From: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
To: David Howells <dhowells@redhat.com>,
Johan Hovold <johan@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-am33-list@redhat.com, linux-kernel@vger.kernel.org,
linux-usb@vger.kernel.org,
Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Subject: [PATCH v3] USB: mos7720: rename registers
Date: Tue, 23 Jun 2015 18:59:40 +0530 [thread overview]
Message-ID: <1435066180-4964-1-git-send-email-sudipm.mukherjee@gmail.com> (raw)
In-Reply-To: <1434629873-11668-5-git-send-email-sudipm.mukherjee@gmail.com>
Some of the register names defined here are matching with registers
defined in other places. Like DCR is defined here and DCR is also
a register in mn10300 architecture. So when we are building this with
mn10300, build fails.
To avoid we rename all the registers.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
---
v3: renamed all registers with MOS7220_
v2: renamed only DCR
drivers/usb/serial/mos7720.c | 253 +++++++++++++++++++++++--------------------
1 file changed, 138 insertions(+), 115 deletions(-)
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 4f70df3..78b4f64 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -121,26 +121,26 @@ static DEFINE_SPINLOCK(release_lock);
static const unsigned int dummy; /* for clarity in register access fns */
enum mos_regs {
- THR, /* serial port regs */
- RHR,
- IER,
- FCR,
- ISR,
- LCR,
- MCR,
- LSR,
- MSR,
- SPR,
- DLL,
- DLM,
- DPR, /* parallel port regs */
- DSR,
- DCR,
- ECR,
- SP1_REG, /* device control regs */
- SP2_REG, /* serial port 2 (7720 only) */
- PP_REG,
- SP_CONTROL_REG,
+ MOS7720_THR, /* serial port regs */
+ MOS7720_RHR,
+ MOS7720_IER,
+ MOS7720_FCR,
+ MOS7720_ISR,
+ MOS7720_LCR,
+ MOS7720_MCR,
+ MOS7720_LSR,
+ MOS7720_MSR,
+ MOS7720_SPR,
+ MOS7720_DLL,
+ MOS7720_DLM,
+ MOS7720_DPR, /* parallel port regs */
+ MOS7720_DSR,
+ MOS7720_DCR,
+ MOS7720_ECR,
+ MOS7720_SP1_REG, /* device control regs */
+ MOS7720_SP2_REG, /* serial port 2 (7720 only) */
+ MOS7720_PP_REG,
+ MOS7720_SP_CONTROL_REG,
};
/*
@@ -150,26 +150,26 @@ enum mos_regs {
static inline __u16 get_reg_index(enum mos_regs reg)
{
static const __u16 mos7715_index_lookup_table[] = {
- 0x00, /* THR */
- 0x00, /* RHR */
- 0x01, /* IER */
- 0x02, /* FCR */
- 0x02, /* ISR */
- 0x03, /* LCR */
- 0x04, /* MCR */
- 0x05, /* LSR */
- 0x06, /* MSR */
- 0x07, /* SPR */
- 0x00, /* DLL */
- 0x01, /* DLM */
- 0x00, /* DPR */
- 0x01, /* DSR */
- 0x02, /* DCR */
- 0x0a, /* ECR */
- 0x01, /* SP1_REG */
- 0x02, /* SP2_REG (7720 only) */
- 0x04, /* PP_REG (7715 only) */
- 0x08, /* SP_CONTROL_REG */
+ 0x00, /* MOS7720_THR */
+ 0x00, /* MOS7720_RHR */
+ 0x01, /* MOS7720_IER */
+ 0x02, /* MOS7720_FCR */
+ 0x02, /* MOS7720_ISR */
+ 0x03, /* MOS7720_LCR */
+ 0x04, /* MOS7720_MCR */
+ 0x05, /* MOS7720_LSR */
+ 0x06, /* MOS7720_MSR */
+ 0x07, /* MOS7720_SPR */
+ 0x00, /* MOS7720_DLL */
+ 0x01, /* MOS7720_DLM */
+ 0x00, /* MOS7720_DPR */
+ 0x01, /* MOS7720_DSR */
+ 0x02, /* MOS7720_DCR */
+ 0x0a, /* MOS7720_ECR */
+ 0x01, /* MOS7720_SP1_REG */
+ 0x02, /* MOS7720_SP2_REG (7720 only) */
+ 0x04, /* MOS7720_PP_REG (7715 only) */
+ 0x08, /* MOS7720_SP_CONTROL_REG */
};
return mos7715_index_lookup_table[reg];
}
@@ -181,10 +181,10 @@ static inline __u16 get_reg_index(enum mos_regs reg)
static inline __u16 get_reg_value(enum mos_regs reg,
unsigned int serial_portnum)
{
- if (reg >= SP1_REG) /* control reg */
+ if (reg >= MOS7720_SP1_REG) /* control reg */
return 0x0000;
- else if (reg >= DPR) /* parallel port reg (7715 only) */
+ else if (reg >= MOS7720_DPR) /* parallel port reg (7715 only) */
return 0x0100;
else /* serial port reg */
@@ -252,7 +252,8 @@ static inline int mos7715_change_mode(struct mos7715_parport *mos_parport,
enum mos7715_pp_modes mode)
{
mos_parport->shadowECR = mode;
- write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+ mos_parport->shadowECR);
return 0;
