From: Xilin Wu <wuxilin123@gmail.com>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Junhao Xie" <bigfoot@classfun.cn>,
"Neil Armstrong" <neil.armstrong@linaro.org>,
"Jessica Zhang" <quic_jesszhan@quicinc.com>,
"Sam Ravnborg" <sam@ravnborg.org>,
"David Airlie" <airlied@gmail.com>,
"Daniel Vetter" <daniel@ffwll.ch>,
"Maarten Lankhorst" <maarten.lankhorst@linux.intel.com>,
"Maxime Ripard" <mripard@kernel.org>,
"Thomas Zimmermann" <tzimmermann@suse.de>,
"Bjorn Andersson" <andersson@kernel.org>,
"Konrad Dybcio" <konrad.dybcio@linaro.org>,
"Tengfei Fan" <quic_tengfan@quicinc.com>,
"Molly Sophia" <mollysophia379@gmail.com>,
"Junhao Xie" <bigfoot@classfun.cn>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-arm-msm@vger.kernel.org, Xilin Wu <wuxilin123@gmail.com>
Subject: [PATCH 04/10] drm/panel: Add driver for Synaptics TD4328 LCD panel
Date: Wed, 24 Apr 2024 23:29:09 +0800 [thread overview]
Message-ID: <20240424-ayn-odin2-initial-v1-4-e0aa05c991fd@gmail.com> (raw)
In-Reply-To: <20240424-ayn-odin2-initial-v1-0-e0aa05c991fd@gmail.com>
Add support for the 1920x1080 LCD panel driven by the Synaptics
TD4328 IC, as found on AYN Odin 2.
Co-developed-by: Junhao Xie <bigfoot@classfun.cn>
Signed-off-by: Junhao Xie <bigfoot@classfun.cn>
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
---
drivers/gpu/drm/panel/Kconfig | 10 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-synaptics-td4328.c | 246 +++++++++++++++++++++++++
3 files changed, 257 insertions(+)
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index ab67789e59a2..69852a35eccd 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -845,6 +845,16 @@ config DRM_PANEL_SYNAPTICS_R63353
Say Y if you want to enable support for panels based on the
Synaptics R63353 controller.
+config DRM_PANEL_SYNAPTICS_TD4328
+ tristate "Synaptics TD4328-based panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_KMS_HELPER
+ help
+ Say Y if you want to enable support for panels based on the
+ Synaptics TD4328 controller.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 0b40b010e8e7..927013e3eb11 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
obj-$(CONFIG_DRM_PANEL_SYNAPTICS_R63353) += panel-synaptics-r63353.o
+obj-$(CONFIG_DRM_PANEL_SYNAPTICS_TD4328) += panel-synaptics-td4328.o
obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
diff --git a/drivers/gpu/drm/panel/panel-synaptics-td4328.c b/drivers/gpu/drm/panel/panel-synaptics-td4328.c
new file mode 100644
index 000000000000..0fb0ddd9373d
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-synaptics-td4328.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree.
+ * Copyright (c) 2024 Xilin Wu <wuxilin123@gmail.com>
+ * Copyright (c) 2024 Junhao Xie <bigfoot@classfun.cn>
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_probe_helper.h>
+
+struct td4328 {
+ struct drm_panel panel;
+ struct mipi_dsi_device *dsi;
+ struct regulator_bulk_data supplies[2];
+ struct gpio_desc *reset_gpio;
+};
+
+static inline struct td4328 *to_td4328(struct drm_panel *panel)
+{
+ return container_of(panel, struct td4328, panel);
+}
+
+static void td4328_reset(struct td4328 *ctx)
+{
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ usleep_range(10000, 11000);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+ usleep_range(10000, 11000);
+}
+
+static int td4328_on(struct td4328 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags |= MIPI_DSI_MODE_LPM;
+
+ mipi_dsi_dcs_write_seq(dsi, 0xb0, 0x00);
+ mipi_dsi_dcs_write_seq(dsi, 0xb3, 0x31);
+ mipi_dsi_dcs_write_seq(dsi, 0xd6, 0x00);
+
+ ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(70);
+
+ ret = mipi_dsi_dcs_set_display_on(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display on: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int td4328_off(struct td4328 *ctx)
+{
+ struct mipi_dsi_device *dsi = ctx->dsi;
+ struct device *dev = &dsi->dev;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_set_display_off(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set display off: %d\n", ret);
+ return ret;
+ }
+ msleep(50);
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
+ return ret;
+ }
+ msleep(120);
+
+ return 0;
+}
+
+static int td4328_prepare(struct drm_panel *panel)
+{
+ struct td4328 *ctx = to_td4328(panel);
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ if (ret < 0) {
+ dev_err(dev, "Failed to enable regulators: %d\n", ret);
+ return ret;
+ }
+
+ td4328_reset(ctx);
+
+ ret = td4328_on(ctx);
+ if (ret < 0) {
+ dev_err(dev, "Failed to initialize panel: %d\n", ret);
+ gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int td4328_unprepare(struct drm_panel *panel)
