All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed
From: Romain Gantois <romain.gantois@bootlin.com>
To: Serge Semin <fancer.lancer@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	 Jose Abreu <joabreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	 Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	 Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	 Yanteng Si <siyanteng@loongson.cn>,
	 Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	 Bhadram Varka <vbhadram@nvidia.com>,
	Simon Horman <horms@kernel.org>,
	 Huacai Chen <chenhuacai@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Samuel Holland <samuel@sholland.org>,
	netdev@vger.kernel.org,
	 linux-stm32@st-md-mailman.stormreply.com,
	 linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,  linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 1/4] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
Date: Tue, 16 Apr 2024 09:39:20 +0200 (CEST)	[thread overview]
Message-ID: <7db899b0-4547-2c4c-60a5-8321d698cce4@bootlin.com> (raw)
In-Reply-To: <20240412180340.7965-2-fancer.lancer@gmail.com>

On Fri, 12 Apr 2024, Serge Semin wrote:

> There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
> enabled:
> DW GMAC v3.7+ with AV feature,
> DW QoS Eth v4.x/v5.x,
> DW XGMAC/XLGMAC
> Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
> support the half-duplex link mode in case if more than one queues enabled:
> 
> "In multiple queue/channel configurations, for half-duplex operation,
> enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
> full-duplex operation, any queue/channel can be enabled."
> 
> The rest of the IP-cores don't have such constraint. Thus in order to have
> the constraint applied for the DW QoS Eth MACs only, let's move the it'
> implementation to the respective MAC-capabilities getter and make sure the
> getter is called in the queues re-init procedure.
> 
> Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode")
> Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  7 +++++++
>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++----------------
>  2 files changed, 10 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> index cef25efbdff9..ec6a13e644b3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> @@ -71,6 +71,13 @@ static void dwmac4_core_init(struct mac_device_info *hw,
>  static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
>  {
>  	priv->phylink_config.mac_capabilities |= MAC_2500FD;
> +
> +	if (priv->plat->tx_queues_to_use > 1)
> +		priv->phylink_config.mac_capabilities &=
> +			~(MAC_10HD | MAC_100HD | MAC_1000HD);
> +	else
> +		priv->phylink_config.mac_capabilities |=
> +			(MAC_10HD | MAC_100HD | MAC_1000HD);
>  }
>  
>  static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 24cd80490d19..dd58c21b53ee 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev)
>  	return ret;
>  }
>  
> -static void stmmac_set_half_duplex(struct stmmac_priv *priv)
> -{
> -	/* Half-Duplex can only work with single tx queue */
> -	if (priv->plat->tx_queues_to_use > 1)
> -		priv->phylink_config.mac_capabilities &=
> -			~(MAC_10HD | MAC_100HD | MAC_1000HD);
> -	else
> -		priv->phylink_config.mac_capabilities |=
> -			(MAC_10HD | MAC_100HD | MAC_1000HD);
> -}
> -
>  static int stmmac_phy_setup(struct stmmac_priv *priv)
>  {
>  	struct stmmac_mdio_bus_data *mdio_bus_data;
> @@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
>  				    priv->phylink_config.supported_interfaces);
>  
>  	priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> -						MAC_10FD | MAC_100FD |
> -						MAC_1000FD;
> -
> -	stmmac_set_half_duplex(priv);
> +						MAC_10 | MAC_100 | MAC_1000;
>  
>  	/* Get the MAC specific capabilities */
>  	stmmac_mac_phylink_get_caps(priv);
> @@ -7355,7 +7341,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
>  			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
>  									rx_cnt);
>  
> -	stmmac_set_half_duplex(priv);
> +	stmmac_mac_phylink_get_caps(priv);
> +
>  	stmmac_napi_add(dev);
>  
>  	if (netif_running(dev))
> -- 
> 2.43.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Romain Gantois <romain.gantois@bootlin.com>
To: Serge Semin <fancer.lancer@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>,
	 Jose Abreu <joabreu@synopsys.com>,
	"David S. Miller" <davem@davemloft.net>,
	 Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	 Paolo Abeni <pabeni@redhat.com>,
	Russell King <linux@armlinux.org.uk>,
	 Yanteng Si <siyanteng@loongson.cn>,
	 Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	 Bhadram Varka <vbhadram@nvidia.com>,
	Simon Horman <horms@kernel.org>,
	 Huacai Chen <chenhuacai@kernel.org>,
	Chen-Yu Tsai <wens@csie.org>,
	 Jernej Skrabec <jernej.skrabec@gmail.com>,
	 Samuel Holland <samuel@sholland.org>,
	netdev@vger.kernel.org,
	 linux-stm32@st-md-mailman.stormreply.com,
	 linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev,  linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 1/4] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
Date: Tue, 16 Apr 2024 09:39:20 +0200 (CEST)	[thread overview]
Message-ID: <7db899b0-4547-2c4c-60a5-8321d698cce4@bootlin.com> (raw)
In-Reply-To: <20240412180340.7965-2-fancer.lancer@gmail.com>

On Fri, 12 Apr 2024, Serge Semin wrote:

