is initialized through DT match
structures passed in by the CPUidle driver, so that ARM legacy code can
cope with platform specific idle entry method based on compatible
string matching and the code used to initialize the enter function pointer
can be moved to the DT generic layer.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
---
drivers/cpuidle/Kconfig | 3 +
drivers/cpuidle/Makefile | 1 +
drivers/cpuidle/dt_idle_states.c | 213 +++++++++++++++++++++++++++++++++++++++
drivers/cpuidle/dt_idle_states.h | 7 ++
4 files changed, 224 insertions(+)
create mode 100644 drivers/cpuidle/dt_idle_states.c
create mode 100644 drivers/cpuidle/dt_idle_states.h
diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
index 32748c3..8deb934 100644
--- a/drivers/cpuidle/Kconfig
+++ b/drivers/cpuidle/Kconfig
@@ -25,6 +25,9 @@ config CPU_IDLE_GOV_MENU
bool "Menu governor (for tickless system)"
default y
+config DT_IDLE_STATES
+ bool
+
menu "ARM CPU Idle Drivers"
depends on ARM
source "drivers/cpuidle/Kconfig.arm"
diff --git a/drivers/cpuidle/Makefile b/drivers/cpuidle/Makefile
index 11edb31..002b653 100644
--- a/drivers/cpuidle/Makefile
+++ b/drivers/cpuidle/Makefile
@@ -4,6 +4,7 @@
obj-y += cpuidle.o driver.o governor.o sysfs.o governors/
obj-$(CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED) += coupled.o
+obj-$(CONFIG_DT_IDLE_STATES) += dt_idle_states.o
##################################################################################
# ARM SoC drivers
diff --git a/drivers/cpuidle/dt_idle_states.c b/drivers/cpuidle/dt_idle_states.c
new file mode 100644
index 0000000..52f4d11
--- /dev/null
+++ b/drivers/cpuidle/dt_idle_states.c
@@ -0,0 +1,213 @@
+/*
+ * DT idle states parsing code.
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ * Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define pr_fmt(fmt) "DT idle-states: " fmt
+
+#include <linux/cpuidle.h>
+#include <linux/cpumask.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "dt_idle_states.h"
+
+static int init_state_node(struct cpuidle_state *idle_state,
+ const struct of_device_id *matches,
+ struct device_node *state_node)
+{
+ int err;
+ const struct of_device_id *match_id;
+
+ match_id = of_match_node(matches, state_node);
+ if (!match_id)
+ return -ENODEV;
+ /*
+ * CPUidle drivers are expected to initialize the const void *data
+ * pointer of the passed in struct of_device_id array to the idle
+ * state enter function.
+ */
+ idle_state->enter = match_id->data;
+
+ err = of_property_read_u32(state_node, "wakeup-latency-us",
+ &idle_state->exit_latency);
+ if (err) {
+ u32 entry_latency, exit_latency;
+
+ err = of_property_read_u32(state_node, "entry-latency-us",
+ &entry_latency);
+ if (err) {
+ pr_debug(" * %s missing entry-latency-us property\n",
+ state_node->full_name);
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32(state_node, "exit-latency-us",
+ &exit_latency);
+ if (err) {
+ pr_debug(" * %s missing exit-latency-us property\n",
+ state_node->full_name);
+ return -EINVAL;
+ }
+ /*
+ * If wakeup-latency-us is missing, default to entry+exit
+ * latencies as defined in idle states bindings
+ */
+ idle_state->exit_latency = entry_latency + exit_latency;
+ }
+
+ err = of_property_read_u32(state_node, "min-residency-us",
+ &idle_state->target_residency);
+ if (err) {
+ pr_debug(" * %s missing min-residency-us property\n",
+ state_node->full_name);
+ return -EINVAL;
+ }
+
+ idle_state->flags = CPUIDLE_FLAG_TIME_VALID;
+ if (of_property_read_bool(state_node, "local-timer-stop"))
+ idle_state->flags |= CPUIDLE_FLAG_TIMER_STOP;
+ /*
+ * TODO:
+ * replace with kstrdup and pointer assignment when name
+ * and desc become string pointers
+ */
+ strncpy(idle_state->name, state_node->name, CPUIDLE_NAME_LEN - 1);
+ strncpy(idle_state->desc, state_node->name, CPUIDLE_DESC_LEN - 1);
+ return 0;
+}
+
+/*
+ * Check that the idle state is uniform across all CPUs in the CPUidle driver
+ * cpumask
+ */
+static bool idle_state_valid(struct device_node *state_node, unsigned int idx,
+ const cpumask_t *cpumask)
+{
+ int cpu;
+ struct device_node *cpu_node, *curr_state_node;
+ bool valid = true;
+
+ /*
+ * Compare idle state phandles for index idx on all CPUs in the
+ * CPUidle driver cpumask. Start from next logical cpu following
+ * cpumask_first(cpumask) since that's the CPU state_node was
+ * retrieved from. If a mismatch is found bail out straight
+ * away since we certainly hit a firmware misconfiguration.