}
@@ -486,7 +487,7 @@ static void parport_mos7715_write_data(struct parport *pp, unsigned char d)
if (parport_prologue(pp) < 0)
return;
mos7715_change_mode(mos_parport, SPP);
- write_mos_reg(mos_parport->serial, dummy, DPR, (__u8)d);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, (__u8)d);
parport_epilogue(pp);
}
@@ -497,7 +498,7 @@ static unsigned char parport_mos7715_read_data(struct parport *pp)
if (parport_prologue(pp) < 0)
return 0;
- read_mos_reg(mos_parport->serial, dummy, DPR, &d);
+ read_mos_reg(mos_parport->serial, dummy, MOS7720_DPR, &d);
parport_epilogue(pp);
return d;
}
@@ -510,7 +511,7 @@ static void parport_mos7715_write_control(struct parport *pp, unsigned char d)
if (parport_prologue(pp) < 0)
return;
data = ((__u8)d & 0x0f) | (mos_parport->shadowDCR & 0xf0);
- write_mos_reg(mos_parport->serial, dummy, DCR, data);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR, data);
mos_parport->shadowDCR = data;
parport_epilogue(pp);
}
@@ -543,7 +544,8 @@ static unsigned char parport_mos7715_frob_control(struct parport *pp,
if (parport_prologue(pp) < 0)
return 0;
mos_parport->shadowDCR = (mos_parport->shadowDCR & (~mask)) ^ val;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+ mos_parport->shadowDCR);
dcr = mos_parport->shadowDCR & 0x0f;
parport_epilogue(pp);
return dcr;
@@ -581,7 +583,8 @@ static void parport_mos7715_data_forward(struct parport *pp)
return;
mos7715_change_mode(mos_parport, PS2);
mos_parport->shadowDCR &= ~0x20;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+ mos_parport->shadowDCR);
parport_epilogue(pp);
}
@@ -593,7 +596,8 @@ static void parport_mos7715_data_reverse(struct parport *pp)
return;
mos7715_change_mode(mos_parport, PS2);
mos_parport->shadowDCR |= 0x20;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+ mos_parport->shadowDCR);
parport_epilogue(pp);
}
@@ -633,8 +637,10 @@ static void parport_mos7715_restore_state(struct parport *pp,
spin_unlock(&release_lock);
return;
}
- write_parport_reg_nonblock(mos_parport, DCR, mos_parport->shadowDCR);
- write_parport_reg_nonblock(mos_parport, ECR, mos_parport->shadowECR);
+ write_parport_reg_nonblock(mos_parport, MOS7720_DCR,
+ mos_parport->shadowDCR);
+ write_parport_reg_nonblock(mos_parport, MOS7720_ECR,
+ mos_parport->shadowECR);
spin_unlock(&release_lock);
}
@@ -714,14 +720,16 @@ static int mos7715_parport_init(struct usb_serial *serial)
init_completion(&mos_parport->syncmsg_compl);
/* cycle parallel port reset bit */
- write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x80);
- write_mos_reg(mos_parport->serial, dummy, PP_REG, (__u8)0x00);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x80);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_PP_REG, (__u8)0x00);
/* initialize device registers */
mos_parport->shadowDCR = DCR_INIT_VAL;
- write_mos_reg(mos_parport->serial, dummy, DCR, mos_parport->shadowDCR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_DCR,
+ mos_parport->shadowDCR);
mos_parport->shadowECR = ECR_INIT_VAL;
- write_mos_reg(mos_parport->serial, dummy, ECR, mos_parport->shadowECR);
+ write_mos_reg(mos_parport->serial, dummy, MOS7720_ECR,
+ mos_parport->shadowECR);
/* register with parport core */
mos_parport->pp = parport_register_port(0, PARPORT_IRQ_NONE,
@@ -1033,45 +1041,49 @@ static int mos7720_open(struct tty_struct *tty, struct usb_serial_port *port)
/* Initialize MCS7720 -- Write Init values to corresponding Registers
*
* Register Index
- * 0 : THR/RHR
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- * 5 : LSR
- * 6 : MSR
- * 7 : SPR
+ * 0 : MOS7720_THR/MOS7720_RHR
+ * 1 : MOS7720_IER
+ * 2 : MOS7720_FCR
+ * 3 : MOS7720_LCR
+ * 4 : MOS7720_MCR
+ * 5 : MOS7720_LSR
+ * 6 : MOS7720_MSR
+ * 7 : MOS7720_SPR
*
* 0x08 : SP1/2 Control Reg
*/
port_number = port->port_number;
- read_mos_reg(serial, port_number, LSR, &data);
+ read_mos_reg(serial, port_number, MOS7720_LSR, &data);
