From: Fabien DESSENNE <fabien.dessenne@st.com>
To: Maxime COQUELIN <maxime.coquelin@st.com>,
Srinivas Kandagatla <srinivas.kandagatla@gmail.com>,
Patrice CHOTARD <patrice.chotard@st.com>,
Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"kernel@stlinux.com" <kernel@stlinux.com>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Subject: RE: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
Date: Wed, 17 Jun 2015 15:52:47 +0200 [thread overview]
Message-ID: <15ED7CB7B68B4D4C96C7D27A1A23941201BA003733@SAFEX1MAIL2.st.com> (raw)
In-Reply-To: <55816455.1030503@st.com>
Hi Maxime,
> -----Original Message-----
> From: Maxime COQUELIN
> Sent: mercredi 17 juin 2015 14:13
> To: Fabien DESSENNE; Srinivas Kandagatla; Patrice CHOTARD; Rob Herring;
> Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Russell King; linux-arm-
> kernel@lists.infradead.org; kernel@stlinux.com;
> devicetree@vger.kernel.org; linux-kernel@vger.kernel.org
> Cc: Benjamin Gaignard
> Subject: Re: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
>
> Hi Fabien,
>
> On 06/16/2015 03:30 PM, Fabien Dessenne wrote:
> > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
> > first of the two bdisp devices, defining register address, interrupt
> > and clock.
> >
> > Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> > ---
> > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stih410.dtsi
> > b/arch/arm/boot/dts/stih410.dtsi index 208b5e8..6f40bc9 100644
> > --- a/arch/arm/boot/dts/stih410.dtsi
> > +++ b/arch/arm/boot/dts/stih410.dtsi
> > @@ -10,6 +10,10 @@
> > #include "stih407-family.dtsi"
> > #include "stih410-pinctrl.dtsi"
> > / {
> > + aliases {
> > + bdisp0 = &bdisp0;
> > + };
> > +
> > soc {
> > usb2_picophy1: phy2 {
> > compatible = "st,stih407-usb2-phy"; @@ -218,5
> +222,13 @@
> > };
> > };
> > };
> > +
> > + bdisp0:bdisp@9f10000 {
> > + compatible = "st,stih407-bdisp";
> > + reg = <0x9f10000 0x1000>;
> > + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
> > + clock-names = "bdisp";
> > + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
> > + };
>
> Isn't the bdisp also present on STiH407 SoC?
> If so, could you please move this node to stih407-family file?
>
> Thanks,
> Maxime
For the time being, it is not planned to be supported on STiH407. Maybe one day...
Fabien
WARNING: multiple messages have this Message-ID (diff)
From: Fabien DESSENNE <fabien.dessenne-qxv4g6HH51o@public.gmane.org>
To: Maxime COQUELIN <maxime.coquelin-qxv4g6HH51o@public.gmane.org>,
Srinivas Kandagatla
<srinivas.kandagatla-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Patrice CHOTARD <patrice.chotard-qxv4g6HH51o@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
"kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org"
<kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org>,
"devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
"linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org"
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>
Cc: Benjamin Gaignard
<benjamin.gaignard-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: RE: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
Date: Wed, 17 Jun 2015 15:52:47 +0200 [thread overview]
Message-ID: <15ED7CB7B68B4D4C96C7D27A1A23941201BA003733@SAFEX1MAIL2.st.com> (raw)
In-Reply-To: <55816455.1030503-qxv4g6HH51o@public.gmane.org>
Hi Maxime,
> -----Original Message-----
> From: Maxime COQUELIN
> Sent: mercredi 17 juin 2015 14:13
> To: Fabien DESSENNE; Srinivas Kandagatla; Patrice CHOTARD; Rob Herring;
> Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Russell King; linux-arm-
> kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org; kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org;
> devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Cc: Benjamin Gaignard
> Subject: Re: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
>
> Hi Fabien,
>
> On 06/16/2015 03:30 PM, Fabien Dessenne wrote:
> > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
> > first of the two bdisp devices, defining register address, interrupt
> > and clock.