> There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
> enabled:
> DW GMAC v3.7+ with AV feature,
> DW QoS Eth v4.x/v5.x,
> DW XGMAC/XLGMAC
> Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
> support the half-duplex link mode in case if more than one queues enabled:
> 
> "In multiple queue/channel configurations, for half-duplex operation,
> enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
> full-duplex operation, any queue/channel can be enabled."
> 
> The rest of the IP-cores don't have such constraint. Thus in order to have
> the constraint applied for the DW QoS Eth MACs only, let's move the it'
> implementation to the respective MAC-capabilities getter and make sure the
> getter is called in the queues re-init procedure.
> 
> Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode")
> Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  7 +++++++
>  .../net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++----------------
>  2 files changed, 10 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> index cef25efbdff9..ec6a13e644b3 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c
> @@ -71,6 +71,13 @@ static void dwmac4_core_init(struct mac_device_info *hw,
>  static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
>  {
>  	priv->phylink_config.mac_capabilities |= MAC_2500FD;
> +
> +	if (priv->plat->tx_queues_to_use > 1)
> +		priv->phylink_config.mac_capabilities &=
> +			~(MAC_10HD | MAC_100HD | MAC_1000HD);
> +	else
> +		priv->phylink_config.mac_capabilities |=
> +			(MAC_10HD | MAC_100HD | MAC_1000HD);
>  }
>  
>  static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> index 24cd80490d19..dd58c21b53ee 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> @@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev)
>  	return ret;
>  }
>  
> -static void stmmac_set_half_duplex(struct stmmac_priv *priv)
> -{
> -	/* Half-Duplex can only work with single tx queue */
> -	if (priv->plat->tx_queues_to_use > 1)
> -		priv->phylink_config.mac_capabilities &=
> -			~(MAC_10HD | MAC_100HD | MAC_1000HD);
> -	else
> -		priv->phylink_config.mac_capabilities |=
> -			(MAC_10HD | MAC_100HD | MAC_1000HD);
> -}
> -
>  static int stmmac_phy_setup(struct stmmac_priv *priv)
>  {
>  	struct stmmac_mdio_bus_data *mdio_bus_data;
> @@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
>  				    priv->phylink_config.supported_interfaces);
>  
>  	priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
> -						MAC_10FD | MAC_100FD |
> -						MAC_1000FD;
> -
> -	stmmac_set_half_duplex(priv);
> +						MAC_10 | MAC_100 | MAC_1000;
>  
>  	/* Get the MAC specific capabilities */
>  	stmmac_mac_phylink_get_caps(priv);
> @@ -7355,7 +7341,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt)
>  			priv->rss.table[i] = ethtool_rxfh_indir_default(i,
>  									rx_cnt);
>  
> -	stmmac_set_half_duplex(priv);
> +	stmmac_mac_phylink_get_caps(priv);
> +
>  	stmmac_napi_add(dev);
>  
>  	if (netif_running(dev))
> -- 
> 2.43.0
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> 

Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>

Thanks,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2024-04-16  7:38 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-12 18:03 [PATCH net 0/4] net: stmmac: Fix MAC-capabilities procedure Serge Semin
2024-04-12 18:03 ` Serge Semin
2024-04-12 18:03 ` [PATCH net 1/4] net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only Serge Semin
2024-04-12 18:03   ` Serge Semin
2024-04-16  7:39   ` Romain Gantois [this message]
2024-04-16  7:39     ` Romain Gantois
2024-04-12 18:03 ` [PATCH net 2/4] net: stmmac: Fix max-speed being ignored on queue re-init Serge Semin
2024-04-12 18:03   ` Serge Semin
2024-04-16  7:33   ` Romain Gantois
2024-04-16  7:33     ` Romain Gantois
2024-04-12 18:03 ` [PATCH net 3/4] net: stmmac: Fix IP-cores specific MAC capabilities Serge Semin
2024-04-12 18:03   ` Serge Semin
2024-04-16  8:00   ` Romain Gantois
2024-04-16  8:00     ` Romain Gantois
2024-04-12 18:03 ` [PATCH net-next 4/4] net: stmmac: Move MAC caps init to phylink MAC caps getter Serge Semin
2024-04-12 18:03   ` Serge Semin
2024-04-16  7:56   ` Romain Gantois
2024-04-16  7:56     ` Romain Gantois
2024-04-16 11:38     ` Serge Semin
2024-04-16 11:38       ` Serge Semin
2024-04-16 13:21       ` Romain Gantois
2024-04-16 13:21         ` Romain Gantois
2024-04-16 12:01     ` Russell King (Oracle)
2024-04-16 12:01       ` Russell King (Oracle)
2024-04-16 10:27   ` Paolo Abeni
2024-04-16 10:27     ` Paolo Abeni
2024-04-16 11:01     ` Serge Semin
2024-04-16 11:01       ` Serge Semin
2024-04-16 13:30 ` [PATCH net 0/4] net: stmmac: Fix MAC-capabilities procedure patchwork-bot+netdevbpf
2024-04-16 13:30   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=7db899b0-4547-2c4c-60a5-8321d698cce4@bootlin.com \
    --to=romain.gantois@bootlin.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=chenhuacai@kernel.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=fancer.lancer@gmail.com \
    --cc=horms@kernel.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=linux@armlinux.org.uk \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=samuel@sholland.org \
    --cc=siyanteng@loongson.cn \
    --cc=vbhadram@nvidia.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.