From: Hannes Reinecke <hare@suse.de>
To: Nic Bellinger <nab@daterainc.com>
Cc: target-devel@vger.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig <hch@lst.de>, Ewan Milne <emilne@redhat.com>,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH 2/8] tcm_loop: Add SAS transport topology
Date: Thu, 18 Jun 2015 11:43:36 +0200 [thread overview]
Message-ID: <1434620622-65391-3-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1434620622-65391-1-git-send-email-hare@suse.de>
As tcm_loop emulates a SAS HBA it should not only
attach to the SAS transport template but also
populate the SAS device hierarchy.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/target/loopback/tcm_loop.c | 139 ++++++++++++++++++++++++++++++++-----
drivers/target/loopback/tcm_loop.h | 3 +
2 files changed, 125 insertions(+), 17 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 45ae3e4..7d436db 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -439,6 +439,9 @@ static int tcm_loop_driver_remove(struct device *dev)
tl_hba = to_tcm_loop_hba(dev);
sh = tl_hba->sh;
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS)
+ sas_remove_host(sh);
+
scsi_remove_host(sh);
scsi_host_put(sh);
return 0;
@@ -729,10 +732,18 @@ static int tcm_loop_port_link(
struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba;
atomic_inc_mb(&tl_tpg->tl_tpg_port_count);
- /*
- * Add Linux/SCSI struct scsi_device by HCTL
- */
- scsi_add_device(tl_hba->sh, 0, tl_tpg->tl_tpgt, lun->unpacked_lun);
+ if (tl_hba->tl_proto_id != SCSI_PROTOCOL_SAS) {
+ /*
+ * Add Linux/SCSI struct scsi_device by HCTL
+ */
+ scsi_add_device(tl_hba->sh, 0,
+ tl_tpg->tl_tpgt, lun->unpacked_lun);
+ } else {
+ struct sas_rphy *rphy = tl_tpg->sas_rphy;
+
+ scsi_scan_target(&rphy->dev, 0, rphy->scsi_target_id,
+ lun->unpacked_lun, 0);
+ }
pr_debug("TCM_Loop_ConfigFS: Port Link Successful\n");
return 0;
@@ -749,19 +760,21 @@ static void tcm_loop_port_unlink(
tl_tpg = container_of(se_tpg, struct tcm_loop_tpg, tl_se_tpg);
tl_hba = tl_tpg->tl_hba;
- sd = scsi_device_lookup(tl_hba->sh, 0, tl_tpg->tl_tpgt,
- se_lun->unpacked_lun);
- if (!sd) {
- pr_err("Unable to locate struct scsi_device for %d:%d:"
- "%llu\n", 0, tl_tpg->tl_tpgt, se_lun->unpacked_lun);
- return;
+ if (tl_hba->tl_proto_id != SCSI_PROTOCOL_SAS) {
+ sd = scsi_device_lookup(tl_hba->sh, 0, tl_tpg->tl_tpgt,
+ se_lun->unpacked_lun);
+ if (!sd) {
+ pr_err("Unable to locate struct scsi_device for %d:%d:"
+ "%llu\n", 0, tl_tpg->tl_tpgt,
+ se_lun->unpacked_lun);
+ return;
+ }
+ /*
+ * Remove Linux/SCSI struct scsi_device by HCTL
+ */
+ scsi_remove_device(sd);
+ scsi_device_put(sd);
}
- /*
- * Remove Linux/SCSI struct scsi_device by HCTL
- */
- scsi_remove_device(sd);
- scsi_device_put(sd);
-
atomic_dec_mb(&tl_tpg->tl_tpg_port_count);
pr_debug("TCM_Loop_ConfigFS: Port Unlink Successful\n");
@@ -858,6 +871,33 @@ static int tcm_loop_make_nexus(
pr_debug("TCM_Loop_ConfigFS: Established I_T Nexus to emulated"
" %s Initiator Port: %s\n", tcm_loop_dump_proto_id(tl_hba),
name);
+
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS) {
+ struct Scsi_Host *sh = tl_hba->sh;
