From: Bjorn Andersson <bjorn.andersson@sonymobile.com> To: Linus Walleij <linus.walleij@linaro.org>, "Ivan T. Ivanov" <ivan.ivanov@linaro.org> Cc: <linux-gpio@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-msm@vger.kernel.org> Subject: [PATCH 3/8] pinctrl: qcom: spmi-mpp: Introduce defines for MODE_CTL Date: Wed, 17 Jun 2015 23:47:27 -0700 [thread overview] Message-ID: <1434610052-602-4-git-send-email-bjorn.andersson@sonymobile.com> (raw) In-Reply-To: <1434610052-602-1-git-send-email-bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> --- drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 6d9abeea810d..745c37dea7d0 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -85,6 +85,14 @@ #define PMIC_MPP_REG_AIN_ROUTE_SHIFT 0 #define PMIC_MPP_REG_AIN_ROUTE_MASK 0x7 +#define PMIC_MPP_MODE_DIGITAL_INPUT 0 +#define PMIC_MPP_MODE_DIGITAL_OUTPUT 1 +#define PMIC_MPP_MODE_DIGITAL_BIDIR 2 +#define PMIC_MPP_MODE_ANALOG_BIDIR 3 +#define PMIC_MPP_MODE_ANALOG_INPUT 4 +#define PMIC_MPP_MODE_ANALOG_OUTPUT 5 +#define PMIC_MPP_MODE_CURRENT_SINK 6 + #define PMIC_MPP_PHYSICAL_OFFSET 1 /* Qualcomm specific pin configurations */ @@ -248,20 +256,20 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, pad->function = function; if (!pad->analog_mode) { - val = 0; /* just digital input */ + val = PMIC_MPP_MODE_DIGITAL_INPUT; if (pad->output_enabled) { if (pad->input_enabled) - val = 2; /* digital input and output */ + val = PMIC_MPP_MODE_DIGITAL_BIDIR; else - val = 1; /* just digital output */ + val = PMIC_MPP_MODE_DIGITAL_OUTPUT; } } else { - val = 4; /* just analog input */ + val = PMIC_MPP_MODE_ANALOG_INPUT; if (pad->output_enabled) { if (pad->input_enabled) - val = 3; /* analog input and output */ + val = PMIC_MPP_MODE_ANALOG_BIDIR; else - val = 5; /* just analog output */ + val = PMIC_MPP_MODE_ANALOG_OUTPUT; } } @@ -654,32 +662,32 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state, dir &= PMIC_MPP_REG_MODE_DIR_MASK; switch (dir) { - case 0: + case PMIC_MPP_MODE_DIGITAL_INPUT: pad->input_enabled = true; pad->output_enabled = false; pad->analog_mode = false; break; - case 1: + case PMIC_MPP_MODE_DIGITAL_OUTPUT: pad->input_enabled = false; pad->output_enabled = true; pad->analog_mode = false; break; - case 2: + case PMIC_MPP_MODE_DIGITAL_BIDIR: pad->input_enabled = true; pad->output_enabled = true; pad->analog_mode = false; break; - case 3: + case PMIC_MPP_MODE_ANALOG_BIDIR: pad->input_enabled = true; pad->output_enabled = true; pad->analog_mode = true; break; - case 4: + case PMIC_MPP_MODE_ANALOG_INPUT: pad->input_enabled = true; pad->output_enabled = false; pad->analog_mode = true; break; - case 5: + case PMIC_MPP_MODE_ANALOG_OUTPUT: pad->input_enabled = false; pad->output_enabled = true; pad->analog_mode = true; -- 1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@sonymobile.com> To: Linus Walleij <linus.walleij@linaro.org>, "Ivan T. Ivanov" <ivan.ivanov@linaro.org> Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Subject: [PATCH 3/8] pinctrl: qcom: spmi-mpp: Introduce defines for MODE_CTL Date: Wed, 17 Jun 2015 23:47:27 -0700 [thread overview] Message-ID: <1434610052-602-4-git-send-email-bjorn.andersson@sonymobile.com> (raw) In-Reply-To: <1434610052-602-1-git-send-email-bjorn.andersson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> --- drivers/pinctrl/qcom/pinctrl-spmi-mpp.c | 32 ++++++++++++++++++++------------ 1 file changed, 20 insertions(+), 12 deletions(-) diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 6d9abeea810d..745c37dea7d0 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -85,6 +85,14 @@ #define PMIC_MPP_REG_AIN_ROUTE_SHIFT 0 #define PMIC_MPP_REG_AIN_ROUTE_MASK 0x7 +#define PMIC_MPP_MODE_DIGITAL_INPUT 0 +#define PMIC_MPP_MODE_DIGITAL_OUTPUT 1 +#define PMIC_MPP_MODE_DIGITAL_BIDIR 2 +#define PMIC_MPP_MODE_ANALOG_BIDIR 3 +#define PMIC_MPP_MODE_ANALOG_INPUT 4 +#define PMIC_MPP_MODE_ANALOG_OUTPUT 5 +#define PMIC_MPP_MODE_CURRENT_SINK 6 + #define PMIC_MPP_PHYSICAL_OFFSET 1 /* Qualcomm specific pin configurations */ @@ -248,20 +256,20 