From: Daniel Vetter <daniel@ffwll.ch>
To: Jani Nikula <jani.nikula@intel.com>
Cc: m.deepak@intel.com, yetundex.adebisi@intel.com,
intel-gfx@lists.freedesktop.org
Subject: Re: [PATCH 1/1] drm/i915: make backlight hooks connector specific
Date: Mon, 14 Sep 2015 16:17:43 +0200 [thread overview]
Message-ID: <20150914141743.GK3383@phenom.ffwll.local> (raw)
In-Reply-To: <c4b3c0fbe362dc5a2ff1ccc93d01c52662a42c87.1442227790.git.jani.nikula@intel.com>
On Mon, Sep 14, 2015 at 02:03:48PM +0300, Jani Nikula wrote:
> Previously we've relied on having basically one backlight and one
> backlight type per platform. This is already a bit quirky with PMIC PWM
> support on VLV/CHV platforms with MIPI DSI. In the foreseeable future
> we'll have at least DPCD based backlight control on eDP and DCS command
> based backlight control on MIPI DSI. Backlight is becoming more and more
> connector specific, so reflect this fact by making the backlight control
> hooks connector specific.
>
> This enables further work to reuse generic backlight code in
> intel_panel.c while adding more specific backlight code accessed via the
> hooks.
>
> Cc: Deepak M <m.deepak@intel.com>
> Cc: Yetunde Adebisi <yetundex.adebisi@intel.com>
> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
> ---
> drivers/gpu/drm/i915/i915_drv.h | 9 ---
> drivers/gpu/drm/i915/intel_display.c | 2 -
> drivers/gpu/drm/i915/intel_dp.c | 2 +-
> drivers/gpu/drm/i915/intel_drv.h | 13 +++-
> drivers/gpu/drm/i915/intel_panel.c | 116 +++++++++++++++++++----------------
> 5 files changed, 74 insertions(+), 68 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
> index 174f39d0bf46..813023b438b2 100644
> --- a/drivers/gpu/drm/i915/i915_drv.h
> +++ b/drivers/gpu/drm/i915/i915_drv.h
> @@ -664,15 +664,6 @@ struct drm_i915_display_funcs {
> /* render clock increase/decrease */
> /* display clock increase/decrease */
> /* pll clock increase/decrease */
> -
> - int (*setup_backlight)(struct intel_connector *connector, enum pipe pipe);
> - uint32_t (*get_backlight)(struct intel_connector *connector);
> - void (*set_backlight)(struct intel_connector *connector,
> - uint32_t level);
> - void (*disable_backlight)(struct intel_connector *connector);
> - void (*enable_backlight)(struct intel_connector *connector);
> - uint32_t (*backlight_hz_to_pwm)(struct intel_connector *connector,
> - uint32_t hz);
> };
>
> enum forcewake_domain_id {
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index fc0086748b71..15de4ccc3903 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -14520,8 +14520,6 @@ static void intel_init_display(struct drm_device *dev)
> dev_priv->display.queue_flip = intel_default_queue_flip;
> }
>
> - intel_panel_init_backlight_funcs(dev);
> -
> mutex_init(&dev_priv->pps_mutex);
> }
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index a6872508adec..fa1a524844d5 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -5990,7 +5990,7 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
> }
>
> intel_panel_init(&intel_connector->panel, fixed_mode, downclock_mode);
> - intel_connector->panel.backlight_power = intel_edp_backlight_power;
> + intel_connector->panel.backlight.power = intel_edp_backlight_power;
> intel_panel_setup_backlight(connector, pipe);
>
> return true;
> diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
> index 02a755a50a96..35a65ca105b3 100644
> --- a/drivers/gpu/drm/i915/intel_drv.h
> +++ b/drivers/gpu/drm/i915/intel_drv.h
> @@ -182,9 +182,17 @@ struct intel_panel {
> struct pwm_device *pwm;
>
> struct backlight_device *device;
> - } backlight;
>
> - void (*backlight_power)(struct intel_connector *, bool enable);
> + /* Connector and platform specific backlight functions */
> + int (*setup)(struct intel_connector *connector, enum pipe pipe);
> + uint32_t (*get)(struct intel_connector *connector);
> + void (*set)(struct intel_connector *connector, uint32_t level);
> + void (*disable)(struct intel_connector *connector);
> + void (*enable)(struct intel_connector *connector);
> + uint32_t (*hz_to_pwm)(struct intel_connector *connector,
> + uint32_t hz);
> + void (*power)(struct intel_connector *, bool enable);
> + } backlight;
For the interface, could we just add a struct backlight_device instead?