+ */
+ for (cpu = cpumask_next(cpumask_first(cpumask), cpumask);
+ cpu < nr_cpu_ids; cpu = cpumask_next(cpu, cpumask)) {
+ cpu_node = of_cpu_device_node_get(cpu);
+ curr_state_node = of_parse_phandle(cpu_node, "cpu-idle-states",
+ idx);
+ if (state_node != curr_state_node)
+ valid = false;
+
+ of_node_put(curr_state_node);
+ of_node_put(cpu_node);
+ if (!valid)
+ break;
+ }
+
+ return valid;
+}
+
+/**
+ * dt_init_idle_driver() - Parse the DT idle states and initialize the
+ * idle driver states array
+ * @drv: Pointer to CPU idle driver to be initialized
+ * @matches: Array of of_device_id match structures to search in for
+ * compatible idle state nodes. The data pointer for each valid
+ * struct of_device_id entry in the matches array must point to
+ * a function with the following signature, that corresponds to
+ * the CPUidle state enter function signature:
+ *
+ * int (*)(struct cpuidle_device *dev,
+ * struct cpuidle_driver *drv,
+ * int index);
+ *
+ * @start_idx: First idle state index to be initialized
+ *
+ * If DT idle states are detected and are valid the state count and states
+ * array entries in the cpuidle driver are initialized accordingly starting
+ * from index start_idx.
+ *
+ * Return: number of valid DT idle states parsed, <0 on failure
+ */
+int dt_init_idle_driver(struct cpuidle_driver *drv,
+ const struct of_device_id *matches,
+ unsigned int start_idx)
+{
+ struct cpuidle_state *idle_state;
+ struct device_node *state_node, *cpu_node;
+ int i, err = 0;
+ const cpumask_t *cpumask;
+ unsigned int state_idx = start_idx;
+
+ if (state_idx >= CPUIDLE_STATE_MAX)
+ return -EINVAL;
+ /*
+ * We get the idle states for the first logical cpu in the
+ * driver mask (or cpu_possible_mask if the driver cpumask is not set)
+ * and we check through idle_state_valid() if they are uniform
+ * across CPUs, otherwise we hit a firmware misconfiguration.
+ */
+ cpumask = drv->cpumask ? : cpu_possible_mask;
+ cpu_node = of_cpu_device_node_get(cpumask_first(cpumask));
+
+ for (i = 0; ; i++) {
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+ if (!state_node)
+ break;
+
+ if (!idle_state_valid(state_node, i, cpumask)) {
+ pr_warn("%s idle state not valid, bailing out\n",
+ state_node->full_name);
+ err = -EINVAL;
+ break;
+ }
+
+ if (state_idx == CPUIDLE_STATE_MAX) {
+ pr_warn("State index reached static CPU idle driver states array size\n");
+ break;
+ }
+
+ idle_state = &drv->states[state_idx++];
+ err = init_state_node(idle_state, matches, state_node);
+ if (err) {
+ pr_err("Parsing idle state node %s failed with err %d\n",
+ state_node->full_name, err);
+ err = -EINVAL;
+ break;
+ }
+ of_node_put(state_node);
+ }
+
+ of_node_put(state_node);
+ of_node_put(cpu_node);
+ if (err)
+ return err;
+ /*
+ * Update the driver state count only if some valid DT idle states
+ * were detected
+ */
+ if (i)
+ drv->state_count = state_idx;
+
+ /*
+ * Return the number of present and valid DT idle states, which can
+ * also be 0 on platforms with missing DT idle states or legacy DT
+ * configuration predating the DT idle states bindings.