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, pad->function = function; if (!pad->analog_mode) { - val = 0; /* just digital input */ + val = PMIC_MPP_MODE_DIGITAL_INPUT; if (pad->output_enabled) { if (pad->input_enabled) - val = 2; /* digital input and output */ + val = PMIC_MPP_MODE_DIGITAL_BIDIR; else - val = 1; /* just digital output */ + val = PMIC_MPP_MODE_DIGITAL_OUTPUT; } } else { - val = 4; /* just analog input */ + val = PMIC_MPP_MODE_ANALOG_INPUT; if (pad->output_enabled) { if (pad->input_enabled) - val = 3; /* analog input and output */ + val = PMIC_MPP_MODE_ANALOG_BIDIR; else - val = 5; /* just analog output */ + val = PMIC_MPP_MODE_ANALOG_OUTPUT; } } @@ -654,32 +662,32 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state, dir &= PMIC_MPP_REG_MODE_DIR_MASK; switch (dir) { - case 0: + case PMIC_MPP_MODE_DIGITAL_INPUT: pad->input_enabled = true; pad->output_enabled = false; pad->analog_mode = false; break; - case 1: + case PMIC_MPP_MODE_DIGITAL_OUTPUT: pad->input_enabled = false; pad->output_enabled = true; pad->analog_mode = false; break; - case 2: + case PMIC_MPP_MODE_DIGITAL_BIDIR: pad->input_enabled = true; pad->output_enabled = true; pad->analog_mode = false; break; - case 3: + case PMIC_MPP_MODE_ANALOG_BIDIR: pad->input_enabled = true; pad->output_enabled = true; pad->analog_mode = true; break; - case 4: + case PMIC_MPP_MODE_ANALOG_INPUT: pad->input_enabled = true; pad->output_enabled = false; pad->analog_mode = true; break; - case 5: + case PMIC_MPP_MODE_ANALOG_OUTPUT: pad->input_enabled = false; pad->output_enabled = true; pad->analog_mode = true; -- 1.8.2.2
next prev parent reply other threads:[~2015-06-18 6:53 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2015-06-18 6:47 [PATCH 0/8] Qualcomm PMIC pinctrl additions Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-06-18 6:47 ` [PATCH 1/8] pinctrl: qcom: spmi-mpp: Transition to generic dt binding parser Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-07-14 10:56 ` Linus Walleij 2015-06-18 6:47 ` [PATCH 2/8] pinctrl: qcom: spmi-mpp: Fixes related to enable handling Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-07-14 10:57 ` Linus Walleij 2015-06-18 6:47 ` Bjorn Andersson [this message] 2015-06-18 6:47 ` [PATCH 3/8] pinctrl: qcom: spmi-mpp: Introduce defines for MODE_CTL Bjorn Andersson 2015-07-14 10:58 ` Linus Walleij 2015-06-18 6:47 ` [PATCH 4/8] pinctrl: qcom: spmi-mpp: Implement support for sink mode Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-07-14 11:01 ` Linus Walleij 2015-06-18 6:47 ` [PATCH 5/8] pinctrl: qcom: spmi-mpp: Add support for setting analog output level Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-06-24 8:17 ` Ivan T. Ivanov 2015-07-14 11:04 ` Linus Walleij 2015-07-15 6:40 ` [PATCH v2 " Bjorn Andersson 2015-07-15 6:40 ` Bjorn Andersson 2015-07-17 12:30 ` Linus Walleij 2015-06-18 6:47 ` [PATCH 6/8] pinctrl: qcom: spmi-mpp: Transpose pinmux function Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-07-17 12:31 ` Linus Walleij 2015-06-18 6:47 ` [PATCH 7/8] mfd: pm8921: Implement irq_get_irqchip_state Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-06-18 7:32 ` Marc Zyngier 2015-06-18 16:37 ` Bjorn Andersson 2015-07-15 6:40 ` [PATCH v2 " Bjorn Andersson 2015-07-15 6:40 ` Bjorn Andersson 2015-07-17 12:33 ` Linus Walleij 2015-07-17 19:54 ` Linus Walleij 2015-07-17 12:44 ` Marc Zyngier 2015-07-23 14:47 ` Lee Jones 2015-06-18 6:47 ` [PATCH 8/8] pinctrl: qcom: ssbi: Family A gpio & mpp drivers Bjorn Andersson 2015-06-18 6:47 ` Bjorn Andersson 2015-06-24 8:17 ` Ivan T. Ivanov 2015-06-24 19:54 ` Srinivas Kandagatla 2015-07-15 6:40 ` [PATCH v2 " Bjorn Andersson 2015-07-15 6:40 ` Bjorn Andersson 2015-07-17 12:35 ` Linus Walleij 2015-06-24 8:29 ` [PATCH 0/8] Qualcomm PMIC pinctrl additions Ivan T. Ivanov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1434610052-602-4-git-send-email-bjorn.andersson@sonymobile.com \ --to=bjorn.andersson@sonymobile.com \ --cc=ivan.ivanov@linaro.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.