All the mail mirrored from lore.kernel.org
 help / color / mirror / Atom feed
From: Vinod Koul <vkoul@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: robh+dt@kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	kishon@ti.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2
Date: Mon, 21 Jun 2021 11:48:10 +0530	[thread overview]
Message-ID: <YNAvItt8BQH1QmQT@vkoul-mobl> (raw)
In-Reply-To: <20210604190338.2248295-3-martin.blumenstingl@googlemail.com>

On 04-06-21, 21:03, Martin Blumenstingl wrote:
> Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register
> region. Unfortunately only few register bits are documented. For
> HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor
> kernel.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/phy/amlogic/Kconfig              |  11 ++
>  drivers/phy/amlogic/Makefile             |   1 +
>  drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 150 +++++++++++++++++++++++
>  3 files changed, 162 insertions(+)
>  create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> 
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index db5d0cd757e3..e6c3a2a8b769 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -2,6 +2,17 @@
>  #
>  # Phy drivers for Amlogic platforms
>  #
> +config PHY_MESON8_HDMI_TX
> +	tristate "Meson8, Meson8b and Meson8m2 HDMI TX PHY driver"
> +	default ARCH_MESON
> +	depends on (ARCH_MESON && ARM) || COMPILE_TEST

depends on ARM seems redundant..

> + * Meson8, Meson8b and Meson8m2 HDMI TX PHY.
> + *
> + * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>

2021..
-- 
~Vinod

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: robh+dt@kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	kishon@ti.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2
Date: Mon, 21 Jun 2021 11:48:10 +0530	[thread overview]
Message-ID: <YNAvItt8BQH1QmQT@vkoul-mobl> (raw)
In-Reply-To: <20210604190338.2248295-3-martin.blumenstingl@googlemail.com>

On 04-06-21, 21:03, Martin Blumenstingl wrote:
> Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register
> region. Unfortunately only few register bits are documented. For
> HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor
> kernel.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/phy/amlogic/Kconfig              |  11 ++
>  drivers/phy/amlogic/Makefile             |   1 +
>  drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 150 +++++++++++++++++++++++
>  3 files changed, 162 insertions(+)
>  create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> 
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index db5d0cd757e3..e6c3a2a8b769 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -2,6 +2,17 @@
>  #
>  # Phy drivers for Amlogic platforms
>  #
> +config PHY_MESON8_HDMI_TX
> +	tristate "Meson8, Meson8b and Meson8m2 HDMI TX PHY driver"
> +	default ARCH_MESON
> +	depends on (ARCH_MESON && ARM) || COMPILE_TEST

depends on ARM seems redundant..

> + * Meson8, Meson8b and Meson8m2 HDMI TX PHY.
> + *
> + * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>

2021..
-- 
~Vinod

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: robh+dt@kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	kishon@ti.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2
Date: Mon, 21 Jun 2021 11:48:10 +0530	[thread overview]
Message-ID: <YNAvItt8BQH1QmQT@vkoul-mobl> (raw)
In-Reply-To: <20210604190338.2248295-3-martin.blumenstingl@googlemail.com>

On 04-06-21, 21:03, Martin Blumenstingl wrote:
> Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register
> region. Unfortunately only few register bits are documented. For
> HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor
> kernel.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/phy/amlogic/Kconfig              |  11 ++
>  drivers/phy/amlogic/Makefile             |   1 +
>  drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 150 +++++++++++++++++++++++
>  3 files changed, 162 insertions(+)
>  create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> 
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index db5d0cd757e3..e6c3a2a8b769 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -2,6 +2,17 @@
>  #
>  # Phy drivers for Amlogic platforms
>  #
> +config PHY_MESON8_HDMI_TX
> +	tristate "Meson8, Meson8b and Meson8m2 HDMI TX PHY driver"
> +	default ARCH_MESON
> +	depends on (ARCH_MESON && ARM) || COMPILE_TEST

depends on ARM seems redundant..

