* [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x)
@ 2015-07-14 13:00 Roger Shimizu
2015-07-14 13:00 ` [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl Roger Shimizu
` (2 more replies)
0 siblings, 3 replies; 8+ messages in thread
From: Roger Shimizu @ 2015-07-14 13:00 UTC (permalink / raw)
To: linux-arm-kernel
Dear Orion5x Maintainer,
I'd like to add DTS support for a bit older linkstation orion5x device, LS-WTGL.
I have tested againt latest kernel next/dt branch on my box and it works fine.
Please consider to merge. Thank you!
Cheers,
Roger
Roger Shimizu (2):
ARM: dts: add buffalo linkstation ls-wtgl
ARM: defconfig: add DT support for orion5x_defconfig
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 242 +++++++++++++++++++++++
arch/arm/configs/orion5x_defconfig | 4 +
3 files changed, 247 insertions(+)
create mode 100644 arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
--
1.9.1
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl
2015-07-14 13:00 [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
@ 2015-07-14 13:00 ` Roger Shimizu
2015-07-20 20:42 ` Andrew Lunn
2015-07-14 13:00 ` [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig Roger Shimizu
2015-07-20 13:50 ` [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
2 siblings, 1 reply; 8+ messages in thread
From: Roger Shimizu @ 2015-07-14 13:00 UTC (permalink / raw)
To: linux-arm-kernel
Add dts file to support Buffalo Linkstation LS-WTGL,
which is marvell orion5x based 2-bay 3.5" HDD NAS.
Product info:
- (JPN) http://buffalo.jp/products/catalog/storage/ls-wtgl_r1/
- (ENG) http://www.buffalotech.com/support-and-downloads/download/LinkStation_Pro_Duo_Manual_web.pdf
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 242 +++++++++++++++++++++++
2 files changed, 243 insertions(+)
create mode 100644 arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index a8bf702..f3ddfa0 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -464,6 +464,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-linkstation-lswtgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += \
diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
new file mode 100644
index 0000000..6d021bd
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
@@ -0,0 +1,242 @@
+/*
+ * Device Tree file for Buffalo Linkstation LS-WTGL
+ *
+ * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Buffalo Linkstation LS-WTGL";
+ compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory { /* 64 MB */
+ device_type = "memory";
+ reg = <0x00000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
+
+ internal-regs {
+ pinctrl: pinctrl at 10000 {
+ pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
+ &pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ pmx_led_power: pmx-leds {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_alarm: pmx-leds {
+ marvell,pins = "mpp2";
+ marvell,function = "gpio";
+ };
+
+ pmx_led_info: pmx-leds {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_hdd: pmx-power-hdd {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_usb_power: pmx-usb-power {
+ marvell,pins = "mpp9";
+ marvell,function = "gpio";
+ };
+
+ pmx_sata0: pmx-sata0 {
+ marvell,pins = "mpp12";
+ //marvell,function = "gpio";
+ marvell,function = "sata0";
+ };
+
+ pmx_sata1: pmx-sata1 {
+ marvell,pins = "mpp13";
+ //marvell,function = "gpio";
+ marvell,function = "sata1";
+ };
+
+ pmx_fan_high: pmx-fan-high {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_low: pmx-fan-low {
+ marvell,pins = "mpp17";
+ marvell,function = "gpio";
+ };
+
+ pmx_fan_lock: pmx-fan-lock {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ pmx_power_switch: pmx-power-switch {
+ marvell,pins = "mpp8", "mpp10";
+ marvell,function = "gpio";
+ };
+ };
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_switch>;
+ pinctrl-names = "default";
+
+ button at 1 {
+ label = "Power-on Switch";
+ linux,code = <KEY_RESERVED>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ button at 2 {
+ label = "Power-auto Switch";
+ linux,code = <KEY_ESC>;
+ linux,input-type = <5>;
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_led_power &pmx_led_alarm
+ &pmx_led_info>;
+ pinctrl-names = "default";
+
+ led at 1 {
+ label = "lswtgl:blue:power";
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+
+ led at 2 {
+ label = "lswtgl:red:alarm";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ };
+
+ led at 3 {
+ label = "lswtgl:amber:info";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio_fan {
+ compatible = "gpio-fan";
+ pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
+ pinctrl-names = "default";
+
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW
+ &gpio0 17 GPIO_ACTIVE_LOW>;
+
+ gpio-fan,speed-map = <0 3
+ 1500 2
+ 3250 1
+ 5000 0>;
+
+ alarm-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+ };
+
+ restart_poweroff {
+ compatible = "restart-poweroff";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&pmx_power_hdd &pmx_usb_power>;
+ pinctrl-names = "default";
+
+ usb_power: regulator at 1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "USB Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