Yes there's no useful kernel-internal interface for that, but we probably
need to fix this sooner or later anyway. And it would future-proof things
considerable I think.
-Daniel
> };
>
> struct intel_connector {
> @@ -1322,7 +1330,6 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe)
> void intel_panel_enable_backlight(struct intel_connector *connector);
> void intel_panel_disable_backlight(struct intel_connector *connector);
> void intel_panel_destroy_backlight(struct drm_connector *connector);
> -void intel_panel_init_backlight_funcs(struct drm_device *dev);
> enum drm_connector_status intel_panel_detect(struct drm_device *dev);
> extern struct drm_display_mode *intel_find_panel_downclock(
> struct drm_device *dev,
> diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
> index 2034438a0664..9adb62b1b99f 100644
> --- a/drivers/gpu/drm/i915/intel_panel.c
> +++ b/drivers/gpu/drm/i915/intel_panel.c
> @@ -566,7 +566,7 @@ static u32 intel_panel_get_backlight(struct intel_connector *connector)
> mutex_lock(&dev_priv->backlight_lock);
>
> if (panel->backlight.enabled) {
> - val = dev_priv->display.get_backlight(connector);
> + val = panel->backlight.get(connector);
> val = intel_panel_compute_brightness(connector, val);
> }
>
> @@ -655,13 +655,12 @@ static void pwm_set_backlight(struct intel_connector *connector, u32 level)
> static void
> intel_panel_actually_set_backlight(struct intel_connector *connector, u32 level)
> {
> - struct drm_device *dev = connector->base.dev;
> - struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_panel *panel = &connector->panel;
>
> DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level);
>
> level = intel_panel_compute_brightness(connector, level);
> - dev_priv->display.set_backlight(connector, level);
> + panel->backlight.set(connector, level);
> }
>
> /* set backlight brightness to level in range [0..max], scaling wrt hw min */
> @@ -836,7 +835,7 @@ void intel_panel_disable_backlight(struct intel_connector *connector)
> if (panel->backlight.device)
> panel->backlight.device->props.power = FB_BLANK_POWERDOWN;
> panel->backlight.enabled = false;
> - dev_priv->display.disable_backlight(connector);
> + panel->backlight.disable(connector);
>
> mutex_unlock(&dev_priv->backlight_lock);
> }
> @@ -1085,7 +1084,7 @@ void intel_panel_enable_backlight(struct intel_connector *connector)
> panel->backlight.device->props.max_brightness);
> }
>
> - dev_priv->display.enable_backlight(connector);
> + panel->backlight.enable(connector);
> panel->backlight.enabled = true;
> if (panel->backlight.device)
> panel->backlight.device->props.power = FB_BLANK_UNBLANK;
> @@ -1113,10 +1112,10 @@ static int intel_backlight_device_update_status(struct backlight_device *bd)
> * callback needs to take this into account.