+ */
+ return i;
+}
+EXPORT_SYMBOL_GPL(dt_init_idle_driver);
diff --git a/drivers/cpuidle/dt_idle_states.h b/drivers/cpuidle/dt_idle_states.h
new file mode 100644
index 0000000..4818134
--- /dev/null
+++ b/drivers/cpuidle/dt_idle_states.h
@@ -0,0 +1,7 @@
+#ifndef __DT_IDLE_STATES
+#define __DT_IDLE_STATES
+
+int dt_init_idle_driver(struct cpuidle_driver *drv,
+ const struct of_device_id *matches,
+ unsigned int start_idx);
+#endif
--
1.9.1
next prev parent reply other threads:[~2014-09-05 17:34 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-05 17:34 [PATCH v9 0/8] ARM generic idle states Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-05 17:34 ` [PATCH v9 1/8] Documentation: arm: define DT idle states bindings Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-05 17:34 ` [PATCH v9 2/8] arm64: kernel: refactor the CPU suspend API for retention states Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-05 17:34 ` [PATCH v9 3/8] arm64: kernel: introduce cpu_init_idle CPU operation Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-05 17:34 ` [PATCH v9 4/8] arm64: add PSCI CPU_SUSPEND based cpu_suspend support Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi [this message]
2014-09-05 17:34 ` [PATCH v9 5/8] drivers: cpuidle: implement DT based idle states infrastructure Lorenzo Pieralisi
2014-09-05 20:00 ` Kevin Hilman
2014-09-05 21:29 ` Lorenzo Pieralisi
2014-09-05 21:29 ` Lorenzo Pieralisi
2014-09-05 21:36 ` Mark Brown
2014-09-05 21:36 ` Mark Brown
2014-09-08 15:58 ` Kevin Hilman
2014-09-08 15:58 ` Kevin Hilman
2014-09-09 15:51 ` Lorenzo Pieralisi
2014-09-09 15:51 ` Lorenzo Pieralisi
[not found] ` <1409938498-17984-1-git-send-email-lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org>
2014-09-05 17:34 ` [PATCH v9 6/8] drivers: cpuidle: CPU idle ARM64 driver Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-08 16:08 ` Catalin Marinas
2014-09-08 16:08 ` Catalin Marinas
2014-09-05 17:34 ` [PATCH v9 7/8] drivers: cpuidle: initialize big.LITTLE driver through DT Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
2014-09-05 17:34 ` [PATCH v9 8/8] drivers: cpuidle: initialize Exynos " Lorenzo Pieralisi
2014-09-05 17:34 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409938498-17984-6-git-send-email-lorenzo.pieralisi@arm.com \
--to=lorenzo.pieralisi@arm.com \
--cc=Charles.Garcia-Tobin@arm.com \
--cc=amit.kucheria@linaro.org \
--cc=ananaza@iki.fi \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=k.chander@samsung.com \
--cc=khilman@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-pm@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nico@linaro.org \
--cc=paul@pwsan.com \
--cc=pdeschrijver@nvidia.com \
--cc=robh+dt@kernel.org \
--cc=santosh.shilimkar@ti.com \
--cc=sboyd@codeaurora.org \
--cc=sebcape@gmail.com \
--cc=sudeep.holla@arm.com \
--cc=vincent.guittot@linaro.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.