From: Simon Glass <sjg@chromium.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi
Date: Tue, 7 Jul 2015 20:53:32 -0600 [thread overview]
Message-ID: <1436324032-17931-1-git-send-email-sjg@chromium.org> (raw)
Raspberry Pi uses a DWC2 USB controller and a SMSC USB Ethernet adaptor.
Neither of these currently support driver model.
This series does the following:
- Move Raspberry Pi to use device tree control (u-boot-dtb.bin instead of
u-boot.bin)
- Remove GPIO platform data (now uses device tree)
- Remove serial platform data (now uses device tree)
- Add 'ranges' support to simple-bus
- Convert the DWC2 USB driver to support driver model
- Convert the SMSC95XX USB Ethernet driver to support driver model
- Enable CONFIG_DM_ETH and CONFIG_DM_USB on Raspberry Pi
With Ethernet active the device list looks something like this:
U-Boot> dm tree
Class Probed Name
----------------------------------------
root [ + ] root_driver
simple_bus [ + ] |-- soc
gpio [ ] | |-- gpio at 7e200000
serial [ + ] | |-- uart at 7e201000
usb [ + ] | `-- usb at 7e980000
usb_hub [ + ] | `-- usb_hub
usb_hub [ + ] | `-- usb_hub
eth [ + ] | `-- smsc95xx_eth
simple_bus [ ] `-- clocks
Raspberry Pi 2 is not converted as I do not have one to test at present.
Simon Glass (20):
dm: net: Support usbethaddr environment variable
dm: usb: Allow USB Ethernet whenever CONFIG_DM_ETH is not defined
dm: usb: Add an errno.h header to usb_ether.c
dm: usb: Prepare dwc2 driver for driver-model conversion
dm: usb: Add driver-model support to dwc2
net: smsc95xx: Sort the include files
net: smsc95xx: Rename AX_RX_URB_SIZE to RX_URB_SIZE
net: smsc95xx: Correct the error numbers
net: smsc95xx: Prepare for conversion to driver model
net: smsc95xx: Add driver-model support
dm: serial: Update binding for PL01x serial UART
dm: Support address translation for simple-bus
arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info
arm: rpi: Bring in kernel device tree files
arm: rpi: Device tree modifications for U-Boot
arm: rpi: Enable device tree control for Rasberry Pi
arm: rpi: Drop the UART console platform data
arm: rpi: Drop the GPIO platform data
arm: rpi: Move to driver model for USB
arm: rpi: Use driver model for Ethernet
arch/arm/dts/Makefile | 2 +
arch/arm/dts/bcm2835-rpi-b.dts | 23 ++
arch/arm/dts/bcm2835-rpi.dtsi | 51 ++++
arch/arm/dts/bcm2835.dtsi | 194 ++++++++++++
arch/arm/dts/stv0991.dts | 2 +-
arch/arm/mach-bcm283x/include/mach/gpio.h | 2 -
board/raspberrypi/rpi/rpi.c | 24 --
common/cmd_usb.c | 7 +-
configs/rpi_defconfig | 5 +
doc/device-tree-bindings/serial/pl011.txt | 53 ++++
doc/device-tree-bindings/serial/pl01x.txt | 7 -
drivers/core/device.c | 17 +-
drivers/core/simple-bus.c | 30 ++
drivers/gpio/bcm2835_gpio.c | 20 ++
drivers/serial/serial_pl01x.c | 6 +-
drivers/usb/eth/smsc95xx.c | 469 ++++++++++++++++++++----------
drivers/usb/eth/usb_ether.c | 1 +
drivers/usb/host/dwc2.c | 247 ++++++++++++----
include/configs/rpi-common.h | 3 +-
include/dm/device-internal.h | 12 +
include/dt-bindings/pinctrl/bcm2835.h | 27 ++
net/eth.c | 7 +-
22 files changed, 966 insertions(+), 243 deletions(-)
create mode 100644 arch/arm/dts/bcm2835-rpi-b.dts
create mode 100644 arch/arm/dts/bcm2835-rpi.dtsi
create mode 100644 arch/arm/dts/bcm2835.dtsi
create mode 100644 doc/device-tree-bindings/serial/pl011.txt
delete mode 100644 doc/device-tree-bindings/serial/pl01x.txt
create mode 100644 include/dt-bindings/pinctrl/bcm2835.h
--
2.4.3.573.g4eafbef
next reply other threads:[~2015-07-08 2:53 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-08 2:53 Simon Glass [this message]
2015-07-08 2:53 ` [U-Boot] [PATCH 01/20] dm: net: Support usbethaddr environment variable Simon Glass
2015-07-08 4:04 ` Joe Hershberger
2015-07-08 20:31 ` Simon Glass
2015-07-08 20:43 ` Joe Hershberger
2015-07-08 21:07 ` Simon Glass