+ u64 sas_address;
+
+ if (kstrtoull(name, 16, &sas_address)) {
+ pr_err("Invalid SAS address %s\n", name);
+ return -ENODEV;
+ }
+ tl_nexus->sas_phy = sas_phy_alloc(&sh->shost_gendev,
+ tl_tpg->tl_tpgt);
+ if (!tl_nexus->sas_phy) {
+ pr_err("Unable to allocate SAS host phy\n");
+ return -ENOMEM;
+ }
+ tl_nexus->sas_phy->identify.sas_address = sas_address;
+ tl_nexus->sas_phy->identify.phy_identifier = 0;
+ tl_nexus->sas_phy->identify.device_type = SAS_END_DEVICE;
+ tl_nexus->sas_phy->identify.initiator_port_protocols = SAS_PROTOCOL_STP|SAS_PROTOCOL_SMP;
+ if (sas_phy_add(tl_nexus->sas_phy)) {
+ sas_phy_free(tl_nexus->sas_phy);
+ tl_nexus->sas_phy = NULL;
+ pr_err("Unable to add SAS host phy\n");
+ return -ENODEV;
+ }
+ sas_port_add_phy(tl_tpg->sas_port, tl_nexus->sas_phy);
+ }
return 0;
out:
@@ -886,6 +926,13 @@ static int tcm_loop_drop_nexus(
return -EPERM;
}
+ if (tl_nexus->sas_phy) {
+ sas_port_delete_phy(tpg->sas_port, tl_nexus->sas_phy);
+ sas_phy_delete(tl_nexus->sas_phy);
+ sas_phy_free(tl_nexus->sas_phy);
+ tl_nexus->sas_phy = NULL;
+ }
+
pr_debug("TCM_Loop_ConfigFS: Removing I_T Nexus to emulated"
" %s Initiator Port: %s\n", tcm_loop_dump_proto_id(tpg->tl_hba),
tl_nexus->se_sess->se_node_acl->initiatorname);
@@ -956,7 +1003,7 @@ static ssize_t tcm_loop_tpg_store_nexus(
tcm_loop_dump_proto_id(tl_hba));
return -EINVAL;
}
- port_ptr = &i_port[0];
+ port_ptr = &i_port[4];
goto check_newline;
}
ptr = strstr(i_port, "fc.");
@@ -1089,6 +1136,48 @@ static struct se_portal_group *tcm_loop_make_naa_tpg(
if (ret < 0)
return ERR_PTR(-ENOMEM);
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS) {
+ struct Scsi_Host *sh = tl_hba->sh;
+ u64 sas_address;
+
+ tl_tpg->sas_port = sas_port_alloc(&sh->shost_gendev, tpgt);
+ if (!tl_tpg->sas_port) {
+ pr_err("Unable to allocate SAS port %ld\n", tpgt);
+ return ERR_PTR(-ENOMEM);
+ }
+ if ((sas_port_add(tl_tpg->sas_port))) {
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ pr_err("Unable to add SAS port %ld\n", tpgt);
+ return ERR_PTR(-ENODEV);
+ }
+ if (kstrtoull(tl_hba->tl_wwn_address, 16, &sas_address)) {
+ pr_err("Invalid SAS address %s\n",
+ tl_hba->tl_wwn_address);
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ return ERR_PTR(-ENODEV);
+ }
+ tl_tpg->sas_rphy = sas_end_device_alloc(tl_tpg->sas_port);
+ if (!tl_tpg->sas_rphy) {
+ pr_err("Unable to allocate SAS end device\n");
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ return ERR_PTR(-ENOMEM);
+ }
+ tl_tpg->sas_rphy->identify.sas_address = sas_address;
+ tl_tpg->sas_rphy->identify.phy_identifier = 0;
+ tl_tpg->sas_rphy->identify.device_type = SAS_END_DEVICE;
+ tl_tpg->sas_rphy->identify.target_port_protocols = SAS_PROTOCOL_STP|SAS_PROTOCOL_SMP;
+ if (sas_rphy_add(tl_tpg->sas_rphy)) {
+ sas_rphy_free(tl_tpg->sas_rphy);
+ tl_tpg->sas_rphy = NULL;
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ pr_err("Unable to add SAS target phy\n");
+ return ERR_PTR(-ENODEV);
+ }
+ }
pr_debug("TCM_Loop_ConfigFS: Allocated Emulated %s"
" Target Port %s,t,0x%04lx\n", tcm_loop_dump_proto_id(tl_hba),