dev_dbg(&port->dev, "SS::%p LSR:%x\n", mos7720_port, data);
- write_mos_reg(serial, dummy, SP1_REG, 0x02);
- write_mos_reg(serial, dummy, SP2_REG, 0x02);
+ write_mos_reg(serial, dummy, MOS7720_SP1_REG, 0x02);
+ write_mos_reg(serial, dummy, MOS7720_SP2_REG, 0x02);
- write_mos_reg(serial, port_number, IER, 0x00);
- write_mos_reg(serial, port_number, FCR, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
- write_mos_reg(serial, port_number, FCR, 0xcf);
+ write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
mos7720_port->shadowLCR = 0x03;
- write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
mos7720_port->shadowMCR = 0x0b;
- write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+ write_mos_reg(serial, port_number, MOS7720_MCR,
+ mos7720_port->shadowMCR);
- write_mos_reg(serial, port_number, SP_CONTROL_REG, 0x00);
- read_mos_reg(serial, dummy, SP_CONTROL_REG, &data);
+ write_mos_reg(serial, port_number, MOS7720_SP_CONTROL_REG, 0x00);
+ read_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, &data);
data = data | (port->port_number + 1);
- write_mos_reg(serial, dummy, SP_CONTROL_REG, data);
+ write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, data);
mos7720_port->shadowLCR = 0x83;
- write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
- write_mos_reg(serial, port_number, THR, 0x0c);
- write_mos_reg(serial, port_number, IER, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
+ write_mos_reg(serial, port_number, MOS7720_THR, 0x0c);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
mos7720_port->shadowLCR = 0x03;
- write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
- write_mos_reg(serial, port_number, IER, 0x0c);
+ write_mos_reg(serial, port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
response = usb_submit_urb(port->read_urb, GFP_KERNEL);
if (response)
@@ -1144,8 +1156,8 @@ static void mos7720_close(struct usb_serial_port *port)
usb_kill_urb(port->write_urb);
usb_kill_urb(port->read_urb);
- write_mos_reg(serial, port->port_number, MCR, 0x00);
- write_mos_reg(serial, port->port_number, IER, 0x00);
+ write_mos_reg(serial, port->port_number, MOS7720_MCR, 0x00);
+ write_mos_reg(serial, port->port_number, MOS7720_IER, 0x00);
mos7720_port->open = 0;
}
@@ -1169,7 +1181,8 @@ static void mos7720_break(struct tty_struct *tty, int break_state)
data = mos7720_port->shadowLCR & ~UART_LCR_SBC;
mos7720_port->shadowLCR = data;
- write_mos_reg(serial, port->port_number, LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, port->port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
}
/*
@@ -1297,7 +1310,7 @@ static void mos7720_throttle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR &= ~UART_MCR_RTS;
- write_mos_reg(port->serial, port->port_number, MCR,
+ write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
}
}
@@ -1327,7 +1340,7 @@ static void mos7720_unthrottle(struct tty_struct *tty)
/* if we are implementing RTS/CTS, toggle that line */
if (tty->termios.c_cflag & CRTSCTS) {
mos7720_port->shadowMCR |= UART_MCR_RTS;
- write_mos_reg(port->serial, port->port_number, MCR,
+ write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
}
}
@@ -1352,35 +1365,39 @@ static int set_higher_rates(struct moschip_port *mos7720_port,
dev_dbg(&port->dev, "Sending Setting Commands ..........\n");
port_number = port->port_number;
- write_mos_reg(serial, port_number, IER, 0x00);
- write_mos_reg(serial, port_number, FCR, 0x00);
- write_mos_reg(serial, port_number, FCR, 0xcf);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
mos7720_port->shadowMCR = 0x0b;
- write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
- write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_MCR,
+ mos7720_port->shadowMCR);
+ write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x00);
/***********************************************
* Set for higher rates *