2015-07-20 13:56 ` Simon Glass
2015-07-20 18:10 ` Joe Hershberger
2015-07-21 21:25 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 02/20] dm: usb: Allow USB Ethernet whenever CONFIG_DM_ETH is not defined Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 03/20] dm: usb: Add an errno.h header to usb_ether.c Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 04/20] dm: usb: Prepare dwc2 driver for driver-model conversion Simon Glass
2015-07-27 23:31 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 05/20] dm: usb: Add driver-model support to dwc2 Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 06/20] net: smsc95xx: Sort the include files Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 07/20] net: smsc95xx: Rename AX_RX_URB_SIZE to RX_URB_SIZE Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 08/20] net: smsc95xx: Correct the error numbers Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 09/20] net: smsc95xx: Prepare for conversion to driver model Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 10/20] net: smsc95xx: Add driver-model support Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 11/20] dm: serial: Update binding for PL01x serial UART Simon Glass
2015-07-08 22:00 ` Vikas MANOCHA
[not found] ` <1436324032-17931-12-git-send-email-sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2015-07-15 9:00 ` Linus Walleij
2015-07-15 9:00 ` [U-Boot] " Linus Walleij
[not found] ` <CACRpkdb=t21=qpqar5VXd4mtqTWrq6MvoX1OsVgmWpkyFqhj3w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-15 9:38 ` Arnd Bergmann
2015-07-15 9:38 ` [U-Boot] " Arnd Bergmann
2015-07-15 10:08 ` Linus Walleij
2015-07-15 10:08 ` [U-Boot] " Linus Walleij
[not found] ` <CACRpkdakAVcBT8phhbFjE+mkfA0pTcHYiaL0dV4UNieH54fd+w-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2015-07-15 10:17 ` Arnd Bergmann
2015-07-15 10:17 ` [U-Boot] " Arnd Bergmann
2015-07-16 7:41 ` Geert Uytterhoeven
2015-07-16 7:41 ` [U-Boot] " Geert Uytterhoeven
2015-10-19 7:19 ` Linus Walleij
2015-10-19 7:19 ` [U-Boot] " Linus Walleij
2015-07-08 2:53 ` [U-Boot] [PATCH 12/20] dm: Support address translation for simple-bus Simon Glass
2015-07-27 23:32 ` Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 13/20] arm: rpi: Define CONFIG_TFTP_TSIZE to show tftp size info Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 14/20] arm: rpi: Bring in kernel device tree files Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 15/20] arm: rpi: Device tree modifications for U-Boot Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 16/20] arm: rpi: Enable device tree control for Rasberry Pi Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 17/20] arm: rpi: Drop the UART console platform data Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 18/20] arm: rpi: Drop the GPIO " Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 19/20] arm: rpi: Move to driver model for USB Simon Glass
2015-07-08 2:53 ` [U-Boot] [PATCH 20/20] arm: rpi: Use driver model for Ethernet Simon Glass
2015-07-11 5:34 ` [U-Boot] [PATCH 00/20] arm: rpi: Enable USB and Ethernet driver model Raspberry Pi Stephen Warren
2015-07-11 14:04 ` Simon Glass
2015-07-14 4:52 ` Stephen Warren
2015-07-14 15:44 ` Simon Glass
2015-07-24 4:17 ` Stephen Warren
2015-07-24 13:44 ` Tom Rini
2015-07-28 3:10 ` Stephen Warren
2015-07-28 13:55 ` Tom Rini
2015-07-28 15:44 ` Simon Glass
2015-08-01 3:10 ` Stephen Warren
2015-08-01 3:01 ` Stephen Warren
2015-07-16 14:10 ` Pavel Machek
2015-07-20 14:25 ` Simon Glass
2015-07-24 4:20 ` Stephen Warren
2015-08-03 23:45 ` Marek Vasut
2015-08-04 0:07 ` Simon Glass
2015-08-04 0:37 ` Marek Vasut
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436324032-17931-1-git-send-email-sjg@chromium.org \
--to=sjg@chromium.org \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.