> */
> if (panel->backlight.enabled) {
> - if (panel->backlight_power) {
> + if (panel->backlight.power) {
> bool enable = bd->props.power == FB_BLANK_UNBLANK &&
> bd->props.brightness != 0;
> - panel->backlight_power(connector, enable);
> + panel->backlight.power(connector, enable);
> }
> } else {
> bd->props.power = FB_BLANK_POWERDOWN;
> @@ -1341,6 +1340,7 @@ static u32 get_backlight_max_vbt(struct intel_connector *connector)
> {
> struct drm_device *dev = connector->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
> + struct intel_panel *panel = &connector->panel;
> u16 pwm_freq_hz = dev_priv->vbt.backlight.pwm_freq_hz;
> u32 pwm;
>
> @@ -1349,12 +1349,12 @@ static u32 get_backlight_max_vbt(struct intel_connector *connector)
> return 0;
> }
>
> - if (!dev_priv->display.backlight_hz_to_pwm) {
> + if (!panel->backlight.hz_to_pwm) {
> DRM_DEBUG_KMS("backlight frequency setting from VBT currently not supported on this platform\n");
> return 0;
> }
>
> - pwm = dev_priv->display.backlight_hz_to_pwm(connector, pwm_freq_hz);
> + pwm = panel->backlight.hz_to_pwm(connector, pwm_freq_hz);
> if (!pwm) {
> DRM_DEBUG_KMS("backlight frequency conversion failed\n");
> return 0;
> @@ -1639,9 +1639,13 @@ int intel_panel_setup_backlight(struct drm_connector *connector, enum pipe pipe)
> }
> }
>
> + /* ensure intel_panel has been initialized first */
> + if (WARN_ON(!panel->backlight.setup))
> + return -ENODEV;
> +
> /* set level and max in panel struct */
> mutex_lock(&dev_priv->backlight_lock);
> - ret = dev_priv->display.setup_backlight(intel_connector, pipe);
> + ret = panel->backlight.setup(intel_connector, pipe);
> mutex_unlock(&dev_priv->backlight_lock);
>
> if (ret) {
> @@ -1673,62 +1677,66 @@ void intel_panel_destroy_backlight(struct drm_connector *connector)
> }
>
> /* Set up chip specific backlight functions */
> -void intel_panel_init_backlight_funcs(struct drm_device *dev)
> +static void
> +intel_panel_init_backlight_funcs(struct intel_panel *panel)
> {
> + struct intel_connector *intel_connector =
> + container_of(panel, struct intel_connector, panel);
> + struct drm_device *dev = intel_connector->base.dev;
> struct drm_i915_private *dev_priv = dev->dev_private;
>
> if (IS_BROXTON(dev)) {
> - dev_priv->display.setup_backlight = bxt_setup_backlight;
> - dev_priv->display.enable_backlight = bxt_enable_backlight;
> - dev_priv->display.disable_backlight = bxt_disable_backlight;
> - dev_priv->display.set_backlight = bxt_set_backlight;
> - dev_priv->display.get_backlight = bxt_get_backlight;
> + panel->backlight.setup = bxt_setup_backlight;
> + panel->backlight.enable = bxt_enable_backlight;
> + panel->backlight.disable = bxt_disable_backlight;
> + panel->backlight.set = bxt_set_backlight;
> + panel->backlight.get = bxt_get_backlight;
> } else if (HAS_PCH_LPT(dev) || HAS_PCH_SPT(dev)) {
> - dev_priv->display.setup_backlight = lpt_setup_backlight;
> - dev_priv->display.enable_backlight = lpt_enable_backlight;
> - dev_priv->display.disable_backlight = lpt_disable_backlight;
> - dev_priv->display.set_backlight = lpt_set_backlight;
> - dev_priv->display.get_backlight = lpt_get_backlight;
> + panel->backlight.setup = lpt_setup_backlight;
> + panel->backlight.enable = lpt_enable_backlight;
> + panel->backlight.disable = lpt_disable_backlight;
> + panel->backlight.set = lpt_set_backlight;
> + panel->backlight.get = lpt_get_backlight;
> if (HAS_PCH_LPT(dev))
> - dev_priv->display.backlight_hz_to_pwm = lpt_hz_to_pwm;
> + panel->backlight.hz_to_pwm = lpt_hz_to_pwm;
> else
> - dev_priv->display.backlight_hz_to_pwm = spt_hz_to_pwm;
> + panel->backlight.hz_to_pwm = spt_hz_to_pwm;
> } else if (HAS_PCH_SPLIT(dev)) {
> - dev_priv->display.setup_backlight = pch_setup_backlight;
> - dev_priv->display.enable_backlight = pch_enable_backlight;
> - dev_priv->display.disable_backlight = pch_disable_backlight;
> - dev_priv->display.set_backlight = pch_set_backlight;
> - dev_priv->display.get_backlight = pch_get_backlight;
> - dev_priv->display.backlight_hz_to_pwm = pch_hz_to_pwm;
> + panel->backlight.setup = pch_setup_backlight;
