From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 04/12] target-arm/helper.c: define MPUIR register
Date: Fri, 19 Jun 2015 14:47:08 +0100 [thread overview]
Message-ID: <1434721636-25357-5-git-send-email-peter.maydell@linaro.org> (raw)
In-Reply-To: <1434721636-25357-1-git-send-email-peter.maydell@linaro.org>
From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Define the MPUIR register for MPU supporting ARMv6 and onwards.
Currently we only support unified MPU.
The size of the unified MPU is defined via the number of "dregions".
So just a single config is added to specify this size. (When split MPU
is implemented we will add an extra iregions config).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 9f248950b803a08c8b3c978931663182f7e882e7.1434501320.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target-arm/cpu-qom.h | 2 ++
target-arm/cpu.c | 18 ++++++++++++++++++
target-arm/helper.c | 10 ++++++++++
3 files changed, 30 insertions(+)
diff --git a/target-arm/cpu-qom.h b/target-arm/cpu-qom.h
index 072aa9b..3cbc4a0 100644
--- a/target-arm/cpu-qom.h
+++ b/target-arm/cpu-qom.h
@@ -105,6 +105,8 @@ typedef struct ARMCPU {
/* CPU has memory protection unit */
bool has_mpu;
+ /* PMSAv7 MPU number of supported regions */
+ uint32_t pmsav7_dregion;
/* PSCI conduit used to invoke PSCI methods
* 0 - disabled, 1 - smc, 2 - hvc
diff --git a/target-arm/cpu.c b/target-arm/cpu.c
index a6e3e37..a04d5c3 100644
--- a/target-arm/cpu.c
+++ b/target-arm/cpu.c
@@ -457,6 +457,9 @@ static Property arm_cpu_has_el3_property =
static Property arm_cpu_has_mpu_property =
DEFINE_PROP_BOOL("has-mpu", ARMCPU, has_mpu, true);
+static Property arm_cpu_pmsav7_dregion_property =
+ DEFINE_PROP_UINT32("pmsav7-dregion", ARMCPU, pmsav7_dregion, 16);
+
static void arm_cpu_post_init(Object *obj)
{
ARMCPU *cpu = ARM_CPU(obj);
@@ -488,6 +491,11 @@ static void arm_cpu_post_init(Object *obj)
if (arm_feature(&cpu->env, ARM_FEATURE_MPU)) {
qdev_property_add_static(DEVICE(obj), &arm_cpu_has_mpu_property,
&error_abort);
+ if (arm_feature(&cpu->env, ARM_FEATURE_V7)) {
+ qdev_property_add_static(DEVICE(obj),
+ &arm_cpu_pmsav7_dregion_property,
+ &error_abort);
+ }
}
}
@@ -580,6 +588,16 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
unset_feature(env, ARM_FEATURE_MPU);
}
+ if (arm_feature(env, ARM_FEATURE_MPU) &&
+ arm_feature(env, ARM_FEATURE_V7)) {
+ uint32_t nr = cpu->pmsav7_dregion;
+
+ if (nr > 0xff) {
+ error_setg(errp, "PMSAv7 MPU #regions invalid %" PRIu32 "\n", nr);
+ return;
+ }
+ }
+
register_cp_regs_for_features(cpu);
arm_cpu_register_gdb_regs_for_features(cpu);
diff --git a/target-arm/helper.c b/target-arm/helper.c
index fbf20b6..1cb8812 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -3457,6 +3457,13 @@ void register_cp_regs_for_features(ARMCPU *cpu)
.cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 3,
.access = PL1_R, .type = ARM_CP_CONST, .resetvalue = 0,
};
+ /* MPUIR is specific to PMSA V6+ */
+ ARMCPRegInfo id_mpuir_reginfo = {
+ .name = "MPUIR",
+ .cp = 15, .crn = 0, .crm = 0, .opc1 = 0, .opc2 = 4,
+ .access = PL1_R, .type = ARM_CP_CONST,
+ .resetvalue = cpu->pmsav7_dregion << 8
+ };
ARMCPRegInfo crn0_wi_reginfo = {
.name = "CRN0_WI", .cp = 15, .crn = 0, .crm = CP_ANY,
.opc1 = CP_ANY, .opc2 = CP_ANY, .access = PL1_W,
@@ -3479,6 +3486,7 @@ void register_cp_regs_for_features(ARMCPU *cpu)
r->access = PL1_RW;
}
id_tlbtr_reginfo.access = PL1_RW;
+ id_tlbtr_reginfo.access = PL1_RW;
}
if (arm_feature(env, ARM_FEATURE_V8)) {
define_arm_cp_regs(cpu, id_v8_midr_cp_reginfo);
@@ -3488,6 +3496,8 @@ void register_cp_regs_for_features(ARMCPU *cpu)
define_arm_cp_regs(cpu, id_cp_reginfo);
if (!arm_feature(env, ARM_FEATURE_MPU)) {
define_one_arm_cp_reg(cpu, &id_tlbtr_reginfo);
+ } else if (arm_feature(env, ARM_FEATURE_V7)) {
+ define_one_arm_cp_reg(cpu, &id_mpuir_reginfo);
}
}
--
1.9.1
next prev parent reply other threads:[~2015-06-19 13:47 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-19 13:47 [Qemu-devel] [PULL 00/12] target-arm queue Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 01/12] target-arm: Add the Cortex-M4 CPU Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 02/12] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 03/12] target-arm: Do not reset sysregs marked as ALIAS Peter Maydell
2015-06-19 13:47 ` Peter Maydell [this message]
2015-06-19 13:47 ` [Qemu-devel] [PULL 05/12] target-arm: Add registers for PMSAv7 Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 06/12] target-arm: Implement PMSAv7 MPU Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 07/12] target-arm: Add support for Cortex-R5 Peter Maydell
2017-05-05 12:05 ` Philippe Mathieu-Daudé
2015-06-19 13:47 ` [Qemu-devel] [PULL 08/12] arm: xlnx-zynqmp: Preface CPU variables with "apu" Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 09/12] arm: xlnx-zynqmp: Add boot-cpu property Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 10/12] arm: xlnx-zynqmp: Add 2xCortexR5 CPUs Peter Maydell
2015-07-09 14:19 ` Paolo Bonzini
2015-06-19 13:47 ` [Qemu-devel] [PULL 11/12] semihosting: create SemihostingConfig structure and semihost.h Peter Maydell
2015-06-19 13:47 ` [Qemu-devel] [PULL 12/12] semihosting: add --semihosting-config arg sub-argument Peter Maydell
2015-06-19 17:32 ` [Qemu-devel] [PULL 00/12] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434721636-25357-5-git-send-email-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.