+ };
+
+ hdd_power: regulator at 2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "HDD Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port at 0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&i2c {
+ status = "okay";
+
+ rtc {
+ compatible = "ricoh,rs5c372a";
+ reg = <0x32>;
+ };
+};
+
+&wdt {
+ status = "disabled";
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig
2015-07-14 13:00 [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
2015-07-14 13:00 ` [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl Roger Shimizu
@ 2015-07-14 13:00 ` Roger Shimizu
2015-07-20 20:47 ` Andrew Lunn
2015-07-20 13:50 ` [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
2 siblings, 1 reply; 8+ messages in thread
From: Roger Shimizu @ 2015-07-14 13:00 UTC (permalink / raw)
To: linux-arm-kernel
- add two DT-device entries into orion5x_defconfig
- enable EARLY_PRINTK because it's set in most "bootargs" setting for
orion5x dts files. e.g.: 'bootargs = "console=ttyS0,115200n8
earlyprintk";'
- enable NETCONSOLE as module because it's helpful to check boot log
when there's no serial connection
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
---
arch/arm/configs/orion5x_defconfig | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 855143f..d1f533e 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -14,8 +14,10 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_ARCH_ORION5X=y
+CONFIG_ARCH_ORION5X_DT=y
CONFIG_MACH_DB88F5281=y
CONFIG_MACH_RD88F5182=y
+CONFIG_MACH_RD88F5182_DT=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
@@ -81,6 +83,7 @@ CONFIG_NETDEVICES=y
CONFIG_MII=y
CONFIG_NET_DSA_MV88E6131=y
CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NETCONSOLE=m
CONFIG_MV643XX_ETH=y
CONFIG_MARVELL_PHY=y
# CONFIG_INPUT_MOUSEDEV is not set
@@ -157,6 +160,7 @@ CONFIG_LATENCYTOP=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_UART_8250=y
+CONFIG_EARLY_PRINTK=y
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_PCBC=m
--
1.9.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x)
2015-07-14 13:00 [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
2015-07-14 13:00 ` [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl Roger Shimizu
2015-07-14 13:00 ` [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig Roger Shimizu
@ 2015-07-20 13:50 ` Roger Shimizu
2 siblings, 0 replies; 8+ messages in thread
From: Roger Shimizu @ 2015-07-20 13:50 UTC (permalink / raw)
To: linux-arm-kernel
Dear Andrew, Jason,
Could you help to review my patchset on Linkstation LS-WTGL (orion5x), please?
Thank you and look forward to your feedback!
Cheers,
Roger
On Tue, Jul 14, 2015 at 10:00 PM, Roger Shimizu <rogershimizu@gmail.com> wrote:
> Dear Orion5x Maintainer,
>
> I'd like to add DTS support for a bit older linkstation orion5x device, LS-WTGL.
> I have tested againt latest kernel next/dt branch on my box and it works fine.
> Please consider to merge. Thank you!
>
> Cheers,
> Roger
>
> Roger Shimizu (2):
> ARM: dts: add buffalo linkstation ls-wtgl
> ARM: defconfig: add DT support for orion5x_defconfig
>
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 242 +++++++++++++++++++++++
> arch/arm/configs/orion5x_defconfig | 4 +
> 3 files changed, 247 insertions(+)
> create mode 100644 arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
>
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl
2015-07-14 13:00 ` [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl Roger Shimizu
@ 2015-07-20 20:42 ` Andrew Lunn
0 siblings, 0 replies; 8+ messages in thread
From: Andrew Lunn @ 2015-07-20 20:42 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 14, 2015 at 10:00:01PM +0900, Roger Shimizu wrote:
> Add dts file to support Buffalo Linkstation LS-WTGL,
> which is marvell orion5x based 2-bay 3.5" HDD NAS.
> Product info:
> - (JPN) http://buffalo.jp/products/catalog/storage/ls-wtgl_r1/
> - (ENG) http://www.buffalotech.com/support-and-downloads/download/LinkStation_Pro_Duo_Manual_web.pdf
>
> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts | 242 +++++++++++++++++++++++
> 2 files changed, 243 insertions(+)
> create mode 100644 arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index a8bf702..f3ddfa0 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -464,6 +464,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
> dtb-$(CONFIG_ARCH_ORION5X) += \
> orion5x-lacie-d2-network.dtb \
> orion5x-lacie-ethernet-disk-mini-v2.dtb \
> + orion5x-linkstation-lswtgl.dtb \
> orion5x-maxtor-shared-storage-2.dtb \
> orion5x-rd88f5182-nas.dtb
> dtb-$(CONFIG_ARCH_PRIMA2) += \
> diff --git a/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
> new file mode 100644
> index 0000000..6d021bd
> --- /dev/null
> +++ b/arch/arm/boot/dts/orion5x-linkstation-lswtgl.dts
> @@ -0,0 +1,242 @@
> +/*
> + * Device Tree file for Buffalo Linkstation LS-WTGL
> + *
> + * Copyright (C) 2015, Roger Shimizu <rogershimizu@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
Hi Roger
Could you licence this under both GPL and X11? See the recent posting
by Benjamin Cama for the WSGL.