> >
> > Signed-off-by: Fabien Dessenne <fabien.dessenne-qxv4g6HH51o@public.gmane.org>
> > ---
> > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stih410.dtsi
> > b/arch/arm/boot/dts/stih410.dtsi index 208b5e8..6f40bc9 100644
> > --- a/arch/arm/boot/dts/stih410.dtsi
> > +++ b/arch/arm/boot/dts/stih410.dtsi
> > @@ -10,6 +10,10 @@
> > #include "stih407-family.dtsi"
> > #include "stih410-pinctrl.dtsi"
> > / {
> > + aliases {
> > + bdisp0 = &bdisp0;
> > + };
> > +
> > soc {
> > usb2_picophy1: phy2 {
> > compatible = "st,stih407-usb2-phy"; @@ -218,5
> +222,13 @@
> > };
> > };
> > };
> > +
> > + bdisp0:bdisp@9f10000 {
> > + compatible = "st,stih407-bdisp";
> > + reg = <0x9f10000 0x1000>;
> > + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
> > + clock-names = "bdisp";
> > + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
> > + };
>
> Isn't the bdisp also present on STiH407 SoC?
> If so, could you please move this node to stih407-family file?
>
> Thanks,
> Maxime
For the time being, it is not planned to be supported on STiH407. Maybe one day...
Fabien
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: fabien.dessenne@st.com (Fabien DESSENNE)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
Date: Wed, 17 Jun 2015 15:52:47 +0200 [thread overview]
Message-ID: <15ED7CB7B68B4D4C96C7D27A1A23941201BA003733@SAFEX1MAIL2.st.com> (raw)
In-Reply-To: <55816455.1030503@st.com>
Hi Maxime,
> -----Original Message-----
> From: Maxime COQUELIN
> Sent: mercredi 17 juin 2015 14:13
> To: Fabien DESSENNE; Srinivas Kandagatla; Patrice CHOTARD; Rob Herring;
> Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Russell King; linux-arm-
> kernel at lists.infradead.org; kernel at stlinux.com;
> devicetree at vger.kernel.org; linux-kernel at vger.kernel.org
> Cc: Benjamin Gaignard
> Subject: Re: [PATCH] ARM: DT: STiH410: Add bdisp dt nodes
>
> Hi Fabien,
>
> On 06/16/2015 03:30 PM, Fabien Dessenne wrote:
> > Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the
> > first of the two bdisp devices, defining register address, interrupt
> > and clock.
> >
> > Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
> > ---
> > arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++
> > 1 file changed, 12 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/stih410.dtsi
> > b/arch/arm/boot/dts/stih410.dtsi index 208b5e8..6f40bc9 100644
> > --- a/arch/arm/boot/dts/stih410.dtsi
> > +++ b/arch/arm/boot/dts/stih410.dtsi
> > @@ -10,6 +10,10 @@
> > #include "stih407-family.dtsi"
> > #include "stih410-pinctrl.dtsi"
> > / {
> > + aliases {
> > + bdisp0 = &bdisp0;
> > + };
> > +
> > soc {
> > usb2_picophy1: phy2 {
> > compatible = "st,stih407-usb2-phy"; @@ -218,5
> +222,13 @@
> > };
> > };
> > };
> > +
> > + bdisp0:bdisp at 9f10000 {
> > + compatible = "st,stih407-bdisp";
> > + reg = <0x9f10000 0x1000>;
> > + interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
> > + clock-names = "bdisp";
> > + clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
> > + };
>
> Isn't the bdisp also present on STiH407 SoC?
> If so, could you please move this node to stih407-family file?
>
> Thanks,
> Maxime
For the time being, it is not planned to be supported on STiH407. Maybe one day...
Fabien
next prev parent reply other threads:[~2015-06-17 13:55 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 13:30 [PATCH] ARM: DT: STiH410: Add bdisp dt nodes Fabien Dessenne
2015-06-16 13:30 ` Fabien Dessenne
2015-06-16 13:30 ` Fabien Dessenne
2015-06-17 12:13 ` Maxime Coquelin
2015-06-17 12:13 ` Maxime Coquelin
2015-06-17 12:13 ` Maxime Coquelin
2015-06-17 13:52 ` Fabien DESSENNE [this message]
2015-06-17 13:52 ` Fabien DESSENNE
2015-06-17 13:52 ` Fabien DESSENNE
2015-07-22 13:08 ` Maxime Coquelin
2015-07-22 13:08 ` Maxime Coquelin
2015-07-22 13:08 ` Maxime Coquelin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15ED7CB7B68B4D4C96C7D27A1A23941201BA003733@SAFEX1MAIL2.st.com \
--to=fabien.dessenne@st.com \
--cc=benjamin.gaignard@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@stlinux.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=maxime.coquelin@st.com \
--cc=patrice.chotard@st.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=srinivas.kandagatla@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.