From: Sibi Sankar <sibis@codeaurora.org>
To: bjorn.andersson@linaro.org, robh+dt@kernel.org, will@kernel.org,
saiprakash.ranjan@codeaurora.org
Cc: ohad@wizery.com, agross@kernel.org, mathieu.poirier@linaro.org,
robin.murphy@arm.com, joro@8bytes.org, p.zabel@pengutronix.de,
linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, evgreen@chromium.org,
dianders@chromium.org, swboyd@chromium.org,
Sibi Sankar <sibis@codeaurora.org>
Subject: [PATCH 3/9] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding
Date: Fri, 25 Jun 2021 01:17:32 +0530 [thread overview]
Message-ID: <1624564058-24095-4-git-send-email-sibis@codeaurora.org> (raw)
In-Reply-To: <1624564058-24095-1-git-send-email-sibis@codeaurora.org>
Add a new modem compatible string for QTI SC7280 SoCs and introduce the
"qcom,ext-regs" and "qcom,qaccept-regs" bindings needed by the modem
sub-system running on SC7280 SoCs.
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
---
.../devicetree/bindings/remoteproc/qcom,q6v5.txt | 32 ++++++++++++++++++++--
1 file changed, 30 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 494257010629..d802e57701b8 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -15,6 +15,7 @@ on the Qualcomm Hexagon core.
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
"qcom,sc7180-mss-pil"
+ "qcom,sc7280-mss-pil"
"qcom,sdm845-mss-pil"
- reg:
@@ -47,6 +48,7 @@ on the Qualcomm Hexagon core.
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
qcom,sc7180-mss-pil:
+ qcom,sc7280-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
@@ -87,6 +89,8 @@ on the Qualcomm Hexagon core.
qcom,sc7180-mss-pil:
must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
"nav"
+ qcom,sc7280-mss-pil:
+ must be "iface", "xo", "snoc_axi", "offline"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
@@ -98,7 +102,7 @@ on the Qualcomm Hexagon core.
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
- sub-system on SC7180, SDM845 SoCs
+ sub-system on SC7180, SC7280, SDM845 SoCs
- reset-names:
Usage: required
@@ -107,7 +111,7 @@ on the Qualcomm Hexagon core.
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
- sub-system on SC7180, SDM845 SoCs
+ sub-system on SC7180, SC7280, SDM845 SoCs
For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
should be referenced as follows:
@@ -173,6 +177,9 @@ For the compatible string below the following supplies are required:
qcom,msm8998-mss-pil:
must be "cx", "mx"
qcom,sc7180-mss-pil:
+ must be "cx", "mx", "mss"
+ qcom,sc7280-mss-pil:
+ must be "cx", "mss"
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss"
@@ -198,6 +205,9 @@ For the compatible string below the following supplies are required:
Definition: a phandle reference to a syscon representing TCSR followed
by the three offsets within syscon for q6, modem and nc
halt registers.
+ a phandle reference to a syscon representing TCSR followed
+ by the four offsets within syscon for q6, modem, nc and vq6
+ halt registers on SC7280 SoCs.
For the compatible strings below the following phandle references are required:
"qcom,sc7180-mss-pil"
@@ -208,6 +218,24 @@ For the compatible strings below the following phandle references are required:
by the offset within syscon for conn_box_spare0 register
used by the modem sub-system running on SC7180 SoC.
+For the compatible strings below the following phandle references are required:
+ "qcom,sc7280-mss-pil"
+- qcom,ext-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: two phandles reference to syscons representing TCSR_REG and
+ TCSR register space followed by the two offset within the syscon
+ to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
+ registers respectively.
+
+- qcom,qaccept-regs:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: a phandle reference to a syscon representing TCSR followed
+ by the three offsets within syscon for mdm, cx and axi
+ qaccept registers used by the modem sub-system running on
+ SC7280 SoC.
+
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
on platforms which do not have TrustZone.