> + * Meson8, Meson8b and Meson8m2 HDMI TX PHY.
> + *
> + * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>

2021..
-- 
~Vinod

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

WARNING: multiple messages have this Message-ID (diff)
From: Vinod Koul <vkoul@kernel.org>
To: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: robh+dt@kernel.org, linux-phy@lists.infradead.org,
	devicetree@vger.kernel.org, linux-amlogic@lists.infradead.org,
	kishon@ti.com, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/2] phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2
Date: Mon, 21 Jun 2021 11:48:10 +0530	[thread overview]
Message-ID: <YNAvItt8BQH1QmQT@vkoul-mobl> (raw)
In-Reply-To: <20210604190338.2248295-3-martin.blumenstingl@googlemail.com>

On 04-06-21, 21:03, Martin Blumenstingl wrote:
> Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI register
> region. Unfortunately only few register bits are documented. For
> HHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendor
> kernel.
> 
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
>  drivers/phy/amlogic/Kconfig              |  11 ++
>  drivers/phy/amlogic/Makefile             |   1 +
>  drivers/phy/amlogic/phy-meson8-hdmi-tx.c | 150 +++++++++++++++++++++++
>  3 files changed, 162 insertions(+)
>  create mode 100644 drivers/phy/amlogic/phy-meson8-hdmi-tx.c
> 
> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
> index db5d0cd757e3..e6c3a2a8b769 100644
> --- a/drivers/phy/amlogic/Kconfig
> +++ b/drivers/phy/amlogic/Kconfig
> @@ -2,6 +2,17 @@
>  #
>  # Phy drivers for Amlogic platforms
>  #
> +config PHY_MESON8_HDMI_TX
> +	tristate "Meson8, Meson8b and Meson8m2 HDMI TX PHY driver"
> +	default ARCH_MESON
> +	depends on (ARCH_MESON && ARM) || COMPILE_TEST

depends on ARM seems redundant..

> + * Meson8, Meson8b and Meson8m2 HDMI TX PHY.
> + *
> + * Copyright (C) 2020 Martin Blumenstingl <martin.blumenstingl@googlemail.com>

2021..
-- 
~Vinod

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2021-06-21  6:18 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-04 19:03 [PATCH 0/2] phy: Add support for the HDMI TX PHY on Meson8/8b/8m2 Martin Blumenstingl
2021-06-04 19:03 ` Martin Blumenstingl
2021-06-04 19:03 ` Martin Blumenstingl
2021-06-04 19:03 ` Martin Blumenstingl
2021-06-04 19:03 ` [PATCH 1/2] dt-bindings: phy: Add the Amlogic Meson8 HDMI TX PHY bindings Martin Blumenstingl
2021-06-04 19:03   ` Martin Blumenstingl
2021-06-04 19:03   ` Martin Blumenstingl
2021-06-04 19:03   ` Martin Blumenstingl
2021-06-16 23:31   ` Rob Herring
2021-06-16 23:31     ` Rob Herring
2021-06-16 23:31     ` Rob Herring
2021-06-16 23:31     ` Rob Herring
2021-06-17 22:30     ` Martin Blumenstingl
2021-06-17 22:30       ` Martin Blumenstingl
2021-06-17 22:30       ` Martin Blumenstingl
2021-06-17 22:30       ` Martin Blumenstingl
2021-06-04 19:03 ` [PATCH 2/2] phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2 Martin Blumenstingl
2021-06-04 19:03   ` Martin Blumenstingl
2021-06-04 19:03   ` Martin Blumenstingl
2021-06-04 19:03   ` Martin Blumenstingl
2021-06-21  6:18   ` Vinod Koul [this message]
2021-06-21  6:18     ` Vinod Koul
2021-06-21  6:18     ` Vinod Koul
2021-06-21  6:18     ` Vinod Koul
2021-06-22 19:57     ` Martin Blumenstingl
2021-06-22 19:57       ` Martin Blumenstingl
2021-06-22 19:57       ` Martin Blumenstingl
2021-06-22 19:57       ` Martin Blumenstingl

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=YNAvItt8BQH1QmQT@vkoul-mobl \
    --to=vkoul@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.