> + panel->backlight.enable = pch_enable_backlight;
> + panel->backlight.disable = pch_disable_backlight;
> + panel->backlight.set = pch_set_backlight;
> + panel->backlight.get = pch_get_backlight;
> + panel->backlight.hz_to_pwm = pch_hz_to_pwm;
> } else if (IS_VALLEYVIEW(dev)) {
> if (dev_priv->vbt.has_mipi) {
> - dev_priv->display.setup_backlight = pwm_setup_backlight;
> - dev_priv->display.enable_backlight = pwm_enable_backlight;
> - dev_priv->display.disable_backlight = pwm_disable_backlight;
> - dev_priv->display.set_backlight = pwm_set_backlight;
> - dev_priv->display.get_backlight = pwm_get_backlight;
> + panel->backlight.setup = pwm_setup_backlight;
> + panel->backlight.enable = pwm_enable_backlight;
> + panel->backlight.disable = pwm_disable_backlight;
> + panel->backlight.set = pwm_set_backlight;
> + panel->backlight.get = pwm_get_backlight;
> } else {
> - dev_priv->display.setup_backlight = vlv_setup_backlight;
> - dev_priv->display.enable_backlight = vlv_enable_backlight;
> - dev_priv->display.disable_backlight = vlv_disable_backlight;
> - dev_priv->display.set_backlight = vlv_set_backlight;
> - dev_priv->display.get_backlight = vlv_get_backlight;
> - dev_priv->display.backlight_hz_to_pwm = vlv_hz_to_pwm;
> + panel->backlight.setup = vlv_setup_backlight;
> + panel->backlight.enable = vlv_enable_backlight;
> + panel->backlight.disable = vlv_disable_backlight;
> + panel->backlight.set = vlv_set_backlight;
> + panel->backlight.get = vlv_get_backlight;
> + panel->backlight.hz_to_pwm = vlv_hz_to_pwm;
> }
> } else if (IS_GEN4(dev)) {
> - dev_priv->display.setup_backlight = i965_setup_backlight;
> - dev_priv->display.enable_backlight = i965_enable_backlight;
> - dev_priv->display.disable_backlight = i965_disable_backlight;
> - dev_priv->display.set_backlight = i9xx_set_backlight;
> - dev_priv->display.get_backlight = i9xx_get_backlight;
> - dev_priv->display.backlight_hz_to_pwm = i965_hz_to_pwm;
> + panel->backlight.setup = i965_setup_backlight;
> + panel->backlight.enable = i965_enable_backlight;
> + panel->backlight.disable = i965_disable_backlight;
> + panel->backlight.set = i9xx_set_backlight;
> + panel->backlight.get = i9xx_get_backlight;
> + panel->backlight.hz_to_pwm = i965_hz_to_pwm;
> } else {
> - dev_priv->display.setup_backlight = i9xx_setup_backlight;
> - dev_priv->display.enable_backlight = i9xx_enable_backlight;
> - dev_priv->display.disable_backlight = i9xx_disable_backlight;
> - dev_priv->display.set_backlight = i9xx_set_backlight;
> - dev_priv->display.get_backlight = i9xx_get_backlight;
> - dev_priv->display.backlight_hz_to_pwm = i9xx_hz_to_pwm;
> + panel->backlight.setup = i9xx_setup_backlight;
> + panel->backlight.enable = i9xx_enable_backlight;
> + panel->backlight.disable = i9xx_disable_backlight;
> + panel->backlight.set = i9xx_set_backlight;
> + panel->backlight.get = i9xx_get_backlight;
> + panel->backlight.hz_to_pwm = i9xx_hz_to_pwm;
> }
> }
>
> @@ -1736,6 +1744,8 @@ int intel_panel_init(struct intel_panel *panel,
> struct drm_display_mode *fixed_mode,
> struct drm_display_mode *downclock_mode)
> {
> + intel_panel_init_backlight_funcs(panel);
> +
> panel->fixed_mode = fixed_mode;
> panel->downclock_mode = downclock_mode;
>
> --
> 2.1.4
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2015-09-14 14:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-14 11:03 [PATCH 0/1] drm/i915: connector specific backlight hooks for eDP/DSI Jani Nikula
2015-09-14 11:03 ` [PATCH 1/1] drm/i915: make backlight hooks connector specific Jani Nikula
2015-09-14 14:17 ` Daniel Vetter [this message]
2015-09-15 7:00 ` Jani Nikula
2015-09-29 10:10 ` Deepak, M
2015-09-29 9:43 ` Adebisi, YetundeX
2015-09-14 12:29 ` [PATCH 0/1] drm/i915: connector specific backlight hooks for eDP/DSI Jani Nikula
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150914141743.GK3383@phenom.ffwll.local \
--to=daniel@ffwll.ch \
--cc=intel-gfx@lists.freedesktop.org \
--cc=jani.nikula@intel.com \
--cc=m.deepak@intel.com \
--cc=yetundex.adebisi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.