+{
+ struct td4328 *ctx = to_td4328(panel);
+ struct device *dev = &ctx->dsi->dev;
+ int ret;
+
+ ret = td4328_off(ctx);
+ if (ret < 0)
+ dev_err(dev, "Failed to un-initialize panel: %d\n", ret);
+
+ regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+
+ return 0;
+}
+
+static const struct drm_display_mode td4328_mode = {
+ .clock = (1080 + 93 + 1 + 47) * (1920 + 40 + 2 + 60) * 60 / 1000,
+ .hdisplay = 1080,
+ .hsync_start = 1080 + 93,
+ .hsync_end = 1080 + 93 + 1,
+ .htotal = 1080 + 93 + 1 + 47,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 40,
+ .vsync_end = 1920 + 40 + 2,
+ .vtotal = 1920 + 40 + 2 + 60,
+ .width_mm = 75,
+ .height_mm = 133,
+ .type = DRM_MODE_TYPE_DRIVER,
+};
+
+static int td4328_get_modes(struct drm_panel *panel,
+ struct drm_connector *connector)
+{
+ return drm_connector_helper_get_modes_fixed(connector, &td4328_mode);
+}
+
+static enum drm_panel_orientation td4328_get_orientation(struct drm_panel *panel)
+{
+ return DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+}
+
+static const struct drm_panel_funcs td4328_panel_funcs = {
+ .prepare = td4328_prepare,
+ .disable = td4328_unprepare,
+ .get_modes = td4328_get_modes,
+ .get_orientation = td4328_get_orientation,
+};
+
+static int td4328_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct td4328 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->supplies[0].supply = "vddio";
+ ctx->supplies[1].supply = "vdd";
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+ ctx->supplies);
+ if (ret < 0)
+ return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+ ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(ctx->reset_gpio))
+ return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio),
+ "Failed to get reset-gpios\n");
+
+ ctx->dsi = dsi;
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ dsi->lanes = 4;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
+ MIPI_DSI_CLOCK_NON_CONTINUOUS;
+
+ drm_panel_init(&ctx->panel, dev, &td4328_panel_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ ctx->panel.prepare_prev_first = true;
+
+ ret = drm_panel_of_backlight(&ctx->panel);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get backlight\n");
+
+ drm_panel_add(&ctx->panel);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "Failed to attach to DSI host\n");
+ drm_panel_remove(&ctx->panel);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void td4328_remove(struct mipi_dsi_device *dsi)
+{
+ struct td4328 *ctx = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+ drm_panel_remove(&ctx->panel);
+}
+
+static const struct of_device_id td4328_of_match[] = {
+ { .compatible = "syna,td4328" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, td4328_of_match);
+
+static struct mipi_dsi_driver td4328_driver = {
+ .probe = td4328_probe,
+ .remove = td4328_remove,
+ .driver = {
+ .name = "panel-td4328",
+ .of_match_table = td4328_of_match,
+ },
+};
+module_mipi_dsi_driver(td4328_driver);
+
+MODULE_DESCRIPTION("DRM driver for td4328-equipped DSI panels");
+MODULE_LICENSE("GPL");
--
2.44.0
next prev parent reply other threads:[~2024-04-24 15:29 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-24 15:29 [PATCH 00/10] AYN Odin 2 support Xilin Wu
2024-04-24 15:29 ` [PATCH 01/10] dt-bindings: pwm: Add SI-EN SN3112 PWM support Xilin Wu
2024-04-24 15:29 ` [PATCH 02/10] " Xilin Wu
2024-04-24 15:29 ` [PATCH 03/10] dt-bindings: display: panel: Add Synaptics TD4328 Xilin Wu
2024-04-24 15:29 ` Xilin Wu [this message]
2024-04-24 15:29 ` [PATCH 05/10] arm64: dts: qcom: pmk8550: Add PWM controller Xilin Wu
2024-04-24 15:29 ` [PATCH 06/10] arm64: dts: qcom: sm8550: Add UART15 Xilin Wu
2024-04-24 15:29 ` [PATCH 07/10] arm64: dts: qcom: sm8550: Update EAS properties Xilin Wu
2024-04-24 15:29 ` [PATCH 08/10] dt-bindings: vendor-prefixes: Add AYN Technologies Xilin Wu
2024-04-24 15:29 ` [PATCH 09/10] dt-bindings: arm: qcom: Add AYN Odin 2 Xilin Wu
2024-04-24 15:29 ` [PATCH 10/10] arm64: dts: " Xilin Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240424-ayn-odin2-initial-v1-4-e0aa05c991fd@gmail.com \
--to=wuxilin123@gmail.com \
--cc=airlied@gmail.com \
--cc=andersson@kernel.org \
--cc=bigfoot@classfun.cn \
--cc=conor+dt@kernel.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=konrad.dybcio@linaro.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mollysophia379@gmail.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=quic_jesszhan@quicinc.com \
--cc=quic_tengfan@quicinc.com \
--cc=robh@kernel.org \
--cc=sam@ravnborg.org \
--cc=tzimmermann@suse.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).