***********************************************/
/* writing baud rate verbatum into uart clock field clearly not right */
if (port_number == 0)
- sp_reg = SP1_REG;
+ sp_reg = MOS7720_SP1_REG;
else
- sp_reg = SP2_REG;
+ sp_reg = MOS7720_SP2_REG;
write_mos_reg(serial, dummy, sp_reg, baud * 0x10);
- write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x03);
+ write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG, 0x03);
mos7720_port->shadowMCR = 0x2b;
- write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+ write_mos_reg(serial, port_number, MOS7720_MCR,
+ mos7720_port->shadowMCR);
/***********************************************
* Set DLL/DLM
***********************************************/
mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
- write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
- write_mos_reg(serial, port_number, DLL, 0x01);
- write_mos_reg(serial, port_number, DLM, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
+ write_mos_reg(serial, port_number, MOS7720_DLL, 0x01);
+ write_mos_reg(serial, port_number, MOS7720_DLM, 0x00);
mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
- write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
return 0;
}
@@ -1488,15 +1505,16 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
/* Enable access to divisor latch */
mos7720_port->shadowLCR = mos7720_port->shadowLCR | UART_LCR_DLAB;
- write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
/* Write the divisor */
- write_mos_reg(serial, number, DLL, (__u8)(divisor & 0xff));
- write_mos_reg(serial, number, DLM, (__u8)((divisor & 0xff00) >> 8));
+ write_mos_reg(serial, number, MOS7720_DLL, (__u8)(divisor & 0xff));
+ write_mos_reg(serial, number, MOS7720_DLM,
+ (__u8)((divisor & 0xff00) >> 8));
/* Disable access to divisor latch */
mos7720_port->shadowLCR = mos7720_port->shadowLCR & ~UART_LCR_DLAB;
- write_mos_reg(serial, number, LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, number, MOS7720_LCR, mos7720_port->shadowLCR);
return status;
}
@@ -1600,14 +1618,16 @@ static void change_port_settings(struct tty_struct *tty,
/* Disable Interrupts */
- write_mos_reg(serial, port_number, IER, 0x00);
- write_mos_reg(serial, port_number, FCR, 0x00);
- write_mos_reg(serial, port_number, FCR, 0xcf);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_FCR, 0x00);
+ write_mos_reg(serial, port_number, MOS7720_FCR, 0xcf);
/* Send the updated LCR value to the mos7720 */
- write_mos_reg(serial, port_number, LCR, mos7720_port->shadowLCR);
+ write_mos_reg(serial, port_number, MOS7720_LCR,
+ mos7720_port->shadowLCR);
mos7720_port->shadowMCR = 0x0b;
- write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+ write_mos_reg(serial, port_number, MOS7720_MCR,
+ mos7720_port->shadowMCR);
/* set up the MCR register and send it to the mos7720 */
mos7720_port->shadowMCR = UART_MCR_OUT2;
@@ -1619,14 +1639,17 @@ static void change_port_settings(struct tty_struct *tty,
/* To set hardware flow control to the specified *
* serial port, in SP1/2_CONTROL_REG */
if (port_number)
- write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x01);
+ write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
+ 0x01);
else
- write_mos_reg(serial, dummy, SP_CONTROL_REG, 0x02);
+ write_mos_reg(serial, dummy, MOS7720_SP_CONTROL_REG,
+ 0x02);
} else
mos7720_port->shadowMCR &= ~(UART_MCR_XONANY);
- write_mos_reg(serial, port_number, MCR, mos7720_port->shadowMCR);
+ write_mos_reg(serial, port_number, MOS7720_MCR,
+ mos7720_port->shadowMCR);
/* Determine divisor based on baud rate */
baud = tty_get_baud_rate(tty);
@@ -1639,7 +1662,7 @@ static void change_port_settings(struct tty_struct *tty,
if (baud >= 230400) {
set_higher_rates(mos7720_port, baud);
/* Enable Interrupts */
- write_mos_reg(serial, port_number, IER, 0x0c);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
return;
}
@@ -1650,7 +1673,7 @@ static void change_port_settings(struct tty_struct *tty,
if (cflag & CBAUD)