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2021-06-24 19:48 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-24 19:47 [PATCH 0/9] Add Modem support on SC7280 SoCs Sibi Sankar
2021-06-24 19:47 ` [PATCH 1/9] dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support Sibi Sankar
2021-06-25 17:12 ` Matthias Kaehlcke
2021-06-25 17:12 ` Matthias Kaehlcke
2021-06-25 17:28 ` Sibi Sankar
2021-06-25 23:20 ` Matthias Kaehlcke
2021-06-25 23:20 ` Matthias Kaehlcke
2021-07-14 19:36 ` Rob Herring
2021-07-14 19:36 ` Rob Herring
2021-06-24 19:47 ` [PATCH 2/9] remoteproc: qcom: pas: Add SC7280 Modem support Sibi Sankar
2021-06-25 23:23 ` Matthias Kaehlcke
2021-06-25 23:23 ` Matthias Kaehlcke
2021-06-24 19:47 ` Sibi Sankar [this message]
2021-06-25 23:43 ` [PATCH 3/9] dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding Matthias Kaehlcke
2021-06-25 23:43 ` Matthias Kaehlcke
2021-06-30 19:57 ` Sibi Sankar
2021-07-14 19:37 ` Rob Herring
2021-07-14 19:37 ` Rob Herring
2021-06-24 19:47 ` [PATCH 4/9] iommu/arm-smmu-qcom: Request direct mapping for modem device Sibi Sankar
2021-06-25 4:27 ` Sai Prakash Ranjan
2021-06-24 19:47 ` [PATCH 5/9] remoteproc: mss: q6v5-mss: Add modem support on SC7280 Sibi Sankar
2021-06-25 0:35 ` Matthias Kaehlcke
2021-06-25 0:35 ` Matthias Kaehlcke
2021-06-25 14:21 ` Sibi Sankar
2021-06-25 16:39 ` Matthias Kaehlcke
2021-06-25 16:39 ` Matthias Kaehlcke
2021-06-24 19:47 ` [PATCH 6/9] arm64: dts: qcom: sc7280: Update reserved memory map Sibi Sankar
2021-06-28 18:11 ` Matthias Kaehlcke
2021-06-28 18:11 ` Matthias Kaehlcke
2021-06-30 20:02 ` Sibi Sankar
2021-07-30 18:24 ` Bjorn Andersson
2021-07-30 18:24 ` Bjorn Andersson
2021-06-24 19:47 ` [PATCH 7/9] arm64: dts: qcom: sc7280: Add nodes to boot modem Sibi Sankar
2021-07-30 18:00 ` Bjorn Andersson
2021-07-30 18:00 ` Bjorn Andersson
2021-06-24 19:47 ` [PATCH 8/9] arm64: dts: qcom: sc7280: Add Q6V5 MSS node Sibi Sankar
2021-06-28 18:39 ` Matthias Kaehlcke
2021-06-28 18:39 ` Matthias Kaehlcke
2021-06-30 20:03 ` Sibi Sankar
2021-07-30 18:01 ` Bjorn Andersson
2021-07-30 18:01 ` Bjorn Andersson
2021-06-24 19:47 ` [PATCH 9/9] arm64: dts: qcom: sc7280: Update " Sibi Sankar
2021-06-28 19:05 ` Matthias Kaehlcke
2021-06-28 19:05 ` Matthias Kaehlcke
2021-06-30 20:08 ` Sibi Sankar
2021-07-30 18:14 ` Bjorn Andersson
2021-07-30 18:14 ` Bjorn Andersson
2021-07-01 20:02 ` [PATCH 0/9] Add Modem support on SC7280 SoCs Pavel Machek
2021-07-01 20:02 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1624564058-24095-4-git-send-email-sibis@codeaurora.org \
--to=sibis@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=evgreen@chromium.org \
--cc=joro@8bytes.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=mathieu.poirier@linaro.org \
--cc=ohad@wizery.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=robin.murphy@arm.com \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=swboyd@chromium.org \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.