From: Hannes Reinecke <hare@suse.de>
To: Nic Bellinger <nab@daterainc.com>
Cc: target-devel@vger.kernel.org, linux-scsi@vger.kernel.org,
Christoph Hellwig <hch@lst.de>, Ewan Milne <emilne@redhat.com>,
Hannes Reinecke <hare@suse.de>
Subject: [PATCH 3/8] tcm_loop: Remove SAS vestigies
Date: Thu, 18 Jun 2015 11:43:37 +0200 [thread overview]
Message-ID: <1434620622-65391-4-git-send-email-hare@suse.de> (raw)
In-Reply-To: <1434620622-65391-1-git-send-email-hare@suse.de>
tcm_loop is able to emulate several protocols, so remove last
vestigies of the SAS protocol.
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
drivers/target/loopback/tcm_loop.c | 17 +++++++++--------
1 file changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 7d436db..d77caf5 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -535,7 +535,7 @@ static inline struct tcm_loop_tpg *tl_tpg(struct se_portal_group *se_tpg)
static char *tcm_loop_get_endpoint_wwn(struct se_portal_group *se_tpg)
{
/*
- * Return the passed NAA identifier for the SAS Target Port
+ * Return the passed NAA identifier for the Target Port
*/
return &tl_tpg(se_tpg)->tl_hba->tl_wwn_address[0];
}
@@ -864,7 +864,7 @@ static int tcm_loop_make_nexus(
transport_free_session(tl_nexus->se_sess);
goto out;
}
- /* Now, register the SAS I_T Nexus as active. */
+ /* Now, register the I_T Nexus as active. */
transport_register_session(se_tpg, tl_nexus->se_sess->se_node_acl,
tl_nexus->se_sess, tl_nexus);
tl_tpg->tl_nexus = tl_nexus;
@@ -937,7 +937,7 @@ static int tcm_loop_drop_nexus(
" %s Initiator Port: %s\n", tcm_loop_dump_proto_id(tpg->tl_hba),
tl_nexus->se_sess->se_node_acl->initiatorname);
/*
- * Release the SCSI I_T Nexus to the emulated SAS Target Port
+ * Release the SCSI I_T Nexus to the emulated Target Port
*/
transport_deregister_session(tl_nexus->se_sess);
tpg->tl_nexus = NULL;
@@ -1130,7 +1130,7 @@ static struct se_portal_group *tcm_loop_make_naa_tpg(
tl_tpg->tl_hba = tl_hba;
tl_tpg->tl_tpgt = tpgt;
/*
- * Register the tl_tpg as a emulated SAS TCM Target Endpoint
+ * Register the tl_tpg as a emulated TCM Target Endpoint
*/
ret = core_tpg_register(wwn, &tl_tpg->tl_se_tpg, tl_hba->tl_proto_id);
if (ret < 0)
@@ -1201,7 +1201,7 @@ static void tcm_loop_drop_naa_tpg(
sas_rphy_delete(tl_tpg->sas_rphy);
/*
- * Release the I_T Nexus for the Virtual SAS link if present
+ * Release the I_T Nexus for the Virtual target link if present
*/
tcm_loop_drop_nexus(tl_tpg);
@@ -1216,7 +1216,7 @@ static void tcm_loop_drop_naa_tpg(
}
/*
- * Deregister the tl_tpg as a emulated SAS TCM Target Endpoint
+ * Deregister the tl_tpg as a emulated TCM Target Endpoint
*/
core_tpg_deregister(se_tpg);
@@ -1310,8 +1310,9 @@ static void tcm_loop_drop_scsi_hba(
struct tcm_loop_hba, tl_hba_wwn);
pr_debug("TCM_Loop_ConfigFS: Deallocating emulated Target"
- " SAS Address: %s at Linux/SCSI Host ID: %d\n",
- tl_hba->tl_wwn_address, tl_hba->sh->host_no);
+ " %s Address: %s at Linux/SCSI Host ID: %d\n",
+ tcm_loop_dump_proto_id(tl_hba), tl_hba->tl_wwn_address,
+ tl_hba->sh->host_no);
/*
* Call device_unregister() on the original tl_hba->dev.
* tcm_loop_fabric_scsi.c:tcm_loop_release_adapter() will
--
1.8.5.2
next prev parent reply other threads:[~2015-06-18 9:43 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 9:43 [PATCH 0/8] tcm_loop updates Hannes Reinecke
2015-06-18 9:43 ` [PATCH 1/8] tcm_loop: Hook into SAS transport class Hannes Reinecke
2015-06-18 9:43 ` [PATCH 2/8] tcm_loop: Add SAS transport topology Hannes Reinecke
2015-06-18 9:43 ` Hannes Reinecke [this message]
2015-06-18 9:43 ` [PATCH 4/8] tcm_loop: Send I_T_NEXUS_LOSS_OCCURRED UA Hannes Reinecke
2015-06-18 9:43 ` [PATCH 5/8] tcm_loop: Rescan SCSI target on transport online Hannes Reinecke
2015-06-18 9:43 ` [PATCH 6/8] target: Issue Power-On/Reset UA upon LUN instantiation Hannes Reinecke
2015-06-18 9:43 ` [PATCH 7/8] target_core_alua: disallow READ_CAPACITY when in standby Hannes Reinecke
2015-06-18 11:40 ` Chris Boot
2015-06-18 14:32 ` Hannes Reinecke
2015-06-19 6:49 ` Christoph Hellwig
2015-06-19 7:07 ` Hannes Reinecke
2015-06-18 9:43 ` [PATCH 8/8] target: display 'write_protect' attribute for demo-mode LUNs Hannes Reinecke
2015-06-19 6:51 ` Christoph Hellwig
2015-06-19 7:05 ` Hannes Reinecke
2015-06-19 6:48 ` [PATCH 0/8] tcm_loop updates Christoph Hellwig
2015-06-19 7:13 ` Hannes Reinecke
2015-06-23 8:29 ` Nicholas A. Bellinger
2015-06-23 9:05 ` Hannes Reinecke
2015-07-07 0:25 ` Nicholas A. Bellinger
2015-07-07 5:50 ` Hannes Reinecke
2015-07-07 6:26 ` Nicholas A. Bellinger
2015-07-07 6:29 ` Hannes Reinecke
2015-07-07 6:42 ` Nicholas A. Bellinger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434620622-65391-4-git-send-email-hare@suse.de \
--to=hare@suse.de \
--cc=emilne@redhat.com \
--cc=hch@lst.de \
--cc=linux-scsi@vger.kernel.org \
--cc=nab@daterainc.com \
--cc=target-devel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.