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "orion5x-mv88f5182.dtsi"
> +
> +/ {
> + model = "Buffalo Linkstation LS-WTGL";
> + compatible = "buffalo,lswtgl", "marvell,orion5x-88f5182", "marvell,orion5x";
> +
> + memory { /* 64 MB */
> + device_type = "memory";
> + reg = <0x00000000 0x4000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200n8 earlyprintk";
> + linux,stdout-path = &uart0;
> + };
> +
> + soc {
> + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
> + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
> + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x40000>;
> +
> + internal-regs {
> + pinctrl: pinctrl at 10000 {
> + pinctrl-0 = <&pmx_usb_power &pmx_power_hdd
> + &pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
> + pinctrl-names = "default";
> +
> + pmx_led_power: pmx-leds {
> + marvell,pins = "mpp0";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_alarm: pmx-leds {
> + marvell,pins = "mpp2";
> + marvell,function = "gpio";
> + };
> +
> + pmx_led_info: pmx-leds {
> + marvell,pins = "mpp3";
> + marvell,function = "gpio";
> + };
> +
> + pmx_power_hdd: pmx-power-hdd {
> + marvell,pins = "mpp1";
> + marvell,function = "gpio";
> + };
> +
> + pmx_usb_power: pmx-usb-power {
> + marvell,pins = "mpp9";
> + marvell,function = "gpio";
> + };
> +
> + pmx_sata0: pmx-sata0 {
> + marvell,pins = "mpp12";
> + //marvell,function = "gpio";
Please remove commented out lines.
> + marvell,function = "sata0";
> + };
> +
> + pmx_sata1: pmx-sata1 {
> + marvell,pins = "mpp13";
> + //marvell,function = "gpio";
Same here.
> + marvell,function = "sata1";
> + };
Otherwise this looks good.
Andrew
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig
2015-07-14 13:00 ` [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig Roger Shimizu
@ 2015-07-20 20:47 ` Andrew Lunn
2015-07-21 10:02 ` Roger Shimizu
0 siblings, 1 reply; 8+ messages in thread
From: Andrew Lunn @ 2015-07-20 20:47 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 14, 2015 at 10:00:02PM +0900, Roger Shimizu wrote:
> - add two DT-device entries into orion5x_defconfig
This i agree with.
> - enable EARLY_PRINTK because it's set in most "bootargs" setting for
> orion5x dts files. e.g.: 'bootargs = "console=ttyS0,115200n8
> earlyprintk";'
This i'm somewhat against. Of the 113 defconfigs, only 10 enable it.
There has also been a push to remove bootargs completely, since it is
not needed if you set stdout-path.
> - enable NETCONSOLE as module because it's helpful to check boot log
> when there's no serial connection
And only three enable this.
Andrew
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig
2015-07-20 20:47 ` Andrew Lunn
@ 2015-07-21 10:02 ` Roger Shimizu
2015-07-21 13:07 ` Andrew Lunn
0 siblings, 1 reply; 8+ messages in thread
From: Roger Shimizu @ 2015-07-21 10:02 UTC (permalink / raw)
To: linux-arm-kernel
Dear Andrew,
Thanks for your feedback!
For config of "EARLY_PRINTK" and "NETCONSOLE", I understand your
concern and I'll remove them.
However, I want to add another one, which I find it necessary to boot
on my orion5x hardware:
CONFIG_ARM_ATAG_DTB_COMPAT=y
I need this because the uboot is quite old on that orion5x board and
the only way to add DT support is to append the DTB at the end of
zImage.
I guess other orion5x boards might be the same situation, so this
config had better go into "orion5x_defconfig".
Let me know your opinion. Thank you!
Cheers,
Roger
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig
2015-07-21 10:02 ` Roger Shimizu
@ 2015-07-21 13:07 ` Andrew Lunn
0 siblings, 0 replies; 8+ messages in thread
From: Andrew Lunn @ 2015-07-21 13:07 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jul 21, 2015 at 07:02:31PM +0900, Roger Shimizu wrote:
> Dear Andrew,
>
> Thanks for your feedback!
>
> For config of "EARLY_PRINTK" and "NETCONSOLE", I understand your
> concern and I'll remove them.
> However, I want to add another one, which I find it necessary to boot
> on my orion5x hardware:
>
> CONFIG_ARM_ATAG_DTB_COMPAT=y
Hi Roger
This one is .O.K.
Andrew
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2015-07-21 13:07 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-07-14 13:00 [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
2015-07-14 13:00 ` [PATCH 1/2] ARM: dts: add buffalo linkstation ls-wtgl Roger Shimizu
2015-07-20 20:42 ` Andrew Lunn
2015-07-14 13:00 ` [PATCH 2/2] ARM: defconfig: add DT support for orion5x_defconfig Roger Shimizu
2015-07-20 20:47 ` Andrew Lunn
2015-07-21 10:02 ` Roger Shimizu
2015-07-21 13:07 ` Andrew Lunn
2015-07-20 13:50 ` [PATCH 0/2] ARM: DTS support for Linkstation LS-WTGL (orion5x) Roger Shimizu
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.