From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
To: <nicolas.ferre@atmel.com>, <boris.brezillon@free-electrons.com>,
<alexandre.belloni@free-electrons.com>, <sameo@linux.intel.com>,
<lee.jones@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <robh+dt@kernel.org>,
<pawel.moll@arm.com>, <mark.rutland@arm.com>,
<ijc+devicetree@hellion.org.uk>, <galak@codeaurora.org>,
<devicetree@vger.kernel.org>,
Cyrille Pitchen <cyrille.pitchen@atmel.com>
Subject: [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom
Date: Thu, 18 Jun 2015 15:05:08 +0200 [thread overview]
Message-ID: <cover.1434632230.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v2:
- enhance the documentation of DT bindings and change the way the "ranges"
property is used.
- replace __raw_readl() and __raw_writel() by readl() and writel().
- change the module license to "GPL" for v2 or later
- print the selected flexcom mode after the hardware version
v1:
This series of patches a support to the Atmel Flexcom, a wrapper which
integrates an USART, a SPI controller and a TWI controller. Only one
peripheral can be used at a time. The active function is selected though
the Flexcom Mode Register.
Cyrille Pitchen (2):
mfd: devicetree: add bindings for Atmel Flexcom
mfd: flexcom: add a driver for Atmel Flexible Serial Communication
Unit
.../devicetree/bindings/mfd/atmel-flexcom.txt | 58 +++++++++++++
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-flexcom.c | 97 ++++++++++++++++++++++
4 files changed, 167 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
create mode 100644 drivers/mfd/atmel-flexcom.c
--
1.8.2.2
WARNING: multiple messages have this Message-ID (diff)
From: Cyrille Pitchen <cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
To: nicolas.ferre-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org,
boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Cyrille Pitchen
<cyrille.pitchen-AIFe0yeh4nAAvxtiuMwx3w@public.gmane.org>
Subject: [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom
Date: Thu, 18 Jun 2015 15:05:08 +0200 [thread overview]
Message-ID: <cover.1434632230.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v2:
- enhance the documentation of DT bindings and change the way the "ranges"
property is used.
- replace __raw_readl() and __raw_writel() by readl() and writel().
- change the module license to "GPL" for v2 or later
- print the selected flexcom mode after the hardware version
v1:
This series of patches a support to the Atmel Flexcom, a wrapper which
integrates an USART, a SPI controller and a TWI controller. Only one
peripheral can be used at a time. The active function is selected though
the Flexcom Mode Register.
Cyrille Pitchen (2):
mfd: devicetree: add bindings for Atmel Flexcom
mfd: flexcom: add a driver for Atmel Flexible Serial Communication
Unit
.../devicetree/bindings/mfd/atmel-flexcom.txt | 58 +++++++++++++
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-flexcom.c | 97 ++++++++++++++++++++++
4 files changed, 167 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
create mode 100644 drivers/mfd/atmel-flexcom.c
--
1.8.2.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: cyrille.pitchen@atmel.com (Cyrille Pitchen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom
Date: Thu, 18 Jun 2015 15:05:08 +0200 [thread overview]
Message-ID: <cover.1434632230.git.cyrille.pitchen@atmel.com> (raw)
ChangeLog
v2:
- enhance the documentation of DT bindings and change the way the "ranges"
property is used.
- replace __raw_readl() and __raw_writel() by readl() and writel().
- change the module license to "GPL" for v2 or later
- print the selected flexcom mode after the hardware version
v1:
This series of patches a support to the Atmel Flexcom, a wrapper which
integrates an USART, a SPI controller and a TWI controller. Only one
peripheral can be used at a time. The active function is selected though
the Flexcom Mode Register.
Cyrille Pitchen (2):
mfd: devicetree: add bindings for Atmel Flexcom
mfd: flexcom: add a driver for Atmel Flexible Serial Communication
Unit
.../devicetree/bindings/mfd/atmel-flexcom.txt | 58 +++++++++++++
drivers/mfd/Kconfig | 11 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/atmel-flexcom.c | 97 ++++++++++++++++++++++
4 files changed, 167 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt
create mode 100644 drivers/mfd/atmel-flexcom.c
--
1.8.2.2
next reply other threads:[~2015-06-18 13:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-18 13:05 Cyrille Pitchen [this message]
2015-06-18 13:05 ` [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom Cyrille Pitchen
2015-06-18 13:05 ` Cyrille Pitchen
2015-06-18 13:05 ` [PATCH v2 1/2] mfd: devicetree: add bindings for Atmel Flexcom Cyrille Pitchen
2015-06-18 13:05 ` Cyrille Pitchen
2015-06-18 13:05 ` Cyrille Pitchen
2015-06-18 13:05 ` [PATCH v2 2/2] mfd: flexcom: add a driver for Atmel Flexible Serial Communication Unit Cyrille Pitchen
2015-06-18 13:05 ` Cyrille Pitchen
2015-06-18 13:05 ` Cyrille Pitchen
2015-06-19 7:34 ` Paul Bolle
2015-06-19 7:34 ` Paul Bolle
2015-06-19 7:34 ` Paul Bolle
2015-06-18 13:09 ` [PATCH v2 0/2] mfd: flexcom: add a driver for Flexcom Boris Brezillon
2015-06-18 13:09 ` Boris Brezillon
2015-06-18 13:09 ` Boris Brezillon
2015-06-18 14:52 ` Alexandre Belloni
2015-06-18 14:52 ` Alexandre Belloni
2015-06-18 14:52 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cover.1434632230.git.cyrille.pitchen@atmel.com \
--to=cyrille.pitchen@atmel.com \
--cc=alexandre.belloni@free-electrons.com \
--cc=boris.brezillon@free-electrons.com \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=nicolas.ferre@atmel.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.