tty_encode_baud_rate(tty, baud, baud);
/* Enable Interrupts */
- write_mos_reg(serial, port_number, IER, 0x0c);
+ write_mos_reg(serial, port_number, MOS7720_IER, 0x0c);
if (port->read_urb->status != -EINPROGRESS) {
status = usb_submit_urb(port->read_urb, GFP_KERNEL);
@@ -1725,7 +1748,7 @@ static int get_lsr_info(struct tty_struct *tty,
count = mos7720_chars_in_buffer(tty);
if (count == 0) {
- read_mos_reg(port->serial, port_number, LSR, &data);
+ read_mos_reg(port->serial, port_number, MOS7720_LSR, &data);
if ((data & (UART_LSR_TEMT | UART_LSR_THRE))
== (UART_LSR_TEMT | UART_LSR_THRE)) {
dev_dbg(&port->dev, "%s -- Empty\n", __func__);
@@ -1782,7 +1805,7 @@ static int mos7720_tiocmset(struct tty_struct *tty,
mcr &= ~UART_MCR_LOOP;
mos7720_port->shadowMCR = mcr;
- write_mos_reg(port->serial, port->port_number, MCR,
+ write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
return 0;
@@ -1827,7 +1850,7 @@ static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
}
mos7720_port->shadowMCR = mcr;
- write_mos_reg(port->serial, port->port_number, MCR,
+ write_mos_reg(port->serial, port->port_number, MOS7720_MCR,
mos7720_port->shadowMCR);
return 0;
@@ -1942,7 +1965,7 @@ static int mos7720_startup(struct usb_serial *serial)
}
#endif
/* LSR For Port 1 */
- read_mos_reg(serial, 0, LSR, &data);
+ read_mos_reg(serial, 0, MOS7720_LSR, &data);
dev_dbg(&dev->dev, "LSR:%x\n", data);
return 0;
--
1.8.1.2
next prev parent reply other threads:[~2015-06-23 13:29 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 12:17 [PATCH v2 0/7] fix build failure of mn10300 Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 12:17 ` [PATCH v2 1/7] mn10300: fix build failure Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-07-16 7:17 ` Sudip Mukherjee
2015-07-16 21:54 ` Andrew Morton
2015-07-17 5:06 ` Sudip Mukherjee
2015-06-18 12:17 ` [PATCH v2 2/7] mn10300: Provide dummy dma_alloc_attrs() and dma_free_attrs() Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 12:17 ` [PATCH v2 3/7] mmc: mediatek: build as module Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 13:10 ` Ulf Hansson
2015-06-18 13:10 ` Ulf Hansson
2015-06-18 13:10 ` Ulf Hansson
2015-06-18 12:17 ` [PATCH v2 4/7] USB: mos7720: rename DCR Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-23 10:09 ` Johan Hovold
2015-06-23 10:09 ` Johan Hovold
2015-06-23 13:29 ` Sudip Mukherjee [this message]
2015-06-26 7:46 ` [PATCH v3] USB: mos7720: rename registers Johan Hovold
2015-06-26 13:53 ` Sudip Mukherjee
2015-06-18 12:17 ` [PATCH v2 5/7] samples: kdbus: disable for mn10300 Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 14:39 ` Greg Kroah-Hartman
2015-06-18 14:39 ` Greg Kroah-Hartman
2015-06-18 16:19 ` Sudip Mukherjee
2015-06-18 16:19 ` Sudip Mukherjee
2015-06-18 16:19 ` Sudip Mukherjee
2015-06-18 16:25 ` Greg Kroah-Hartman
2015-06-18 16:25 ` Greg Kroah-Hartman
2015-06-18 12:17 ` [PATCH v2 6/7] mn10300: kgdb_arch_set_pc Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 12:17 ` [PATCH v2 7/7] mn10300: add early_init_dt_* Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 12:17 ` Sudip Mukherjee
2015-06-18 14:51 ` [PATCH v2 0/7] fix build failure of mn10300 Russell King - ARM Linux
2015-06-18 14:51 ` Russell King - ARM Linux
[not found] ` <CAA0PaPGMtePS+fmpi1QBZi8uHtuU3Z7_Y+9f0+O38o+8xfo+1Q@mail.gmail.com>
2015-06-18 15:44 ` [Linux-am33-list] " Russell King - ARM Linux
2015-06-18 15:44 ` Russell King - ARM Linux
2015-06-18 15:44 ` Russell King - ARM Linux
2015-06-18 16:13 ` Sudip Mukherjee
2015-06-18 16:13 ` Sudip Mukherjee
2015-06-18 16:13 ` Sudip Mukherjee
2015-07-10 11:20 ` Sudip Mukherjee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1435066180-4964-1-git-send-email-sudipm.mukherjee@gmail.com \
--to=sudipm.mukherjee@gmail.com \
--cc=dhowells@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=linux-am33-list@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.