config_item_name(&wwn->wwn_group.cg_item), tpgt);
@@ -1107,10 +1196,25 @@ static void tcm_loop_drop_naa_tpg(
tl_hba = tl_tpg->tl_hba;
tpgt = tl_tpg->tl_tpgt;
+
+ if (tl_hba->tl_proto_id == SCSI_PROTOCOL_SAS)
+ sas_rphy_delete(tl_tpg->sas_rphy);
+
/*
* Release the I_T Nexus for the Virtual SAS link if present
*/
tcm_loop_drop_nexus(tl_tpg);
+
+ if (tl_tpg->sas_rphy) {
+ sas_rphy_delete(tl_tpg->sas_rphy);
+ tl_tpg->sas_rphy = NULL;
+ }
+
+ if (tl_tpg->sas_port) {
+ sas_port_free(tl_tpg->sas_port);
+ tl_tpg->sas_port = NULL;
+ }
+
/*
* Deregister the tl_tpg as a emulated SAS TCM Target Endpoint
*/
@@ -1150,6 +1254,7 @@ static struct se_wwn *tcm_loop_make_scsi_hba(
ptr = strstr(name, "naa.");
if (ptr) {
tl_hba->tl_proto_id = SCSI_PROTOCOL_SAS;
+ off = 4; /* Skip over "naa." */
goto check_len;
}
ptr = strstr(name, "fc.");
diff --git a/drivers/target/loopback/tcm_loop.h b/drivers/target/loopback/tcm_loop.h
index 4346462..2d4c22d 100644
--- a/drivers/target/loopback/tcm_loop.h
+++ b/drivers/target/loopback/tcm_loop.h
@@ -26,6 +26,7 @@ struct tcm_loop_nexus {
* Pointer to TCM session for I_T Nexus
*/
struct se_session *se_sess;
+ struct sas_phy *sas_phy;
};
#define TCM_TRANSPORT_ONLINE 0
@@ -39,6 +40,8 @@ struct tcm_loop_tpg {
struct se_portal_group tl_se_tpg;
struct tcm_loop_hba *tl_hba;
struct tcm_loop_nexus *tl_nexus;
+ struct sas_port *sas_port;
+ struct sas_rphy *sas_rphy;
};
struct tcm_loop_hba {
--
1.8.5.2
next prev parent reply other threads:[~2015-06-18 9:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 9:43 [PATCH 0/8] tcm_loop updates Hannes Reinecke
2015-06-18 9:43 ` [PATCH 1/8] tcm_loop: Hook into SAS transport class Hannes Reinecke
2015-06-18 9:43 ` Hannes Reinecke [this message]
2015-06-18 9:43 ` [PATCH 3/8] tcm_loop: Remove SAS vestigies Hannes Reinecke
2015-06-18 9:43 ` [PATCH 4/8] tcm_loop: Send I_T_NEXUS_LOSS_OCCURRED UA Hannes Reinecke
2015-06-18 9:43 ` [PATCH 5/8] tcm_loop: Rescan SCSI target on transport online Hannes Reinecke
2015-06-18 9:43 ` [PATCH 6/8] target: Issue Power-On/Reset UA upon LUN instantiation Hannes Reinecke
2015-06-18 9:43 ` [PATCH 7/8] target_core_alua: disallow READ_CAPACITY when in standby Hannes Reinecke
2015-06-18 11:40 ` Chris Boot
2015-06-18 14:32 ` Hannes Reinecke
2015-06-19 6:49 ` Christoph Hellwig
2015-06-19 7:07 ` Hannes Reinecke
2015-06-18 9:43 ` [PATCH 8/8] target: display 'write_protect' attribute for demo-mode LUNs Hannes Reinecke
2015-06-19 6:51 ` Christoph Hellwig
2015-06-19 7:05 ` Hannes Reinecke
2015-06-19 6:48 ` [PATCH 0/8] tcm_loop updates Christoph Hellwig
2015-06-19 7:13 ` Hannes Reinecke
2015-06-23 8:29 ` Nicholas A. Bellinger
2015-06-23 9:05 ` Hannes Reinecke
2015-07-07 0:25 ` Nicholas A. Bellinger
2015-07-07 5:50 ` Hannes Reinecke
2015-07-07 6:26 ` Nicholas A. Bellinger
2015-07-07 6:29 ` Hannes Reinecke
2015-07-07 6:42 ` Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434620622-65391-3-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=emilne@redhat.com \
--cc=hch@lst.de \
--cc=linux-scsi@vger.kernel.org \
--cc=nab@daterainc.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.